From: Anand Moon <linux.amoon@gmail.com>
To: devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
linux-amlogic@lists.infradead.org, linux-kernel@vger.kernel.org
Cc: Rob Herring <robh+dt@kernel.org>,
Mark Rutland <mark.rutland@arm.com>,
Kevin Hilman <khilman@baylibre.com>,
Martin Blumenstingl <martin.blumenstingl@googlemail.com>,
Jerome Brunet <jbrunet@baylibre.com>,
Neil Armstrong <narmstrong@baylibre.com>
Subject: [PATCH] ARM64: dts: meson-gxbb-odroidc2: Fix usb phy regulator warning
Date: Fri, 11 Jan 2019 14:52:35 +0530 [thread overview]
Message-ID: <20190111092235.28161-1-linux.amoon@gmail.com> (raw)
Add missing vin-supply 5V regulator node on usb_phy nodes needed
to power usb bus ports. Override the dr_mode from "host" to "peripheral"
for initialization of dwc2 usb0 phy node,changes fix the below
warning for usb initialization.
[ 1.203900] phy phy-c0000000.phy.0: USB ID detect failed!
[ 1.208048] phy phy-c0000000.phy.0: phy poweron failed --> -22
[ 1.213877] WARNING: CPU: 1 PID: 44 at drivers/regulator/core.c:2054 _regulator_put.part.11+0xf0/0xf8
[ 1.222953] Modules linked in:
[ 1.225976] CPU: 1 PID: 44 Comm: kworker/1:1 Not tainted 5.0.0-rc1-xc2ml #3
[ 1.232872] Hardware name: Hardkernel ODROID-C2 (DT)
[ 1.237794] Workqueue: events deferred_probe_work_func
[ 1.242878] pstate: 80000005 (Nzcv daif -PAN -UAO)
[ 1.247623] pc : _regulator_put.part.11+0xf0/0xf8
[ 1.252280] lr : regulator_put+0x34/0x48
[ 1.256159] sp : ffff00001176bb00
[ 1.259437] x29: ffff00001176bb00 x28: 0000000000000000
[ 1.264698] x27: ffff80007f31beb8 x26: ffff000010eeb7e0
[ 1.269959] x25: 0000000000000000 x24: 0000000000000009
[ 1.275220] x23: ffff00001176bbc8 x22: ffff80007ed9d500
[ 1.280482] x21: ffff0000111bd6c8 x20: ffff80007ed9d700
[ 1.285743] x19: ffff80007ed9d700 x18: 000000000000006f
[ 1.291004] x17: 0000000000000000 x16: 0000000000000000
[ 1.296265] x15: 0000000000000400 x14: 0000000000000400
[ 1.301527] x13: ff00000000000000 x12: ffffffffffffffff
[ 1.306788] x11: 0000000000000038 x10: 0000000000000040
[ 1.312049] x9 : ffff0000111d58b0 x8 : ffff0000111d58a8
[ 1.317310] x7 : ffff80007ed9db00 x6 : ffff80007ec21b00
[ 1.322571] x5 : ffff80007f400248 x4 : ffff80007fba9b00
[ 1.327833] x3 : ffff0000112d9eb8 x2 : ffff80007ec21b00
[ 1.333094] x1 : 0000000000000000 x0 : 0000000000000001
[ 1.338356] Call trace:
[ 1.340773] _regulator_put.part.11+0xf0/0xf8
[ 1.345085] regulator_put+0x34/0x48
[ 1.348621] regulator_bulk_free+0x30/0x50
[ 1.352675] devm_regulator_bulk_release+0x18/0x20
[ 1.357421] release_nodes+0x1b0/0x220
[ 1.361127] devres_release_all+0x34/0x50
[ 1.365094] really_probe+0xec/0x290
[ 1.368630] driver_probe_device+0x54/0xe8
[ 1.372684] __device_attach_driver+0xb8/0xe8
[ 1.376997] bus_for_each_drv+0x78/0xc8
[ 1.380792] __device_attach+0xd4/0x130
[ 1.384587] device_initial_probe+0x10/0x18
[ 1.388727] bus_probe_device+0x90/0x98
[ 1.392522] deferred_probe_work_func+0x6c/0xa0
[ 1.397010] process_one_work+0x1e0/0x318
[ 1.400975] worker_thread+0x228/0x428
[ 1.404684] kthread+0x124/0x128
[ 1.407876] ret_from_fork+0x10/0x18
[ 1.411410] ---[ end trace de5fd1b262c1f56a ]---
[ 1.416055] WARNING: CPU: 1 PID: 44 at drivers/regulator/core.c:2054 _regulator_put.part.11+0xf0/0xf8
[ 1.425123] Modules linked in:
[ 1.428144] CPU: 1 PID: 44 Comm: kworker/1:1 Tainted: G W 5.0.0-rc1-xc2ml #3
[ 1.436422] Hardware name: Hardkernel ODROID-C2 (DT)
[ 1.441340] Workqueue: events deferred_probe_work_func
Fixes: 5a0803bd5ae (ARM64: dts: meson-gxbb-odroidc2: Enable USB Nodes)
Cc: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Cc: Jerome Brunet <jbrunet@baylibre.com>
Cc: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Anand Moon <linux.amoon@gmail.com>
---
Fix the following power issue with usb device
[ 795.380156] usb 1-1.2: reset high-speed USB device number 3 using dwc2
[ 798.356073] usb 1-1.2: reset high-speed USB device number 3 using dwc2
[ 801.331999] usb 1-1.2: reset high-speed USB device number 3 using dwc2
[ 804.307919] usb 1-1.2: reset high-speed USB device number 3 using dwc2
[ 807.283844] usb 1-1.2: reset high-speed USB device number 3 using dwc2
[alarm@archl-c2m ~]$ lsusb -t
/: Bus 01.Port 1: Dev 1, Class=root_hub, Driver=dwc2/1p, 480M
|__ Port 1: Dev 2, If 0, Class=Hub, Driver=hub/4p, 480M
|__ Port 1: Dev 4, If 0, Class=Mass Storage, Driver=usb-storage, 480M
|__ Port 2: Dev 5, If 3, Class=Audio, Driver=, 480M
|__ Port 2: Dev 5, If 1, Class=Video, Driver=uvcvideo, 480M
|__ Port 2: Dev 5, If 2, Class=Audio, Driver=, 480M
|__ Port 2: Dev 5, If 0, Class=Video, Driver=uvcvideo, 480M
|__ Port 3: Dev 3, If 0, Class=Vendor Specific Class, Driver=, 480M
Similar Fix is need for Odroid C1+ to power on the phy nodes
---
arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts | 10 ++++++++++
1 file changed, 10 insertions(+)
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts b/arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts
index 2e1cd5e3a246..b4e14ff614c4 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts
@@ -28,6 +28,13 @@
reg = <0x0 0x0 0x0 0x80000000>;
};
+ p5v0: regulator-p5v0 {
+ compatible = "regulator-fixed";
+ regulator-name = "P5V0";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ };
+
usb_otg_pwr: regulator-usb-pwrs {
compatible = "regulator-fixed";
@@ -36,6 +43,8 @@
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
+ vin-supply = <&p5v0>;
+
gpio = <&gpio_ao GPIOAO_5 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
@@ -303,6 +312,7 @@
&usb0 {
status = "okay";
+ dr_mode = "peripheral";
};
&usb1 {
--
2.19.1
next reply other threads:[~2019-01-11 9:22 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-01-11 9:22 Anand Moon [this message]
2019-01-11 13:40 ` [PATCH] ARM64: dts: meson-gxbb-odroidc2: Fix usb phy regulator warning Neil Armstrong
2019-01-11 16:16 ` Anand Moon
2019-01-11 18:51 ` Kevin Hilman
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190111092235.28161-1-linux.amoon@gmail.com \
--to=linux.amoon@gmail.com \
--cc=devicetree@vger.kernel.org \
--cc=jbrunet@baylibre.com \
--cc=khilman@baylibre.com \
--cc=linux-amlogic@lists.infradead.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mark.rutland@arm.com \
--cc=martin.blumenstingl@googlemail.com \
--cc=narmstrong@baylibre.com \
--cc=robh+dt@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).