linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Pingfan Liu <kernelfans@gmail.com>
To: x86@kernel.org, linux-acpi@vger.kernel.org
Cc: Pingfan Liu <kernelfans@gmail.com>,
	Thomas Gleixner <tglx@linutronix.de>,
	Ingo Molnar <mingo@redhat.com>, Borislav Petkov <bp@alien8.de>,
	"H. Peter Anvin" <hpa@zytor.com>,
	Dave Hansen <dave.hansen@linux.intel.com>,
	Andy Lutomirski <luto@kernel.org>,
	Peter Zijlstra <peterz@infradead.org>,
	"Rafael J. Wysocki" <rjw@rjwysocki.net>,
	Len Brown <lenb@kernel.org>,
	linux-kernel@vger.kernel.org
Subject: [RFC PATCH 1/4] acpi: change the topo of acpi_table_upgrade()
Date: Mon,  7 Jan 2019 16:24:42 +0800	[thread overview]
Message-ID: <1546849485-27933-2-git-send-email-kernelfans@gmail.com> (raw)
In-Reply-To: <1546849485-27933-1-git-send-email-kernelfans@gmail.com>

The current acpi_table_upgrade() relies on initrd_start, but this var is
only valid after relocate_initrd(). There is requirement to extract the
acpi info from initrd before memblock-allocator can work(see [2/4]), hence
acpi_table_upgrade() need to accept the input param directly.

Signed-off-by: Pingfan Liu <kernelfans@gmail.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net>
Cc: Len Brown <lenb@kernel.org>
Cc: linux-kernel@vger.kernel.org
---
 arch/arm64/kernel/setup.c | 2 +-
 arch/x86/kernel/setup.c   | 2 +-
 drivers/acpi/tables.c     | 4 +---
 include/linux/acpi.h      | 4 ++--
 4 files changed, 5 insertions(+), 7 deletions(-)

diff --git a/arch/arm64/kernel/setup.c b/arch/arm64/kernel/setup.c
index 4b0e123..48cb98c 100644
--- a/arch/arm64/kernel/setup.c
+++ b/arch/arm64/kernel/setup.c
@@ -315,7 +315,7 @@ void __init setup_arch(char **cmdline_p)
 	paging_init();
 	efi_apply_persistent_mem_reservations();
 
-	acpi_table_upgrade();
+	acpi_table_upgrade((void *)initrd_start, initrd_end - initrd_start);
 
 	/* Parse the ACPI tables for possible boot-time configuration */
 	acpi_boot_table_init();
diff --git a/arch/x86/kernel/setup.c b/arch/x86/kernel/setup.c
index 3d872a5..acbcd62 100644
--- a/arch/x86/kernel/setup.c
+++ b/arch/x86/kernel/setup.c
@@ -1175,8 +1175,8 @@ void __init setup_arch(char **cmdline_p)
 
 	reserve_initrd();
 
-	acpi_table_upgrade();
 
+	acpi_table_upgrade((void *)initrd_start, initrd_end - initrd_start);
 	vsmp_init();
 
 	io_delay_init();
diff --git a/drivers/acpi/tables.c b/drivers/acpi/tables.c
index 48eabb6..d29b05c 100644
--- a/drivers/acpi/tables.c
+++ b/drivers/acpi/tables.c
@@ -471,10 +471,8 @@ static DECLARE_BITMAP(acpi_initrd_installed, NR_ACPI_INITRD_TABLES);
 
 #define MAP_CHUNK_SIZE   (NR_FIX_BTMAPS << PAGE_SHIFT)
 
-void __init acpi_table_upgrade(void)
+void __init acpi_table_upgrade(void *data, size_t size)
 {
-	void *data = (void *)initrd_start;
-	size_t size = initrd_end - initrd_start;
 	int sig, no, table_nr = 0, total_offset = 0;
 	long offset = 0;
 	struct acpi_table_header *table;
diff --git a/include/linux/acpi.h b/include/linux/acpi.h
index 87715f2..44dcbba 100644
--- a/include/linux/acpi.h
+++ b/include/linux/acpi.h
@@ -1272,9 +1272,9 @@ acpi_graph_get_remote_endpoint(const struct fwnode_handle *fwnode,
 #endif
 
 #ifdef CONFIG_ACPI_TABLE_UPGRADE
-void acpi_table_upgrade(void);
+void acpi_table_upgrade(void *data, size_t size);
 #else
-static inline void acpi_table_upgrade(void) { }
+static inline void acpi_table_upgrade(void *data, size_t size) { }
 #endif
 
 #if defined(CONFIG_ACPI) && defined(CONFIG_ACPI_WATCHDOG)
-- 
2.7.4


  reply	other threads:[~2019-01-07  8:25 UTC|newest]

Thread overview: 18+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-01-07  8:24 [RFC PATCH 0/4] x86_64/mm: remove bottom-up allocation style by pushing forward the parsing of mem hotplug info Pingfan Liu
2019-01-07  8:24 ` Pingfan Liu [this message]
2019-01-07 10:55   ` [RFC PATCH 1/4] acpi: change the topo of acpi_table_upgrade() Rafael J. Wysocki
2019-01-07  8:24 ` [RFC PATCH 2/4] x86/setup: parse acpi to get hotplug info before init_mem_mapping() Pingfan Liu
2019-01-07 12:52   ` Pingfan Liu
2019-01-07 17:11   ` Dave Hansen
2019-01-08  6:30     ` Pingfan Liu
2019-01-07  8:24 ` [RFC PATCH 3/4] x86/mm: set allowed range for memblock allocator Pingfan Liu
2019-01-07  8:24 ` [RFC PATCH 4/4] x86/mm: remove bottom-up allocation style for x86_64 Pingfan Liu
2019-01-07 17:42   ` Dave Hansen
2019-01-08  6:13     ` Pingfan Liu
2019-01-08  6:37       ` Juergen Gross
2019-01-08 17:32       ` Dave Hansen
2019-01-09  2:44         ` Pingfan Liu
2019-01-07 17:03 ` [RFC PATCH 0/4] x86_64/mm: remove bottom-up allocation style by pushing forward the parsing of mem hotplug info Dave Hansen
2019-01-08  5:49   ` Pingfan Liu
2019-01-08 10:05 ` Chao Fan
2019-01-08 13:27   ` Pingfan Liu

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1546849485-27933-2-git-send-email-kernelfans@gmail.com \
    --to=kernelfans@gmail.com \
    --cc=bp@alien8.de \
    --cc=dave.hansen@linux.intel.com \
    --cc=hpa@zytor.com \
    --cc=lenb@kernel.org \
    --cc=linux-acpi@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=luto@kernel.org \
    --cc=mingo@redhat.com \
    --cc=peterz@infradead.org \
    --cc=rjw@rjwysocki.net \
    --cc=tglx@linutronix.de \
    --cc=x86@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).