[v4,08/13] x86/fsgsbase/64: Introduce the FIND_PERCPU_BASE macro
diff mbox series

Message ID 20190116224849.8617-9-chang.seok.bae@intel.com
State Superseded
Headers show
Series
  • x86: Enable FSGSBASE instructions
Related show

Commit Message

Bae, Chang Seok Jan. 16, 2019, 10:48 p.m. UTC
GSBASE is used to find per-CPU data in the kernel. But when it is unknown,
the per-CPU base can be found from the per_cpu_offset table with a CPU NR.
The CPU NR is extracted from the limit field of the CPUNODE entry in GDT,
or by the RDPID instruction.

Also, add the GAS-compatible RDPID macro.

The new macro will be used on a following patch.

Suggested-by: H. Peter Anvin <hpa@zytor.com>
Signed-off-by: Chang S. Bae <chang.seok.bae@intel.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
---
 arch/x86/include/asm/fsgsbase.h | 38 +++++++++++++++++++++++++++++++++
 arch/x86/include/asm/inst.h     | 15 +++++++++++++
 2 files changed, 53 insertions(+)

Patch
diff mbox series

diff --git a/arch/x86/include/asm/fsgsbase.h b/arch/x86/include/asm/fsgsbase.h
index 3611bd781088..a67531ebac35 100644
--- a/arch/x86/include/asm/fsgsbase.h
+++ b/arch/x86/include/asm/fsgsbase.h
@@ -110,6 +110,44 @@  extern void x86_gsbase_write_cpu_inactive(unsigned long gsbase);
 	MODRM 0xd0 wrgsbase_opd 1
 .endm
 
+#if CONFIG_SMP
+
+/*
+ * CPU/node NR is loaded from the limit (size) field of a special segment
+ * descriptor entry in GDT.
+ */
+.macro LOAD_CPU_AND_NODE_SEG_LIMIT reg:req
+	movq	$__CPUNODE_SEG, \reg
+	lsl	\reg, \reg
+.endm
+
+/*
+ * Fetch the per-CPU GSBASE value for this processor and put it in @reg.
+ * We normally use %gs for accessing per-CPU data, but we are setting up
+ * %gs here and obviously can not use %gs itself to access per-CPU data.
+ */
+.macro FIND_PERCPU_BASE reg:req
+	/*
+	 * The CPU/node NR is initialized earlier, directly in cpu_init().
+	 * The CPU NR is extracted from it.
+	 */
+	ALTERNATIVE \
+		"LOAD_CPU_AND_NODE_SEG_LIMIT \reg", \
+		"RDPID	\reg", \
+		X86_FEATURE_RDPID
+	andq	$VDSO_CPUNODE_MASK, \reg
+	movq	__per_cpu_offset(, \reg, 8), \reg
+.endm
+
+#else
+
+.macro FIND_PERCPU_BASE reg:req
+	/* Tracking the base offset value */
+	movq	pcpu_unit_offsets(%rip), \reg
+.endm
+
+#endif /* CONFIG_SMP */
+
 #endif /* CONFIG_X86_64 */
 
 #endif /* __ASSEMBLY__ */
diff --git a/arch/x86/include/asm/inst.h b/arch/x86/include/asm/inst.h
index f5a796da07f8..d063841a17e3 100644
--- a/arch/x86/include/asm/inst.h
+++ b/arch/x86/include/asm/inst.h
@@ -306,6 +306,21 @@ 
 	.endif
 	MODRM 0xc0 movq_r64_xmm_opd1 movq_r64_xmm_opd2
 	.endm
+
+.macro RDPID opd
+	REG_TYPE rdpid_opd_type \opd
+	.if rdpid_opd_type == REG_TYPE_R64
+	R64_NUM rdpid_opd \opd
+	.else
+	R32_NUM rdpid_opd \opd
+	.endif
+	.byte 0xf3
+	.if rdpid_opd > 7
+	PFX_REX rdpid_opd 0
+	.endif
+	.byte 0x0f, 0xc7
+	MODRM 0xc0 rdpid_opd 0x7
+.endm
 #endif
 
 #endif