From: Masahiro Yamada <yamada.masahiro@socionext.com>
To: linux-kbuild@vger.kernel.org
Cc: Masahiro Yamada <yamada.masahiro@socionext.com>,
Michal Marek <michal.lkml@markovi.net>,
linux-kernel@vger.kernel.org
Subject: [PATCH 3/3] kbuild: remove unnecessary in-subshell execution
Date: Thu, 17 Jan 2019 13:10:31 +0900 [thread overview]
Message-ID: <1547698231-20985-3-git-send-email-yamada.masahiro@socionext.com> (raw)
In-Reply-To: <1547698231-20985-1-git-send-email-yamada.masahiro@socionext.com>
The commands surrounded by ( ) are executed in a subshell, but in
most cases, we do not need to spawn an extra subshell.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
---
scripts/Makefile.build | 4 ++--
scripts/Makefile.lib | 21 ++++++++++-----------
scripts/mkcompile_h | 4 ++--
3 files changed, 14 insertions(+), 15 deletions(-)
diff --git a/scripts/Makefile.build b/scripts/Makefile.build
index 9800178..f8e2794 100644
--- a/scripts/Makefile.build
+++ b/scripts/Makefile.build
@@ -312,11 +312,11 @@ $(real-obj-m:.o=.s): modkern_aflags := $(KBUILD_AFLAGS_MODULE) $(AFLAGS_MODULE)
#
# These mirror gensymtypes_c and co above, keep them in synch.
cmd_gensymtypes_S = \
- (echo "\#include <linux/kernel.h>" ; \
+ { echo "\#include <linux/kernel.h>" ; \
echo "\#include <asm/asm-prototypes.h>" ; \
$(CPP) $(a_flags) $< | \
grep "\<___EXPORT_SYMBOL\>" | \
- sed 's/.*___EXPORT_SYMBOL[[:space:]]*\([a-zA-Z0-9_]*\)[[:space:]]*,.*/EXPORT_SYMBOL(\1);/' ) | \
+ sed 's/.*___EXPORT_SYMBOL[[:space:]]*\([a-zA-Z0-9_]*\)[[:space:]]*,.*/EXPORT_SYMBOL(\1);/' ; } | \
$(CPP) -D__GENKSYMS__ $(c_flags) -xc - | \
$(GENKSYMS) $(if $(1), -T $(2)) \
$(patsubst y,-R,$(CONFIG_MODULE_REL_CRCS)) \
diff --git a/scripts/Makefile.lib b/scripts/Makefile.lib
index c6fc295..c0abd9a 100644
--- a/scripts/Makefile.lib
+++ b/scripts/Makefile.lib
@@ -271,7 +271,7 @@ DTC_FLAGS += $(DTC_FLAGS_$(basetarget))
# Generate an assembly file to wrap the output of the device tree compiler
quiet_cmd_dt_S_dtb= DTB $@
cmd_dt_S_dtb= \
-( \
+{ \
echo '\#include <asm-generic/vmlinux.lds.h>'; \
echo '.section .dtb.init.rodata,"a"'; \
echo '.balign STRUCT_ALIGNMENT'; \
@@ -281,7 +281,7 @@ cmd_dt_S_dtb= \
echo '__dtb_$(subst -,_,$(*F))_end:'; \
echo '.global __dtb_$(subst -,_,$(*F))_end'; \
echo '.balign STRUCT_ALIGNMENT'; \
-) > $@
+} > $@
$(obj)/%.dtb.S: $(obj)/%.dtb FORCE
$(call if_changed,dt_S_dtb)
@@ -335,20 +335,20 @@ printf "%08x\n" $$dec_size | \
)
quiet_cmd_bzip2 = BZIP2 $@
- cmd_bzip2 = (cat $(real-prereqs) | bzip2 -9 && $(size_append)) > $@
+ cmd_bzip2 = { cat $(real-prereqs) | bzip2 -9 && $(size_append); } > $@
# Lzma
# ---------------------------------------------------------------------------
quiet_cmd_lzma = LZMA $@
- cmd_lzma = (cat $(real-prereqs) | lzma -9 && $(size_append)) > $@
+ cmd_lzma = { cat $(real-prereqs) | lzma -9 && $(size_append); } > $@
quiet_cmd_lzo = LZO $@
- cmd_lzo = (cat $(real-prereqs) | lzop -9 && $(size_append)) > $@
+ cmd_lzo = { cat $(real-prereqs) | lzop -9 && $(size_append); } > $@
quiet_cmd_lz4 = LZ4 $@
- cmd_lz4 = (cat $(real-prereqs) | lz4c -l -c1 stdin stdout && \
- $(size_append)) > $@
+ cmd_lz4 = { cat $(real-prereqs) | lz4c -l -c1 stdin stdout && \
+ $(size_append); } > $@
# U-Boot mkimage
# ---------------------------------------------------------------------------
@@ -390,12 +390,11 @@ quiet_cmd_uimage = UIMAGE $@
# big dictionary would increase the memory usage too much in the multi-call
# decompression mode. A BCJ filter isn't used either.
quiet_cmd_xzkern = XZKERN $@
- cmd_xzkern = (cat $(real-prereqs) | \
- sh $(srctree)/scripts/xz_wrap.sh && $(size_append)) > $@
+ cmd_xzkern = { cat $(real-prereqs) | sh $(srctree)/scripts/xz_wrap.sh && \
+ $(size_append); } > $@
quiet_cmd_xzmisc = XZMISC $@
- cmd_xzmisc = (cat $(real-prereqs) | \
- xz --check=crc32 --lzma2=dict=1MiB) > $@
+ cmd_xzmisc = cat $(real-prereqs) | xz --check=crc32 --lzma2=dict=1MiB > $@
# ASM offsets
# ---------------------------------------------------------------------------
diff --git a/scripts/mkcompile_h b/scripts/mkcompile_h
index 87f1fc9..2339f86 100755
--- a/scripts/mkcompile_h
+++ b/scripts/mkcompile_h
@@ -62,7 +62,7 @@ UTS_TRUNCATE="cut -b -$UTS_LEN"
# Generate a temporary compile.h
-( echo /\* This file is auto generated, version $VERSION \*/
+{ echo /\* This file is auto generated, version $VERSION \*/
if [ -n "$CONFIG_FLAGS" ] ; then echo "/* $CONFIG_FLAGS */"; fi
echo \#define UTS_MACHINE \"$ARCH\"
@@ -73,7 +73,7 @@ UTS_TRUNCATE="cut -b -$UTS_LEN"
echo \#define LINUX_COMPILE_HOST \"`echo $LINUX_COMPILE_HOST | $UTS_TRUNCATE`\"
echo \#define LINUX_COMPILER \"`$CC -v 2>&1 | grep ' version ' | sed 's/[[:space:]]*$//'`\"
-) > .tmpcompile
+} > .tmpcompile
# Only replace the real compile.h if the new one is different,
# in order to preserve the timestamp and avoid unnecessary
--
2.7.4
prev parent reply other threads:[~2019-01-17 4:11 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-01-17 4:10 [PATCH 1/3] kbuild: simplify rules of data compression with size appending Masahiro Yamada
2019-01-17 4:10 ` [PATCH 2/3] kbuild: add real-prereqs shorthand for $(filter-out FORCE,$^) Masahiro Yamada
2019-01-17 4:22 ` [PATCH 2/3] kbuild: add real-prereqs shorthand for $(filter-out FORCE, $^) Alexey Kardashevskiy
2019-01-17 5:59 ` yamada.masahiro
2019-01-17 4:10 ` Masahiro Yamada [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1547698231-20985-3-git-send-email-yamada.masahiro@socionext.com \
--to=yamada.masahiro@socionext.com \
--cc=linux-kbuild@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=michal.lkml@markovi.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).