[2/2] ARM: dts: meson8b: odroidc1: Fix usb phy regulator power failed warning
diff mbox series

Message ID 20190113181808.5768-2-linux.amoon@gmail.com
State In Next
Commit 8d8ca5af571ac680aa71b0851a595529ed82506d
Headers show
Series
  • [1/2] ARM: dts: meson8b: odroidc1: Enable usb phy node
Related show

Commit Message

Anand Moon Jan. 13, 2019, 6:18 p.m. UTC
Override the dr_mode from "host" to "peripheral" for dwc2
usb_phy0->usb0 initialization of OTG Micro-B type.
Changes fix the below warning for phy poweron failed --> -22

This fix the initialization of c9040000.usb phy.

[    1.639706] phy phy-c1108800.phy.0: USB ID detect failed!
[    1.643850] phy phy-c1108800.phy.0: phy poweron failed --> -22
[    1.649706] ------------[ cut here ]------------
[    1.654273] WARNING: CPU: 0 PID: 29 at drivers/regulator/core.c:2054 _regulator_put.part.8+0xf8/0xfc
[    1.663400] Modules linked in:
[    1.666439] CPU: 0 PID: 29 Comm: kworker/0:1 Not tainted 4.20.0-xc1ml #11
[    1.673192] Hardware name: Amlogic Meson platform
[    1.677894] Workqueue: events deferred_probe_work_func
[    1.683027] [<c0312204>] (unwind_backtrace) from [<c030cb8c>] (show_stack+0x10/0x14)
[    1.690746] [<c030cb8c>] (show_stack) from [<c0e223b8>] (dump_stack+0x8c/0xa0)
[    1.697953] [<c0e223b8>] (dump_stack) from [<c0346334>] (__warn.part.3+0xbc/0xd8)
[    1.705418] [<c0346334>] (__warn.part.3) from [<c03464b0>] (warn_slowpath_null+0x44/0x4c)
[    1.713579] [<c03464b0>] (warn_slowpath_null) from [<c07df6b8>] (_regulator_put.part.8+0xf8/0xfc)
[    1.722437] [<c07df6b8>] (_regulator_put.part.8) from [<c07df6e4>] (regulator_put+0x28/0x38)
[    1.730859] [<c07df6e4>] (regulator_put) from [<c07df71c>] (regulator_bulk_free+0x28/0x38)
[    1.739112] [<c07df71c>] (regulator_bulk_free) from [<c0943858>] (release_nodes+0x1bc/0x200)
[    1.747537] [<c0943858>] (release_nodes) from [<c093f82c>] (really_probe+0x110/0x2cc)
[    1.755350] [<c093f82c>] (really_probe) from [<c093fb4c>] (driver_probe_device+0x60/0x16c)
[    1.763599] [<c093fb4c>] (driver_probe_device) from [<c093dcd4>] (bus_for_each_drv+0x80/0xc4)
[    1.772110] [<c093dcd4>] (bus_for_each_drv) from [<c093f6ac>] (__device_attach+0xd0/0x138)
[    1.780359] [<c093f6ac>] (__device_attach) from [<c093eae4>] (bus_probe_device+0x84/0x8c)
[    1.788522] [<c093eae4>] (bus_probe_device) from [<c093ef80>] (deferred_probe_work_func+0x60/0x8c)
[    1.797470] [<c093ef80>] (deferred_probe_work_func) from [<c035fdb8>] (process_one_work+0x218/0x504)
[    1.806585] [<c035fdb8>] (process_one_work) from [<c0360ea8>] (worker_thread+0x2a8/0x5bc)
[    1.814748] [<c0360ea8>] (worker_thread) from [<c0365a18>] (kthread+0x14c/0x154)
[    1.822128] [<c0365a18>] (kthread) from [<c03010e8>] (ret_from_fork+0x14/0x2c)
[    1.829331] Exception stack(0xee0ebfb0 to 0xee0ebff8)
[    1.834369] bfa0:                                     00000000 00000000 00000000 00000000
[    1.842534] bfc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[    1.850695] bfe0: 00000000 00000000 00000000 00000000 00000013 00000000
[    1.857311] ---[ end trace e28bbc26874282a4 ]---
[    1.861984] ------------[ cut here ]------------
[    1.866524] WARNING: CPU: 0 PID: 29 at drivers/regulator/core.c:2054 _regulator_put.part.8+0xf8/0xfc
[    1.875629] Modules linked in:
[    1.878658] CPU: 0 PID: 29 Comm: kworker/0:1 Tainted: GW         4.20.0-xc1ml #11
[    1.886817] Hardware name: Amlogic Meson platform
[    1.891513] Workqueue: events deferred_probe_work_func
[    1.896641] [<c0312204>] (unwind_backtrace) from [<c030cb8c>] (show_stack+0x10/0x14)
[    1.904366] [<c030cb8c>] (show_stack) from [<c0e223b8>] (dump_stack+0x8c/0xa0)
[    1.911573] [<c0e223b8>] (dump_stack) from [<c0346334>] (__warn.part.3+0xbc/0xd8)
[    1.919041] [<c0346334>] (__warn.part.3) from [<c03464b0>] (warn_slowpath_null+0x44/0x4c)
[    1.927203] [<c03464b0>] (warn_slowpath_null) from [<c07df6b8>] (_regulator_put.part.8+0xf8/0xfc)
[    1.936060] [<c07df6b8>] (_regulator_put.part.8) from [<c07df6e4>] (regulator_put+0x28/0x38)
[    1.944483] [<c07df6e4>] (regulator_put) from [<c07df71c>] (regulator_bulk_free+0x28/0x38)
[    1.952734] [<c07df71c>] (regulator_bulk_free) from [<c0943858>] (release_nodes+0x1bc/0x200)
[    1.961159] [<c0943858>] (release_nodes) from [<c093f82c>] (really_probe+0x110/0x2cc)
[    1.968974] [<c093f82c>] (really_probe) from [<c093fb4c>] (driver_probe_device+0x60/0x16c)
[    1.977224] [<c093fb4c>] (driver_probe_device) from [<c093dcd4>] (bus_for_each_drv+0x80/0xc4)
[    1.985734] [<c093dcd4>] (bus_for_each_drv) from [<c093f6ac>] (__device_attach+0xd0/0x138)
[    1.993984] [<c093f6ac>] (__device_attach) from [<c093eae4>] (bus_probe_device+0x84/0x8c)
[    2.002147] [<c093eae4>] (bus_probe_device) from [<c093ef80>] (deferred_probe_work_func+0x60/0x8c)
[    2.011092] [<c093ef80>] (deferred_probe_work_func) from [<c035fdb8>] (process_one_work+0x218/0x504)
[    2.020209] [<c035fdb8>] (process_one_work) from [<c0360ea8>] (worker_thread+0x2a8/0x5bc)
[    2.028371] [<c0360ea8>] (worker_thread) from [<c0365a18>] (kthread+0x14c/0x154)
[    2.035752] [<c0365a18>] (kthread) from [<c03010e8>] (ret_from_fork+0x14/0x2c)
[    2.042955] Exception stack(0xee0ebfb0 to 0xee0ebff8)
[    2.047993] bfa0:                                     00000000 00000000 00000000 00000000
[    2.056158] bfc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[    2.064320] bfe0: 00000000 00000000 00000000 00000000 00000013 00000000
[    2.070934] ---[ end trace e28bbc26874282a5 ]---

Cc: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Cc: Jerome Brunet <jbrunet@baylibre.com>
Cc: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Anand Moon <linux.amoon@gmail.com>
---
Rebased on Kevin's amlogic/v5.0/fixes branch
Note the warning is not getting produced on the latest kernel.
---
 arch/arm/boot/dts/meson8b-odroidc1.dts | 1 +
 1 file changed, 1 insertion(+)

Comments

Martin Blumenstingl Jan. 18, 2019, 10:06 p.m. UTC | #1
Hi Anand,

On Sun, Jan 13, 2019 at 7:18 PM Anand Moon <linux.amoon@gmail.com> wrote:
>
> Override the dr_mode from "host" to "peripheral" for dwc2
> usb_phy0->usb0 initialization of OTG Micro-B type.
> Changes fix the below warning for phy poweron failed --> -22
>
> This fix the initialization of c9040000.usb phy.
>
> [    1.639706] phy phy-c1108800.phy.0: USB ID detect failed!
> [    1.643850] phy phy-c1108800.phy.0: phy poweron failed --> -22
> [    1.649706] ------------[ cut here ]------------
> [    1.654273] WARNING: CPU: 0 PID: 29 at drivers/regulator/core.c:2054 _regulator_put.part.8+0xf8/0xfc
> [    1.663400] Modules linked in:
> [    1.666439] CPU: 0 PID: 29 Comm: kworker/0:1 Not tainted 4.20.0-xc1ml #11
> [    1.673192] Hardware name: Amlogic Meson platform
> [    1.677894] Workqueue: events deferred_probe_work_func
> [    1.683027] [<c0312204>] (unwind_backtrace) from [<c030cb8c>] (show_stack+0x10/0x14)
> [    1.690746] [<c030cb8c>] (show_stack) from [<c0e223b8>] (dump_stack+0x8c/0xa0)
> [    1.697953] [<c0e223b8>] (dump_stack) from [<c0346334>] (__warn.part.3+0xbc/0xd8)
> [    1.705418] [<c0346334>] (__warn.part.3) from [<c03464b0>] (warn_slowpath_null+0x44/0x4c)
> [    1.713579] [<c03464b0>] (warn_slowpath_null) from [<c07df6b8>] (_regulator_put.part.8+0xf8/0xfc)
> [    1.722437] [<c07df6b8>] (_regulator_put.part.8) from [<c07df6e4>] (regulator_put+0x28/0x38)
> [    1.730859] [<c07df6e4>] (regulator_put) from [<c07df71c>] (regulator_bulk_free+0x28/0x38)
> [    1.739112] [<c07df71c>] (regulator_bulk_free) from [<c0943858>] (release_nodes+0x1bc/0x200)
> [    1.747537] [<c0943858>] (release_nodes) from [<c093f82c>] (really_probe+0x110/0x2cc)
> [    1.755350] [<c093f82c>] (really_probe) from [<c093fb4c>] (driver_probe_device+0x60/0x16c)
> [    1.763599] [<c093fb4c>] (driver_probe_device) from [<c093dcd4>] (bus_for_each_drv+0x80/0xc4)
> [    1.772110] [<c093dcd4>] (bus_for_each_drv) from [<c093f6ac>] (__device_attach+0xd0/0x138)
> [    1.780359] [<c093f6ac>] (__device_attach) from [<c093eae4>] (bus_probe_device+0x84/0x8c)
> [    1.788522] [<c093eae4>] (bus_probe_device) from [<c093ef80>] (deferred_probe_work_func+0x60/0x8c)
> [    1.797470] [<c093ef80>] (deferred_probe_work_func) from [<c035fdb8>] (process_one_work+0x218/0x504)
> [    1.806585] [<c035fdb8>] (process_one_work) from [<c0360ea8>] (worker_thread+0x2a8/0x5bc)
> [    1.814748] [<c0360ea8>] (worker_thread) from [<c0365a18>] (kthread+0x14c/0x154)
> [    1.822128] [<c0365a18>] (kthread) from [<c03010e8>] (ret_from_fork+0x14/0x2c)
> [    1.829331] Exception stack(0xee0ebfb0 to 0xee0ebff8)
> [    1.834369] bfa0:                                     00000000 00000000 00000000 00000000
> [    1.842534] bfc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
> [    1.850695] bfe0: 00000000 00000000 00000000 00000000 00000013 00000000
> [    1.857311] ---[ end trace e28bbc26874282a4 ]---
> [    1.861984] ------------[ cut here ]------------
> [    1.866524] WARNING: CPU: 0 PID: 29 at drivers/regulator/core.c:2054 _regulator_put.part.8+0xf8/0xfc
> [    1.875629] Modules linked in:
> [    1.878658] CPU: 0 PID: 29 Comm: kworker/0:1 Tainted: GW         4.20.0-xc1ml #11
> [    1.886817] Hardware name: Amlogic Meson platform
> [    1.891513] Workqueue: events deferred_probe_work_func
> [    1.896641] [<c0312204>] (unwind_backtrace) from [<c030cb8c>] (show_stack+0x10/0x14)
> [    1.904366] [<c030cb8c>] (show_stack) from [<c0e223b8>] (dump_stack+0x8c/0xa0)
> [    1.911573] [<c0e223b8>] (dump_stack) from [<c0346334>] (__warn.part.3+0xbc/0xd8)
> [    1.919041] [<c0346334>] (__warn.part.3) from [<c03464b0>] (warn_slowpath_null+0x44/0x4c)
> [    1.927203] [<c03464b0>] (warn_slowpath_null) from [<c07df6b8>] (_regulator_put.part.8+0xf8/0xfc)
> [    1.936060] [<c07df6b8>] (_regulator_put.part.8) from [<c07df6e4>] (regulator_put+0x28/0x38)
> [    1.944483] [<c07df6e4>] (regulator_put) from [<c07df71c>] (regulator_bulk_free+0x28/0x38)
> [    1.952734] [<c07df71c>] (regulator_bulk_free) from [<c0943858>] (release_nodes+0x1bc/0x200)
> [    1.961159] [<c0943858>] (release_nodes) from [<c093f82c>] (really_probe+0x110/0x2cc)
> [    1.968974] [<c093f82c>] (really_probe) from [<c093fb4c>] (driver_probe_device+0x60/0x16c)
> [    1.977224] [<c093fb4c>] (driver_probe_device) from [<c093dcd4>] (bus_for_each_drv+0x80/0xc4)
> [    1.985734] [<c093dcd4>] (bus_for_each_drv) from [<c093f6ac>] (__device_attach+0xd0/0x138)
> [    1.993984] [<c093f6ac>] (__device_attach) from [<c093eae4>] (bus_probe_device+0x84/0x8c)
> [    2.002147] [<c093eae4>] (bus_probe_device) from [<c093ef80>] (deferred_probe_work_func+0x60/0x8c)
> [    2.011092] [<c093ef80>] (deferred_probe_work_func) from [<c035fdb8>] (process_one_work+0x218/0x504)
> [    2.020209] [<c035fdb8>] (process_one_work) from [<c0360ea8>] (worker_thread+0x2a8/0x5bc)
> [    2.028371] [<c0360ea8>] (worker_thread) from [<c0365a18>] (kthread+0x14c/0x154)
> [    2.035752] [<c0365a18>] (kthread) from [<c03010e8>] (ret_from_fork+0x14/0x2c)
> [    2.042955] Exception stack(0xee0ebfb0 to 0xee0ebff8)
> [    2.047993] bfa0:                                     00000000 00000000 00000000 00000000
> [    2.056158] bfc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
> [    2.064320] bfe0: 00000000 00000000 00000000 00000000 00000013 00000000
> [    2.070934] ---[ end trace e28bbc26874282a5 ]---
>
> Cc: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
> Cc: Jerome Brunet <jbrunet@baylibre.com>
> Cc: Neil Armstrong <narmstrong@baylibre.com>
> Signed-off-by: Anand Moon <linux.amoon@gmail.com>
> ---
> Rebased on Kevin's amlogic/v5.0/fixes branch
> Note the warning is not getting produced on the latest kernel.
> ---
>  arch/arm/boot/dts/meson8b-odroidc1.dts | 1 +
>  1 file changed, 1 insertion(+)
>
> diff --git a/arch/arm/boot/dts/meson8b-odroidc1.dts b/arch/arm/boot/dts/meson8b-odroidc1.dts
> index a49a8509b288..9d7f725cfe35 100644
> --- a/arch/arm/boot/dts/meson8b-odroidc1.dts
> +++ b/arch/arm/boot/dts/meson8b-odroidc1.dts
> @@ -318,6 +318,7 @@
>
>  &usb0 {
>         status = "okay";
> +       dr_mode = "peripheral";
>  };
with this change I get the following message during boot:
  dwc2 c9040000.usb: Configuration mismatch. dr_mode forced to host

as far as I understand your original problem is the following error
from the USB2 PHY driver:
  phy phy-c1108800.phy.0: USB ID detect failed!
  phy phy-c1108800.phy.0: phy poweron failed --> -22
maybe we should fix that instead?


Regards
Martin
Anand Moon Jan. 20, 2019, 6:46 p.m. UTC | #2
Hi Martin,

On Sat, 19 Jan 2019 at 03:36, Martin Blumenstingl
<martin.blumenstingl@googlemail.com> wrote:
>
> Hi Anand,
>
> On Sun, Jan 13, 2019 at 7:18 PM Anand Moon <linux.amoon@gmail.com> wrote:
> >
> > Override the dr_mode from "host" to "peripheral" for dwc2
> > usb_phy0->usb0 initialization of OTG Micro-B type.
> > Changes fix the below warning for phy poweron failed --> -22
> >
> > This fix the initialization of c9040000.usb phy.
> >
> > [    1.639706] phy phy-c1108800.phy.0: USB ID detect failed!
> > [    1.643850] phy phy-c1108800.phy.0: phy poweron failed --> -22
> > [    1.649706] ------------[ cut here ]------------
> > [    1.654273] WARNING: CPU: 0 PID: 29 at drivers/regulator/core.c:2054 _regulator_put.part.8+0xf8/0xfc
> > [    1.663400] Modules linked in:
> > [    1.666439] CPU: 0 PID: 29 Comm: kworker/0:1 Not tainted 4.20.0-xc1ml #11
> > [    1.673192] Hardware name: Amlogic Meson platform
> > [    1.677894] Workqueue: events deferred_probe_work_func
> > [    1.683027] [<c0312204>] (unwind_backtrace) from [<c030cb8c>] (show_stack+0x10/0x14)
> > [    1.690746] [<c030cb8c>] (show_stack) from [<c0e223b8>] (dump_stack+0x8c/0xa0)
> > [    1.697953] [<c0e223b8>] (dump_stack) from [<c0346334>] (__warn.part.3+0xbc/0xd8)
> > [    1.705418] [<c0346334>] (__warn.part.3) from [<c03464b0>] (warn_slowpath_null+0x44/0x4c)
> > [    1.713579] [<c03464b0>] (warn_slowpath_null) from [<c07df6b8>] (_regulator_put.part.8+0xf8/0xfc)
> > [    1.722437] [<c07df6b8>] (_regulator_put.part.8) from [<c07df6e4>] (regulator_put+0x28/0x38)
> > [    1.730859] [<c07df6e4>] (regulator_put) from [<c07df71c>] (regulator_bulk_free+0x28/0x38)
> > [    1.739112] [<c07df71c>] (regulator_bulk_free) from [<c0943858>] (release_nodes+0x1bc/0x200)
> > [    1.747537] [<c0943858>] (release_nodes) from [<c093f82c>] (really_probe+0x110/0x2cc)
> > [    1.755350] [<c093f82c>] (really_probe) from [<c093fb4c>] (driver_probe_device+0x60/0x16c)
> > [    1.763599] [<c093fb4c>] (driver_probe_device) from [<c093dcd4>] (bus_for_each_drv+0x80/0xc4)
> > [    1.772110] [<c093dcd4>] (bus_for_each_drv) from [<c093f6ac>] (__device_attach+0xd0/0x138)
> > [    1.780359] [<c093f6ac>] (__device_attach) from [<c093eae4>] (bus_probe_device+0x84/0x8c)
> > [    1.788522] [<c093eae4>] (bus_probe_device) from [<c093ef80>] (deferred_probe_work_func+0x60/0x8c)
> > [    1.797470] [<c093ef80>] (deferred_probe_work_func) from [<c035fdb8>] (process_one_work+0x218/0x504)
> > [    1.806585] [<c035fdb8>] (process_one_work) from [<c0360ea8>] (worker_thread+0x2a8/0x5bc)
> > [    1.814748] [<c0360ea8>] (worker_thread) from [<c0365a18>] (kthread+0x14c/0x154)
> > [    1.822128] [<c0365a18>] (kthread) from [<c03010e8>] (ret_from_fork+0x14/0x2c)
> > [    1.829331] Exception stack(0xee0ebfb0 to 0xee0ebff8)
> > [    1.834369] bfa0:                                     00000000 00000000 00000000 00000000
> > [    1.842534] bfc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
> > [    1.850695] bfe0: 00000000 00000000 00000000 00000000 00000013 00000000
> > [    1.857311] ---[ end trace e28bbc26874282a4 ]---
> > [    1.861984] ------------[ cut here ]------------
> > [    1.866524] WARNING: CPU: 0 PID: 29 at drivers/regulator/core.c:2054 _regulator_put.part.8+0xf8/0xfc
> > [    1.875629] Modules linked in:
> > [    1.878658] CPU: 0 PID: 29 Comm: kworker/0:1 Tainted: GW         4.20.0-xc1ml #11
> > [    1.886817] Hardware name: Amlogic Meson platform
> > [    1.891513] Workqueue: events deferred_probe_work_func
> > [    1.896641] [<c0312204>] (unwind_backtrace) from [<c030cb8c>] (show_stack+0x10/0x14)
> > [    1.904366] [<c030cb8c>] (show_stack) from [<c0e223b8>] (dump_stack+0x8c/0xa0)
> > [    1.911573] [<c0e223b8>] (dump_stack) from [<c0346334>] (__warn.part.3+0xbc/0xd8)
> > [    1.919041] [<c0346334>] (__warn.part.3) from [<c03464b0>] (warn_slowpath_null+0x44/0x4c)
> > [    1.927203] [<c03464b0>] (warn_slowpath_null) from [<c07df6b8>] (_regulator_put.part.8+0xf8/0xfc)
> > [    1.936060] [<c07df6b8>] (_regulator_put.part.8) from [<c07df6e4>] (regulator_put+0x28/0x38)
> > [    1.944483] [<c07df6e4>] (regulator_put) from [<c07df71c>] (regulator_bulk_free+0x28/0x38)
> > [    1.952734] [<c07df71c>] (regulator_bulk_free) from [<c0943858>] (release_nodes+0x1bc/0x200)
> > [    1.961159] [<c0943858>] (release_nodes) from [<c093f82c>] (really_probe+0x110/0x2cc)
> > [    1.968974] [<c093f82c>] (really_probe) from [<c093fb4c>] (driver_probe_device+0x60/0x16c)
> > [    1.977224] [<c093fb4c>] (driver_probe_device) from [<c093dcd4>] (bus_for_each_drv+0x80/0xc4)
> > [    1.985734] [<c093dcd4>] (bus_for_each_drv) from [<c093f6ac>] (__device_attach+0xd0/0x138)
> > [    1.993984] [<c093f6ac>] (__device_attach) from [<c093eae4>] (bus_probe_device+0x84/0x8c)
> > [    2.002147] [<c093eae4>] (bus_probe_device) from [<c093ef80>] (deferred_probe_work_func+0x60/0x8c)
> > [    2.011092] [<c093ef80>] (deferred_probe_work_func) from [<c035fdb8>] (process_one_work+0x218/0x504)
> > [    2.020209] [<c035fdb8>] (process_one_work) from [<c0360ea8>] (worker_thread+0x2a8/0x5bc)
> > [    2.028371] [<c0360ea8>] (worker_thread) from [<c0365a18>] (kthread+0x14c/0x154)
> > [    2.035752] [<c0365a18>] (kthread) from [<c03010e8>] (ret_from_fork+0x14/0x2c)
> > [    2.042955] Exception stack(0xee0ebfb0 to 0xee0ebff8)
> > [    2.047993] bfa0:                                     00000000 00000000 00000000 00000000
> > [    2.056158] bfc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
> > [    2.064320] bfe0: 00000000 00000000 00000000 00000000 00000013 00000000
> > [    2.070934] ---[ end trace e28bbc26874282a5 ]---
> >
> > Cc: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
> > Cc: Jerome Brunet <jbrunet@baylibre.com>
> > Cc: Neil Armstrong <narmstrong@baylibre.com>
> > Signed-off-by: Anand Moon <linux.amoon@gmail.com>
> > ---
> > Rebased on Kevin's amlogic/v5.0/fixes branch
> > Note the warning is not getting produced on the latest kernel.
> > ---
> >  arch/arm/boot/dts/meson8b-odroidc1.dts | 1 +
> >  1 file changed, 1 insertion(+)
> >
> > diff --git a/arch/arm/boot/dts/meson8b-odroidc1.dts b/arch/arm/boot/dts/meson8b-odroidc1.dts
> > index a49a8509b288..9d7f725cfe35 100644
> > --- a/arch/arm/boot/dts/meson8b-odroidc1.dts
> > +++ b/arch/arm/boot/dts/meson8b-odroidc1.dts
> > @@ -318,6 +318,7 @@
> >
> >  &usb0 {
> >         status = "okay";
> > +       dr_mode = "peripheral";
> >  };
> with this change I get the following message during boot:
>   dwc2 c9040000.usb: Configuration mismatch. dr_mode forced to host
>
> as far as I understand your original problem is the following error
> from the USB2 PHY driver:
>   phy phy-c1108800.phy.0: USB ID detect failed!
>   phy phy-c1108800.phy.0: phy poweron failed --> -22
> maybe we should fix that instead?
I could not fix the phy reg setting for c1108800 setting in dts to look into.
>
>
> Regards
> Martin

Thanks for pointing my mistake.

Actually the dr_mode = "otg"; seem to be correct solution.
with this changes we need to fix the phy-meson8b-usb2.c to enable the
OTG bus port.

Best Regards


-Anand
Anand Moon Jan. 21, 2019, 5:51 p.m. UTC | #3
Hi Martin,

On Sat, 19 Jan 2019 at 03:36, Martin Blumenstingl
<martin.blumenstingl@googlemail.com> wrote:
>
> Hi Anand,
>
> On Sun, Jan 13, 2019 at 7:18 PM Anand Moon <linux.amoon@gmail.com> wrote:
> >
> > Override the dr_mode from "host" to "peripheral" for dwc2
> > usb_phy0->usb0 initialization of OTG Micro-B type.
> > Changes fix the below warning for phy poweron failed --> -22
> >
> > This fix the initialization of c9040000.usb phy.
> >
> > [    1.639706] phy phy-c1108800.phy.0: USB ID detect failed!
> > [    1.643850] phy phy-c1108800.phy.0: phy poweron failed --> -22
> > [    1.649706] ------------[ cut here ]------------
> > [    1.654273] WARNING: CPU: 0 PID: 29 at drivers/regulator/core.c:2054 _regulator_put.part.8+0xf8/0xfc
> > [    1.663400] Modules linked in:
> > [    1.666439] CPU: 0 PID: 29 Comm: kworker/0:1 Not tainted 4.20.0-xc1ml #11
> > [    1.673192] Hardware name: Amlogic Meson platform
> > [    1.677894] Workqueue: events deferred_probe_work_func
> > [    1.683027] [<c0312204>] (unwind_backtrace) from [<c030cb8c>] (show_stack+0x10/0x14)
> > [    1.690746] [<c030cb8c>] (show_stack) from [<c0e223b8>] (dump_stack+0x8c/0xa0)
> > [    1.697953] [<c0e223b8>] (dump_stack) from [<c0346334>] (__warn.part.3+0xbc/0xd8)
> > [    1.705418] [<c0346334>] (__warn.part.3) from [<c03464b0>] (warn_slowpath_null+0x44/0x4c)
> > [    1.713579] [<c03464b0>] (warn_slowpath_null) from [<c07df6b8>] (_regulator_put.part.8+0xf8/0xfc)
> > [    1.722437] [<c07df6b8>] (_regulator_put.part.8) from [<c07df6e4>] (regulator_put+0x28/0x38)
> > [    1.730859] [<c07df6e4>] (regulator_put) from [<c07df71c>] (regulator_bulk_free+0x28/0x38)
> > [    1.739112] [<c07df71c>] (regulator_bulk_free) from [<c0943858>] (release_nodes+0x1bc/0x200)
> > [    1.747537] [<c0943858>] (release_nodes) from [<c093f82c>] (really_probe+0x110/0x2cc)
> > [    1.755350] [<c093f82c>] (really_probe) from [<c093fb4c>] (driver_probe_device+0x60/0x16c)
> > [    1.763599] [<c093fb4c>] (driver_probe_device) from [<c093dcd4>] (bus_for_each_drv+0x80/0xc4)
> > [    1.772110] [<c093dcd4>] (bus_for_each_drv) from [<c093f6ac>] (__device_attach+0xd0/0x138)
> > [    1.780359] [<c093f6ac>] (__device_attach) from [<c093eae4>] (bus_probe_device+0x84/0x8c)
> > [    1.788522] [<c093eae4>] (bus_probe_device) from [<c093ef80>] (deferred_probe_work_func+0x60/0x8c)
> > [    1.797470] [<c093ef80>] (deferred_probe_work_func) from [<c035fdb8>] (process_one_work+0x218/0x504)
> > [    1.806585] [<c035fdb8>] (process_one_work) from [<c0360ea8>] (worker_thread+0x2a8/0x5bc)
> > [    1.814748] [<c0360ea8>] (worker_thread) from [<c0365a18>] (kthread+0x14c/0x154)
> > [    1.822128] [<c0365a18>] (kthread) from [<c03010e8>] (ret_from_fork+0x14/0x2c)
> > [    1.829331] Exception stack(0xee0ebfb0 to 0xee0ebff8)
> > [    1.834369] bfa0:                                     00000000 00000000 00000000 00000000
> > [    1.842534] bfc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
> > [    1.850695] bfe0: 00000000 00000000 00000000 00000000 00000013 00000000
> > [    1.857311] ---[ end trace e28bbc26874282a4 ]---
> > [    1.861984] ------------[ cut here ]------------
> > [    1.866524] WARNING: CPU: 0 PID: 29 at drivers/regulator/core.c:2054 _regulator_put.part.8+0xf8/0xfc
> > [    1.875629] Modules linked in:
> > [    1.878658] CPU: 0 PID: 29 Comm: kworker/0:1 Tainted: GW         4.20.0-xc1ml #11
> > [    1.886817] Hardware name: Amlogic Meson platform
> > [    1.891513] Workqueue: events deferred_probe_work_func
> > [    1.896641] [<c0312204>] (unwind_backtrace) from [<c030cb8c>] (show_stack+0x10/0x14)
> > [    1.904366] [<c030cb8c>] (show_stack) from [<c0e223b8>] (dump_stack+0x8c/0xa0)
> > [    1.911573] [<c0e223b8>] (dump_stack) from [<c0346334>] (__warn.part.3+0xbc/0xd8)
> > [    1.919041] [<c0346334>] (__warn.part.3) from [<c03464b0>] (warn_slowpath_null+0x44/0x4c)
> > [    1.927203] [<c03464b0>] (warn_slowpath_null) from [<c07df6b8>] (_regulator_put.part.8+0xf8/0xfc)
> > [    1.936060] [<c07df6b8>] (_regulator_put.part.8) from [<c07df6e4>] (regulator_put+0x28/0x38)
> > [    1.944483] [<c07df6e4>] (regulator_put) from [<c07df71c>] (regulator_bulk_free+0x28/0x38)
> > [    1.952734] [<c07df71c>] (regulator_bulk_free) from [<c0943858>] (release_nodes+0x1bc/0x200)
> > [    1.961159] [<c0943858>] (release_nodes) from [<c093f82c>] (really_probe+0x110/0x2cc)
> > [    1.968974] [<c093f82c>] (really_probe) from [<c093fb4c>] (driver_probe_device+0x60/0x16c)
> > [    1.977224] [<c093fb4c>] (driver_probe_device) from [<c093dcd4>] (bus_for_each_drv+0x80/0xc4)
> > [    1.985734] [<c093dcd4>] (bus_for_each_drv) from [<c093f6ac>] (__device_attach+0xd0/0x138)
> > [    1.993984] [<c093f6ac>] (__device_attach) from [<c093eae4>] (bus_probe_device+0x84/0x8c)
> > [    2.002147] [<c093eae4>] (bus_probe_device) from [<c093ef80>] (deferred_probe_work_func+0x60/0x8c)
> > [    2.011092] [<c093ef80>] (deferred_probe_work_func) from [<c035fdb8>] (process_one_work+0x218/0x504)
> > [    2.020209] [<c035fdb8>] (process_one_work) from [<c0360ea8>] (worker_thread+0x2a8/0x5bc)
> > [    2.028371] [<c0360ea8>] (worker_thread) from [<c0365a18>] (kthread+0x14c/0x154)
> > [    2.035752] [<c0365a18>] (kthread) from [<c03010e8>] (ret_from_fork+0x14/0x2c)
> > [    2.042955] Exception stack(0xee0ebfb0 to 0xee0ebff8)
> > [    2.047993] bfa0:                                     00000000 00000000 00000000 00000000
> > [    2.056158] bfc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
> > [    2.064320] bfe0: 00000000 00000000 00000000 00000000 00000013 00000000
> > [    2.070934] ---[ end trace e28bbc26874282a5 ]---
> >
> > Cc: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
> > Cc: Jerome Brunet <jbrunet@baylibre.com>
> > Cc: Neil Armstrong <narmstrong@baylibre.com>
> > Signed-off-by: Anand Moon <linux.amoon@gmail.com>
> > ---
> > Rebased on Kevin's amlogic/v5.0/fixes branch
> > Note the warning is not getting produced on the latest kernel.
> > ---
> >  arch/arm/boot/dts/meson8b-odroidc1.dts | 1 +
> >  1 file changed, 1 insertion(+)
> >
> > diff --git a/arch/arm/boot/dts/meson8b-odroidc1.dts b/arch/arm/boot/dts/meson8b-odroidc1.dts
> > index a49a8509b288..9d7f725cfe35 100644
> > --- a/arch/arm/boot/dts/meson8b-odroidc1.dts
> > +++ b/arch/arm/boot/dts/meson8b-odroidc1.dts
> > @@ -318,6 +318,7 @@
> >
> >  &usb0 {
> >         status = "okay";
> > +       dr_mode = "peripheral";
> >  };
> with this change I get the following message during boot:
>   dwc2 c9040000.usb: Configuration mismatch. dr_mode forced to host
>
> as far as I understand your original problem is the following error
> from the USB2 PHY driver:
>   phy phy-c1108800.phy.0: USB ID detect failed!
>   phy phy-c1108800.phy.0: phy poweron failed --> -22
> maybe we should fix that instead?
>
>
> Regards
> Martin

I have tried to fix this bug using dts + phy changes. Please find the
details below.

# cat /sys/kernel/debug/regulator/regulator_summary
 regulator                      use open bypass  opmode voltage
current     min     max
---------------------------------------------------------------------------------------
 regulator-dummy                  6    5      0 unknown     0mV
0mA     0mV     0mV
    c90c0000.usb                  1
0mA     0mV     0mV
    c90c0000.usb                  1
0mA     0mV     0mV
    c9040000.usb                  1
0mA     0mV     0mV
    c9040000.usb                  1
0mA     0mV     0mV
    VCCK                          1    1      0 unknown   860mV
0mA   860mV  1140mV
       cpu0                       0
0mA   860mV   860mV
 P5V0                             3    4      0 unknown  5000mV
0mA  5000mV  5000mV
    VCC1V8                        1    1      0 unknown  1800mV
0mA  1800mV  1800mV
       c1108680.adc               1
0mA     0mV     0mV
    VCC3V3                        1    2      0 unknown  3300mV
0mA  3300mV  3300mV
       VDD_RTC                    0    0      0 unknown   900mV
0mA   900mV   900mV
       TFLASH_VDD                 1    1      0 unknown  3300mV
0mA  3300mV  3300mV
          c1108c20.mmc:slot@1     1
0mA  3300mV  3400mV
    DDR_VDDC                      0    0      0 unknown  1500mV
0mA  1500mV  1500mV
    USB_VBUS                      2    1      0 unknown  5000mV
0mA  5000mV  5000mV
       phy-c1108800.phy.0         2
0mA     0mV     0mV
 TF_IO                            0    1      0 unknown  3300mV
0mA  1800mV  3300mV
    c1108c20.mmc:slot@1           0
0mA     0mV     0mV

# lsusb -t
/:  Bus 02.Port 1: Dev 1, Class=root_hub, Driver=dwc2/1p, 480M
    |__ Port 1: Dev 2, If 0, Class=Hub, Driver=hub/4p, 480M
        |__ Port 1: Dev 6, If 0, Class=Mass Storage, Driver=usb-storage, 480M
        |__ Port 2: Dev 3, If 0, Class=Mass Storage, Driver=usb-storage, 480M
        |__ Port 3: Dev 4, If 1, Class=Video, Driver=uvcvideo, 480M
        |__ Port 3: Dev 4, If 2, Class=Audio, Driver=snd-usb-audio, 480M
        |__ Port 3: Dev 4, If 0, Class=Video, Driver=uvcvideo, 480M
        |__ Port 3: Dev 4, If 3, Class=Audio, Driver=snd-usb-audio, 480M
        |__ Port 4: Dev 5, If 0, Class=Mass Storage, Driver=usb-storage, 480M
/:  Bus 01.Port 1: Dev 1, Class=root_hub, Driver=dwc2/1p, 480M

Now I am trying to fix initialization of the Bus 01.Port (usb0) otg port fix.

Best Regards
-Anand

Patch
diff mbox series

diff --git a/arch/arm/boot/dts/meson8b-odroidc1.dts b/arch/arm/boot/dts/meson8b-odroidc1.dts
index a49a8509b288..9d7f725cfe35 100644
--- a/arch/arm/boot/dts/meson8b-odroidc1.dts
+++ b/arch/arm/boot/dts/meson8b-odroidc1.dts
@@ -318,6 +318,7 @@ 
 
 &usb0 {
 	status = "okay";
+	dr_mode = "peripheral";
 };
 
 &usb1 {