From: Philippe Schenker <dev@pschenker.ch>
To: shawnguo@kernel.org, s.hauer@pengutronix.de,
thierry.reding@gmail.com, linux-tegra@vger.kernel.org,
linux-arm-kernel@lists.infradead.org
Cc: marcel.ziswiler@toradex.com, stefan@agner.ch,
max.krummenacher@toradex.com,
Philippe Schenker <philippe.schenker@toradex.com>,
devicetree@vger.kernel.org,
Jonathan Hunter <jonathanh@nvidia.com>,
linux-kernel@vger.kernel.org, Rob Herring <robh+dt@kernel.org>,
Mark Rutland <mark.rutland@arm.com>
Subject: [PATCH 2/2] ARM: dts: Add stmpe-adc DT node to Toradex T30 modules
Date: Tue, 22 Jan 2019 14:21:35 +0100 [thread overview]
Message-ID: <20190122132135.5012-3-dev@pschenker.ch> (raw)
In-Reply-To: <20190122132135.5012-1-dev@pschenker.ch>
From: Philippe Schenker <philippe.schenker@toradex.com>
Add the stmpe-adc DT node as found on Toradex T30 modules
Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com>
---
arch/arm/boot/dts/tegra30-apalis-v1.1.dtsi | 22 ++++++++++++++--------
arch/arm/boot/dts/tegra30-apalis.dtsi | 22 ++++++++++++++--------
arch/arm/boot/dts/tegra30-colibri.dtsi | 22 ++++++++++++++--------
3 files changed, 42 insertions(+), 24 deletions(-)
diff --git a/arch/arm/boot/dts/tegra30-apalis-v1.1.dtsi b/arch/arm/boot/dts/tegra30-apalis-v1.1.dtsi
index 02f8126481a2..8b7a827d604d 100644
--- a/arch/arm/boot/dts/tegra30-apalis-v1.1.dtsi
+++ b/arch/arm/boot/dts/tegra30-apalis-v1.1.dtsi
@@ -994,11 +994,17 @@
id = <0>;
blocks = <0x5>;
irq-trigger = <0x1>;
+ /* 3.25 MHz ADC clock speed */
+ st,adc-freq = <1>;
+ /* 12-bit ADC */
+ st,mod-12b = <1>;
+ /* internal ADC reference */
+ st,ref-sel = <0>;
+ /* ADC converstion time: 80 clocks */
+ st,sample-time = <4>;
stmpe_touchscreen {
compatible = "st,stmpe-ts";
- /* 3.25 MHz ADC clock speed */
- st,adc-freq = <1>;
/* 8 sample average control */
st,ave-ctrl = <3>;
/* 7 length fractional part in z */
@@ -1008,17 +1014,17 @@
* current limit value
*/
st,i-drive = <1>;
- /* 12-bit ADC */
- st,mod-12b = <1>;
- /* internal ADC reference */
- st,ref-sel = <0>;
- /* ADC converstion time: 80 clocks */
- st,sample-time = <4>;
/* 1 ms panel driver settling time */
st,settling = <3>;
/* 5 ms touch detect interrupt delay */
st,touch-det-delay = <5>;
};
+
+ stmpe_adc {
+ compatible = "st,stmpe-adc";
+ /* forbid to use ADC channels 3-0 (touch) */
+ st,norequest-mask = <0x0F>;
+ };
};
/*
diff --git a/arch/arm/boot/dts/tegra30-apalis.dtsi b/arch/arm/boot/dts/tegra30-apalis.dtsi
index 7f112f192fe9..c18f6f61d764 100644
--- a/arch/arm/boot/dts/tegra30-apalis.dtsi
+++ b/arch/arm/boot/dts/tegra30-apalis.dtsi
@@ -976,11 +976,17 @@
id = <0>;
blocks = <0x5>;
irq-trigger = <0x1>;
+ /* 3.25 MHz ADC clock speed */
+ st,adc-freq = <1>;
+ /* 12-bit ADC */
+ st,mod-12b = <1>;
+ /* internal ADC reference */
+ st,ref-sel = <0>;
+ /* ADC converstion time: 80 clocks */
+ st,sample-time = <4>;
stmpe_touchscreen {
compatible = "st,stmpe-ts";
- /* 3.25 MHz ADC clock speed */
- st,adc-freq = <1>;
/* 8 sample average control */
st,ave-ctrl = <3>;
/* 7 length fractional part in z */
@@ -990,17 +996,17 @@
* current limit value
*/
st,i-drive = <1>;
- /* 12-bit ADC */
- st,mod-12b = <1>;
- /* internal ADC reference */
- st,ref-sel = <0>;
- /* ADC converstion time: 80 clocks */
- st,sample-time = <4>;
/* 1 ms panel driver settling time */
st,settling = <3>;
/* 5 ms touch detect interrupt delay */
st,touch-det-delay = <5>;
};
+
+ stmpe_adc {
+ compatible = "st,stmpe-adc";
+ /* forbid to use ADC channels 3-0 (touch) */
+ st,norequest-mask = <0x0F>;
+ };
};
/*
diff --git a/arch/arm/boot/dts/tegra30-colibri.dtsi b/arch/arm/boot/dts/tegra30-colibri.dtsi
index 35af03ca9e90..3c421a5cfbc2 100644
--- a/arch/arm/boot/dts/tegra30-colibri.dtsi
+++ b/arch/arm/boot/dts/tegra30-colibri.dtsi
@@ -845,11 +845,17 @@
id = <0>;
blocks = <0x5>;
irq-trigger = <0x1>;
+ /* 3.25 MHz ADC clock speed */
+ st,adc-freq = <1>;
+ /* 12-bit ADC */
+ st,mod-12b = <1>;
+ /* internal ADC reference */
+ st,ref-sel = <0>;
+ /* ADC converstion time: 80 clocks */
+ st,sample-time = <4>;
stmpe_touchscreen {
compatible = "st,stmpe-ts";
- /* 3.25 MHz ADC clock speed */
- st,adc-freq = <1>;
/* 8 sample average control */
st,ave-ctrl = <3>;
/* 7 length fractional part in z */
@@ -859,17 +865,17 @@
* current limit value
*/
st,i-drive = <1>;
- /* 12-bit ADC */
- st,mod-12b = <1>;
- /* internal ADC reference */
- st,ref-sel = <0>;
- /* ADC converstion time: 80 clocks */
- st,sample-time = <4>;
/* 1 ms panel driver settling time */
st,settling = <3>;
/* 5 ms touch detect interrupt delay */
st,touch-det-delay = <5>;
};
+
+ stmpe_adc {
+ compatible = "st,stmpe-adc";
+ /* forbid to use ADC channels 3-0 (touch) */
+ st,norequest-mask = <0x0F>;
+ };
};
/*
--
2.20.1
next prev parent reply other threads:[~2019-01-22 13:22 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-01-22 13:21 [PATCH 0/2] Adding DTS to support STMPE811 ADC on Toradex Boards Philippe Schenker
2019-01-22 13:21 ` [PATCH 1/2] ARM: dts: Add stmpe-adc DT node to Toradex iMX6 modules Philippe Schenker
2019-01-22 14:53 ` Stefan Agner
2019-01-22 13:21 ` Philippe Schenker [this message]
2019-01-22 14:53 ` [PATCH 2/2] ARM: dts: Add stmpe-adc DT node to Toradex T30 modules Stefan Agner
2019-02-01 3:36 ` [PATCH 0/2] Adding DTS to support STMPE811 ADC on Toradex Boards Shawn Guo
2019-02-12 9:09 ` Shawn Guo
2019-02-12 9:18 ` Philippe Schenker
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190122132135.5012-3-dev@pschenker.ch \
--to=dev@pschenker.ch \
--cc=devicetree@vger.kernel.org \
--cc=jonathanh@nvidia.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-tegra@vger.kernel.org \
--cc=marcel.ziswiler@toradex.com \
--cc=mark.rutland@arm.com \
--cc=max.krummenacher@toradex.com \
--cc=philippe.schenker@toradex.com \
--cc=robh+dt@kernel.org \
--cc=s.hauer@pengutronix.de \
--cc=shawnguo@kernel.org \
--cc=stefan@agner.ch \
--cc=thierry.reding@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).