From: Vijay Khemka <vijaykhemka@fb.com>
To: Lee Jones <lee.jones@linaro.org>,
Rob Herring <robh+dt@kernel.org>,
Mark Rutland <mark.rutland@arm.com>,
Joel Stanley <joel@jms.id.au>, Andrew Jeffery <andrew@aj.id.au>,
<devicetree@vger.kernel.org>,
<linux-arm-kernel@lists.infradead.org>,
<linux-aspeed@lists.ozlabs.org>, <linux-kernel@vger.kernel.org>
Cc: <vijaykhemka@fb.com>,
"openbmc @ lists . ozlabs . org" <openbmc@lists.ozlabs.org>
Subject: [PATCH v2] dt-bindings: aspeed-lpc: Make parameter optional
Date: Fri, 18 Jan 2019 12:15:47 -0800 [thread overview]
Message-ID: <20190118201547.640173-1-vijaykhemka@fb.com> (raw)
Memory-region and flash phandle is not a required parameter, it is
optional to describe in device tree and needed only use basis.
Signed-off-by: Vijay Khemka <vijaykhemka@fb.com>
---
Documentation/devicetree/bindings/mfd/aspeed-lpc.txt | 3 +++
1 file changed, 3 insertions(+)
diff --git a/Documentation/devicetree/bindings/mfd/aspeed-lpc.txt b/Documentation/devicetree/bindings/mfd/aspeed-lpc.txt
index 34dd89087cff..d28c4e117611 100644
--- a/Documentation/devicetree/bindings/mfd/aspeed-lpc.txt
+++ b/Documentation/devicetree/bindings/mfd/aspeed-lpc.txt
@@ -135,6 +135,9 @@ Required properties:
- clocks: contains a phandle to the syscon node describing the clocks.
There should then be one cell representing the clock to use
+Optional properties:
+These below properties are optional to define.
+
- memory-region: A phandle to a reserved_memory region to be used for the LPC
to AHB mapping
--
2.17.1
next reply other threads:[~2019-01-18 20:16 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-01-18 20:15 Vijay Khemka [this message]
2019-01-29 12:30 ` [PATCH v2] dt-bindings: aspeed-lpc: Make parameter optional Lee Jones
2019-01-29 23:00 ` Vijay Khemka
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190118201547.640173-1-vijaykhemka@fb.com \
--to=vijaykhemka@fb.com \
--cc=andrew@aj.id.au \
--cc=devicetree@vger.kernel.org \
--cc=joel@jms.id.au \
--cc=lee.jones@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-aspeed@lists.ozlabs.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mark.rutland@arm.com \
--cc=openbmc@lists.ozlabs.org \
--cc=robh+dt@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).