linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Jae Hyun Yoo <jae.hyun.yoo@linux.intel.com>
To: Lee Jones <lee.jones@linaro.org>,
	Rob Herring <robh+dt@kernel.org>,
	Jean Delvare <jdelvare@suse.com>,
	Guenter Roeck <linux@roeck-us.net>,
	Mark Rutland <mark.rutland@arm.com>,
	Joel Stanley <joel@jms.id.au>, Andrew Jeffery <andrew@aj.id.au>,
	Jonathan Corbet <corbet@lwn.net>,
	Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
	Gustavo Pimentel <gustavo.pimentel@synopsys.com>,
	Kishon Vijay Abraham I <kishon@ti.com>,
	Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>,
	"Darrick J . Wong" <darrick.wong@oracle.com>,
	Eric Sandeen <sandeen@redhat.com>, Arnd Bergmann <arnd@arndb.de>,
	Wu Hao <hao.wu@intel.com>,
	Tomohiro Kusumi <kusumi.tomohiro@gmail.com>,
	"Bryant G . Ly" <bryantly@linux.vnet.ibm.com>,
	Frederic Barrat <fbarrat@linux.vnet.ibm.com>,
	"David S . Miller" <davem@davemloft.net>,
	Mauro Carvalho Chehab <mchehab+samsung@kernel.org>,
	Andrew Morton <akpm@linux-foundation.org>,
	Randy Dunlap <rdunlap@infradead.org>,
	Philippe Ombredanne <pombredanne@nexb.com>,
	Vinod Koul <vkoul@kernel.org>,
	Stephen Boyd <sboyd@codeaurora.org>,
	David Kershner <david.kershner@unisys.com>,
	Uwe Kleine-Konig <u.kleine-koenig@pengutronix.de>,
	Sagar Dharia <sdharia@codeaurora.org>,
	Johan Hovold <johan@kernel.org>,
	Thomas Gleixner <tglx@linutronix.de>,
	Juergen Gross <jgross@suse.com>,
	Cyrille Pitchen <cyrille.pitchen@wedev4u.fr>
Cc: linux-hwmon@vger.kernel.org, devicetree@vger.kernel.org,
	linux-kernel@vger.kernel.org, linux-doc@vger.kernel.org,
	openbmc@lists.ozlabs.org,
	Jae Hyun Yoo <jae.hyun.yoo@linux.intel.com>,
	James Feist <james.feist@linux.intel.com>,
	Jason M Biils <jason.m.bills@linux.intel.com>,
	Vernon Mauery <vernon.mauery@linux.intel.com>
Subject: [PATCH v10 08/12] mfd: intel-peci-client: Add PECI client driver
Date: Mon,  7 Jan 2019 13:41:32 -0800	[thread overview]
Message-ID: <20190107214136.5256-9-jae.hyun.yoo@linux.intel.com> (raw)
In-Reply-To: <20190107214136.5256-1-jae.hyun.yoo@linux.intel.com>

This commit adds PECI client driver.

Cc: Lee Jones <lee.jones@linaro.org>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Andrew Jeffery <andrew@aj.id.au>
Cc: James Feist <james.feist@linux.intel.com>
Cc: Jason M Biils <jason.m.bills@linux.intel.com>
Cc: Joel Stanley <joel@jms.id.au>
Cc: Vernon Mauery <vernon.mauery@linux.intel.com>
Signed-off-by: Jae Hyun Yoo <jae.hyun.yoo@linux.intel.com>
---
 drivers/mfd/Kconfig                   |  14 +++
 drivers/mfd/Makefile                  |   1 +
 drivers/mfd/intel-peci-client.c       | 143 ++++++++++++++++++++++++++
 include/linux/mfd/intel-peci-client.h | 108 +++++++++++++++++++
 4 files changed, 266 insertions(+)
 create mode 100644 drivers/mfd/intel-peci-client.c
 create mode 100644 include/linux/mfd/intel-peci-client.h

diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
index 8c5dfdce4326..d021aa8dfa99 100644
--- a/drivers/mfd/Kconfig
+++ b/drivers/mfd/Kconfig
@@ -604,6 +604,20 @@ config MFD_INTEL_MSIC
 	  Passage) chip. This chip embeds audio, battery, GPIO, etc.
 	  devices used in Intel Medfield platforms.
 
+config MFD_INTEL_PECI_CLIENT
+	bool "Intel PECI client"
+	depends on (PECI || COMPILE_TEST)
+	select MFD_CORE
+	help
+	  If you say yes to this option, support will be included for the
+	  Intel PECI (Platform Environment Control Interface) client. PECI is a
+	  one-wire bus interface that provides a communication channel from PECI
+	  clients in Intel processors and chipset components to external
+	  monitoring or control devices.
+
+	  Additional drivers must be enabled in order to use the functionality
+	  of the device.
+
 config MFD_IPAQ_MICRO
 	bool "Atmel Micro ASIC (iPAQ h3100/h3600/h3700) Support"
 	depends on SA1100_H3100 || SA1100_H3600
diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile
index 12980a4ad460..b8c1da8e748b 100644
--- a/drivers/mfd/Makefile
+++ b/drivers/mfd/Makefile
@@ -204,6 +204,7 @@ obj-$(CONFIG_MFD_INTEL_LPSS)	+= intel-lpss.o
 obj-$(CONFIG_MFD_INTEL_LPSS_PCI)	+= intel-lpss-pci.o
 obj-$(CONFIG_MFD_INTEL_LPSS_ACPI)	+= intel-lpss-acpi.o
 obj-$(CONFIG_MFD_INTEL_MSIC)	+= intel_msic.o
+obj-$(CONFIG_MFD_INTEL_PECI_CLIENT)	+= intel-peci-client.o
 obj-$(CONFIG_MFD_PALMAS)	+= palmas.o
 obj-$(CONFIG_MFD_VIPERBOARD)    += viperboard.o
 obj-$(CONFIG_MFD_RC5T583)	+= rc5t583.o rc5t583-irq.o
diff --git a/drivers/mfd/intel-peci-client.c b/drivers/mfd/intel-peci-client.c
new file mode 100644
index 000000000000..d62442438512
--- /dev/null
+++ b/drivers/mfd/intel-peci-client.c
@@ -0,0 +1,143 @@
+// SPDX-License-Identifier: GPL-2.0
+// Copyright (c) 2018-2019 Intel Corporation
+
+#include <linux/bitfield.h>
+#include <linux/mfd/core.h>
+#include <linux/mfd/intel-peci-client.h>
+#include <linux/module.h>
+#include <linux/of_device.h>
+#include <linux/peci.h>
+
+#define CPU_ID_MODEL_MASK      GENMASK(7, 4)
+#define CPU_ID_FAMILY_MASK     GENMASK(11, 8)
+#define CPU_ID_EXT_MODEL_MASK  GENMASK(19, 16)
+#define CPU_ID_EXT_FAMILY_MASK GENMASK(27, 20)
+
+#define LOWER_NIBBLE_MASK      GENMASK(3, 0)
+#define UPPER_NIBBLE_MASK      GENMASK(7, 4)
+#define LOWER_BYTE_MASK        GENMASK(7, 0)
+#define UPPER_BYTE_MASK        GENMASK(16, 8)
+
+static struct mfd_cell peci_functions[] = {
+	{ .name = "peci-cputemp", },
+	{ .name = "peci-dimmtemp", },
+	/* TODO: Add additional PECI sideband functions into here */
+};
+
+static const struct cpu_gen_info cpu_gen_info_table[] = {
+	{ /* Haswell Xeon */
+		.family        = 6, /* Family code */
+		.model         = INTEL_FAM6_HASWELL_X,
+		.core_max      = CORE_MAX_ON_HSX,
+		.chan_rank_max = CHAN_RANK_MAX_ON_HSX,
+		.dimm_idx_max  = DIMM_IDX_MAX_ON_HSX },
+	{ /* Broadwell Xeon */
+		.family        = 6, /* Family code */
+		.model         = INTEL_FAM6_BROADWELL_X,
+		.core_max      = CORE_MAX_ON_BDX,
+		.chan_rank_max = CHAN_RANK_MAX_ON_BDX,
+		.dimm_idx_max  = DIMM_IDX_MAX_ON_BDX },
+	{ /* Skylake Xeon */
+		.family        = 6, /* Family code */
+		.model         = INTEL_FAM6_SKYLAKE_X,
+		.core_max      = CORE_MAX_ON_SKX,
+		.chan_rank_max = CHAN_RANK_MAX_ON_SKX,
+		.dimm_idx_max  = DIMM_IDX_MAX_ON_SKX },
+};
+
+static int peci_client_get_cpu_gen_info(struct peci_client_manager *priv)
+{
+	struct device *dev = &priv->client->dev;
+	u32 cpu_id;
+	u16 family;
+	u8 model;
+	int ret;
+	int i;
+
+	ret = peci_get_cpu_id(priv->client->adapter, priv->client->addr,
+			      &cpu_id);
+	if (ret)
+		return ret;
+
+	family = FIELD_PREP(LOWER_BYTE_MASK,
+			    FIELD_GET(CPU_ID_FAMILY_MASK, cpu_id)) |
+		 FIELD_PREP(UPPER_BYTE_MASK,
+			    FIELD_GET(CPU_ID_EXT_FAMILY_MASK, cpu_id));
+	model = FIELD_PREP(LOWER_NIBBLE_MASK,
+			   FIELD_GET(CPU_ID_MODEL_MASK, cpu_id)) |
+		FIELD_PREP(UPPER_NIBBLE_MASK,
+			   FIELD_GET(CPU_ID_EXT_MODEL_MASK, cpu_id));
+
+	for (i = 0; i < ARRAY_SIZE(cpu_gen_info_table); i++) {
+		const struct cpu_gen_info *cpu_info = &cpu_gen_info_table[i];
+
+		if (family == cpu_info->family && model == cpu_info->model) {
+			priv->gen_info = cpu_info;
+			break;
+		}
+	}
+
+	if (!priv->gen_info) {
+		dev_err(dev, "Can't support this CPU: 0x%x\n", cpu_id);
+		ret = -ENODEV;
+	}
+
+	return ret;
+}
+
+static int peci_client_probe(struct peci_client *client)
+{
+	struct device *dev = &client->dev;
+	struct peci_client_manager *priv;
+	uint cpu_no;
+	int ret;
+
+	priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
+	if (!priv)
+		return -ENOMEM;
+
+	dev_set_drvdata(dev, priv);
+	priv->client = client;
+	cpu_no = client->addr - PECI_BASE_ADDR;
+
+	ret = peci_client_get_cpu_gen_info(priv);
+	if (ret)
+		return ret;
+
+	ret = devm_mfd_add_devices(dev, cpu_no, peci_functions,
+				   ARRAY_SIZE(peci_functions), NULL, 0, NULL);
+	if (ret < 0) {
+		dev_err(dev, "Failed to register child devices: %d\n", ret);
+		return ret;
+	}
+
+	return 0;
+}
+
+#if IS_ENABLED(CONFIG_OF)
+static const struct of_device_id peci_client_of_table[] = {
+	{ .compatible = "intel,peci-client" },
+	{ }
+};
+MODULE_DEVICE_TABLE(of, peci_client_of_table);
+#endif /* CONFIG_OF */
+
+static const struct peci_device_id peci_client_ids[] = {
+	{ .name = "peci-client" },
+	{ }
+};
+MODULE_DEVICE_TABLE(peci, peci_client_ids);
+
+static struct peci_driver peci_client_driver = {
+	.probe    = peci_client_probe,
+	.id_table = peci_client_ids,
+	.driver   = {
+		.name           = "peci-client",
+		.of_match_table = of_match_ptr(peci_client_of_table),
+	},
+};
+module_peci_driver(peci_client_driver);
+
+MODULE_AUTHOR("Jae Hyun Yoo <jae.hyun.yoo@linux.intel.com>");
+MODULE_DESCRIPTION("PECI client driver");
+MODULE_LICENSE("GPL v2");
diff --git a/include/linux/mfd/intel-peci-client.h b/include/linux/mfd/intel-peci-client.h
new file mode 100644
index 000000000000..dd5eb36cca75
--- /dev/null
+++ b/include/linux/mfd/intel-peci-client.h
@@ -0,0 +1,108 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/* Copyright (c) 2018-2019 Intel Corporation */
+
+#ifndef __LINUX_MFD_INTEL_PECI_CLIENT_H
+#define __LINUX_MFD_INTEL_PECI_CLIENT_H
+
+#include <linux/peci.h>
+
+#if IS_ENABLED(CONFIG_X86)
+#include <asm/intel-family.h>
+#else
+/**
+ * Architectures other than x86 cannot include the header file so define these
+ * at here. These are needed for detecting type of client x86 CPUs behind a PECI
+ * connection.
+ */
+#define INTEL_FAM6_HASWELL_X   0x3F
+#define INTEL_FAM6_BROADWELL_X 0x4F
+#define INTEL_FAM6_SKYLAKE_X   0x55
+#endif
+
+#define CORE_MAX_ON_HSX        18 /* Max number of cores on Haswell */
+#define CHAN_RANK_MAX_ON_HSX   8  /* Max number of channel ranks on Haswell */
+#define DIMM_IDX_MAX_ON_HSX    3  /* Max DIMM index per channel on Haswell */
+
+#define CORE_MAX_ON_BDX        24 /* Max number of cores on Broadwell */
+#define CHAN_RANK_MAX_ON_BDX   4  /* Max number of channel ranks on Broadwell */
+#define DIMM_IDX_MAX_ON_BDX    3  /* Max DIMM index per channel on Broadwell */
+
+#define CORE_MAX_ON_SKX        28 /* Max number of cores on Skylake */
+#define CHAN_RANK_MAX_ON_SKX   6  /* Max number of channel ranks on Skylake */
+#define DIMM_IDX_MAX_ON_SKX    2  /* Max DIMM index per channel on Skylake */
+
+#define CORE_NUMS_MAX          CORE_MAX_ON_SKX
+#define CHAN_RANK_MAX          CHAN_RANK_MAX_ON_HSX
+#define DIMM_IDX_MAX           DIMM_IDX_MAX_ON_HSX
+#define DIMM_NUMS_MAX          (CHAN_RANK_MAX * DIMM_IDX_MAX)
+
+/**
+ * struct cpu_gen_info - CPU generation specific information
+ * @family: CPU family ID
+ * @model: CPU model
+ * @core_max: max number of cores
+ * @chan_rank_max: max number of channel ranks
+ * @dimm_idx_max: max number of DIMM indices
+ *
+ * CPU generation specific information to identify maximum number of cores and
+ * DIMM slots.
+ */
+struct cpu_gen_info {
+	u16  family;
+	u8   model;
+	uint core_max;
+	uint chan_rank_max;
+	uint dimm_idx_max;
+};
+
+/**
+ * struct peci_client_manager - PECI client manager information
+ * @client; pointer to the PECI client
+ * @name: PECI client manager name
+ * @gen_info: CPU generation info of the detected CPU
+ *
+ * PECI client manager information for managing PECI sideband functions on a CPU
+ * client.
+ */
+struct peci_client_manager {
+	struct peci_client *client;
+	char name[PECI_NAME_SIZE];
+	const struct cpu_gen_info *gen_info;
+};
+
+/**
+ * peci_client_read_package_config - read from the Package Configuration Space
+ * @priv: driver private data structure
+ * @index: encoding index for the requested service
+ * @param: parameter to specify the exact data being requested
+ * @data: data buffer to store the result
+ * Context: can sleep
+ *
+ * A generic PECI command that provides read access to the
+ * "Package Configuration Space" that is maintained by the PCU, including
+ * various power and thermal management functions. Typical PCS read services
+ * supported by the processor may include access to temperature data, energy
+ * status, run time information, DIMM temperatures and so on.
+ *
+ * Return: zero on success, else a negative error code.
+ */
+static inline int
+peci_client_read_package_config(struct peci_client_manager *priv,
+				u8 index, u16 param, u8 *data)
+{
+	struct peci_rd_pkg_cfg_msg msg;
+	int rc;
+
+	msg.addr = priv->client->addr;
+	msg.index = index;
+	msg.param = param;
+	msg.rx_len = 4;
+
+	rc = peci_command(priv->client->adapter, PECI_CMD_RD_PKG_CFG, &msg);
+	if (!rc)
+		memcpy(data, msg.pkg_config, 4);
+
+	return rc;
+}
+
+#endif /* __LINUX_MFD_INTEL_PECI_CLIENT_H */
-- 
2.20.1


  parent reply	other threads:[~2019-01-07 21:41 UTC|newest]

Thread overview: 27+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-01-07 21:41 [PATCH v10 00/12] PECI device driver introduction Jae Hyun Yoo
2019-01-07 21:41 ` [PATCH v10 01/12] dt-bindings: Add a document of PECI subsystem Jae Hyun Yoo
2019-01-14  5:34   ` Joel Stanley
2019-01-07 21:41 ` [PATCH v10 02/12] Documentation: ioctl: Add ioctl numbers for " Jae Hyun Yoo
2019-01-07 21:41 ` [PATCH v10 03/12] peci: Add support for PECI bus driver core Jae Hyun Yoo
2019-01-14 11:13   ` Joel Stanley
2019-01-14 22:38     ` Jae Hyun Yoo
2019-01-07 21:41 ` [PATCH v10 04/12] dt-bindings: Add a document of PECI adapter driver for ASPEED AST24xx/25xx SoCs Jae Hyun Yoo
2019-01-07 21:41 ` [PATCH v10 05/12] ARM: dts: aspeed: peci: Add PECI node Jae Hyun Yoo
2019-01-14  5:45   ` Joel Stanley
2019-01-14 22:12     ` Jae Hyun Yoo
2019-01-07 21:41 ` [PATCH v10 06/12] peci: Add a PECI adapter driver for Aspeed AST24xx/AST25xx Jae Hyun Yoo
2019-01-14 11:37   ` Joel Stanley
2019-01-14 22:49     ` Jae Hyun Yoo
2019-01-15 23:14       ` Joel Stanley
2019-01-15 23:36         ` Jae Hyun Yoo
2019-01-07 21:41 ` [PATCH v10 07/12] dt-bindings: mfd: Add a document for PECI client driver Jae Hyun Yoo
2019-01-14 11:39   ` Joel Stanley
2019-01-07 21:41 ` Jae Hyun Yoo [this message]
2019-01-14 11:42   ` [PATCH v10 08/12] mfd: intel-peci-client: Add " Joel Stanley
2019-01-14 23:03     ` Jae Hyun Yoo
2019-01-07 21:41 ` [PATCH v10 09/12] Documentation: hwmon: Add documents for PECI hwmon client drivers Jae Hyun Yoo
2019-01-14 11:43   ` Joel Stanley
2019-01-14 22:54     ` Jae Hyun Yoo
2019-01-07 21:41 ` [PATCH v10 10/12] hwmon: Add PECI cputemp driver Jae Hyun Yoo
2019-01-07 21:41 ` [PATCH v10 11/12] hwmon: Add PECI dimmtemp driver Jae Hyun Yoo
2019-01-07 21:41 ` [PATCH v10 12/12] Add maintainers for the PECI subsystem Jae Hyun Yoo

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20190107214136.5256-9-jae.hyun.yoo@linux.intel.com \
    --to=jae.hyun.yoo@linux.intel.com \
    --cc=akpm@linux-foundation.org \
    --cc=andrew@aj.id.au \
    --cc=arnd@arndb.de \
    --cc=bryantly@linux.vnet.ibm.com \
    --cc=corbet@lwn.net \
    --cc=cyrille.pitchen@wedev4u.fr \
    --cc=darrick.wong@oracle.com \
    --cc=davem@davemloft.net \
    --cc=david.kershner@unisys.com \
    --cc=devicetree@vger.kernel.org \
    --cc=fbarrat@linux.vnet.ibm.com \
    --cc=gregkh@linuxfoundation.org \
    --cc=gustavo.pimentel@synopsys.com \
    --cc=hao.wu@intel.com \
    --cc=james.feist@linux.intel.com \
    --cc=jason.m.bills@linux.intel.com \
    --cc=jdelvare@suse.com \
    --cc=jgross@suse.com \
    --cc=joel@jms.id.au \
    --cc=johan@kernel.org \
    --cc=kishon@ti.com \
    --cc=kusumi.tomohiro@gmail.com \
    --cc=lee.jones@linaro.org \
    --cc=linux-doc@vger.kernel.org \
    --cc=linux-hwmon@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux@roeck-us.net \
    --cc=lorenzo.pieralisi@arm.com \
    --cc=mark.rutland@arm.com \
    --cc=mchehab+samsung@kernel.org \
    --cc=openbmc@lists.ozlabs.org \
    --cc=pombredanne@nexb.com \
    --cc=rdunlap@infradead.org \
    --cc=robh+dt@kernel.org \
    --cc=sandeen@redhat.com \
    --cc=sboyd@codeaurora.org \
    --cc=sdharia@codeaurora.org \
    --cc=tglx@linutronix.de \
    --cc=u.kleine-koenig@pengutronix.de \
    --cc=vernon.mauery@linux.intel.com \
    --cc=vkoul@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).