From: Jagan Teki <jagan@amarulasolutions.com>
To: Maxime Ripard <maxime.ripard@bootlin.com>,
David Airlie <airlied@linux.ie>, Daniel Vetter <daniel@ffwll.ch>,
Chen-Yu Tsai <wens@csie.org>,
Michael Turquette <mturquette@baylibre.com>,
Rob Herring <robh+dt@kernel.org>,
Mark Rutland <mark.rutland@arm.com>
Cc: linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org, linux-clk@vger.kernel.org,
dri-devel@lists.freedesktop.org, devicetree@vger.kernel.org,
Michael Trimarchi <michael@amarulasolutions.com>,
linux-amarula@amarulasolutions.com, linux-sunxi@googlegroups.com,
Jagan Teki <jagan@amarulasolutions.com>
Subject: [PATCH v6 02/22] drm/sun4i: sun6i_mipi_dsi: Support instruction loop selection
Date: Fri, 25 Jan 2019 01:28:40 +0530 [thread overview]
Message-ID: <20190124195900.22620-3-jagan@amarulasolutions.com> (raw)
In-Reply-To: <20190124195900.22620-1-jagan@amarulasolutions.com>
Instruction loop selection would require before writing
loop number registers, so enable idle, LP11 bits on
loop selection register.
Reference code available in BSP (from linux-sunxi/
drivers/video/sunxi/disp2/disp/de/lowlevel_sun50iw1/de_dsi.c)
(dsi_dev[sel]->dsi_inst_loop_sel.dwval = 2<<(4*DSI_INST_ID_LP11) |
3<<(4*DSI_INST_ID_DLY);
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
---
drivers/gpu/drm/sun4i/sun6i_mipi_dsi.c | 3 +++
1 file changed, 3 insertions(+)
diff --git a/drivers/gpu/drm/sun4i/sun6i_mipi_dsi.c b/drivers/gpu/drm/sun4i/sun6i_mipi_dsi.c
index a5fcee750bee..813d5523f1c7 100644
--- a/drivers/gpu/drm/sun4i/sun6i_mipi_dsi.c
+++ b/drivers/gpu/drm/sun4i/sun6i_mipi_dsi.c
@@ -403,6 +403,9 @@ static void sun6i_dsi_setup_inst_loop(struct sun6i_dsi *dsi,
{
u16 delay = sun6i_dsi_setup_inst_delay(dsi, mode);
+ regmap_write(dsi->regs, SUN6I_DSI_INST_LOOP_SEL_REG,
+ DSI_INST_ID_HSC << (4 * DSI_INST_ID_LP11) |
+ DSI_INST_ID_HSD << (4 * DSI_INST_ID_DLY));
regmap_write(dsi->regs, SUN6I_DSI_INST_LOOP_NUM_REG(0),
SUN6I_DSI_INST_LOOP_NUM_N0(50 - 1) |
SUN6I_DSI_INST_LOOP_NUM_N1(delay));
--
2.18.0.321.gffc6fa0e3
next prev parent reply other threads:[~2019-01-24 19:59 UTC|newest]
Thread overview: 65+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-01-24 19:58 [PATCH v6 00/22] drm/sun4i: Allwinner A64 MIPI-DSI support Jagan Teki
2019-01-24 19:58 ` [PATCH v6 01/22] drm/sun4i: sun6i_mipi_dsi: Compute burst mode loop N1 instruction delay Jagan Teki
2019-01-24 19:58 ` Jagan Teki [this message]
2019-01-24 19:58 ` [PATCH v6 03/22] drm/sun4i: sun6i_mipi_dsi: Setup burst mode timings Jagan Teki
2019-01-24 19:58 ` [PATCH v6 04/22] drm/sun4i: sun6i_mipi_dsi: Simplify drq to support all modes Jagan Teki
2019-01-24 19:58 ` [PATCH v6 05/22] drm/sun4i: tcon: Export get tcon0 routine Jagan Teki
2019-01-24 19:58 ` [PATCH v6 06/22] drm/sun4i: sun6i_mipi_dsi: Probe tcon0 during dsi_bind Jagan Teki
2019-01-24 19:58 ` [PATCH v6 07/22] drm/sun4i: sun6i_mipi_dsi: Setup burst mode Jagan Teki
2019-01-24 19:58 ` [PATCH v6 08/22] drm/sun4i: sun6i_mipi_dsi: Enable 2byte trail for 4-lane " Jagan Teki
2019-01-24 19:58 ` [PATCH v6 09/22] drm/sun4i: sun6i_mipi_dsi: Enable burst mode HBP, HSA_HSE Jagan Teki
2019-01-24 19:58 ` [PATCH v6 10/22] clk: sunxi-ng: Add check for minimal rate to NKM PLLs Jagan Teki
2019-01-24 19:58 ` [PATCH v6 11/22] clk: sunxi-ng: a64: Add minimum rate for PLL_MIPI Jagan Teki
2019-01-25 21:24 ` Maxime Ripard
2019-01-28 9:36 ` Jagan Teki
2019-01-29 15:13 ` Maxime Ripard
2019-01-29 17:31 ` Jagan Teki
2019-02-01 14:31 ` Maxime Ripard
2019-02-01 16:33 ` Jagan Teki
2019-02-11 14:07 ` Jagan Teki
2019-02-12 9:30 ` Maxime Ripard
2019-02-12 9:38 ` Jagan Teki
2019-05-24 10:07 ` Jagan Teki
2019-06-05 6:49 ` Maxime Ripard
2019-06-05 7:33 ` Jagan Teki
2019-06-14 14:24 ` Maxime Ripard
2019-06-20 18:27 ` Jagan Teki
2019-06-25 14:49 ` Maxime Ripard
2019-06-25 15:30 ` Jagan Teki
2019-07-03 11:49 ` Maxime Ripard
2019-07-05 17:52 ` Michael Nazzareno Trimarchi
2019-07-11 10:01 ` Maxime Ripard
2019-07-11 17:43 ` Michael Nazzareno Trimarchi
2019-07-11 19:34 ` Michael Nazzareno Trimarchi
2019-07-20 6:58 ` Maxime Ripard
2019-07-20 7:16 ` Jagan Teki
2019-07-20 7:34 ` Jagan Teki
2019-07-20 9:32 ` Maxime Ripard
2019-07-20 9:42 ` Michael Nazzareno Trimarchi
2019-07-22 10:21 ` Jagan Teki
2019-07-22 10:25 ` Michael Nazzareno Trimarchi
2019-07-22 10:38 ` Jagan Teki
2019-07-24 9:05 ` Maxime Ripard
2019-07-29 6:59 ` Michael Nazzareno Trimarchi
2019-08-02 8:38 ` Michael Nazzareno Trimarchi
2019-08-13 6:05 ` Maxime Ripard
2019-08-15 12:25 ` Michael Nazzareno Trimarchi
2019-08-28 13:03 ` Maxime Ripard
2019-08-28 13:09 ` Michael Nazzareno Trimarchi
2019-01-24 19:58 ` [PATCH v6 12/22] dt-bindings: sun6i-dsi: Add VCC-DSI supply property Jagan Teki
2019-01-25 15:47 ` Maxime Ripard
2019-01-24 19:58 ` [PATCH v6 13/22] drm/sun4i: sun6i_mipi_dsi: Add support for VCC-DSI voltage regulator Jagan Teki
2019-01-24 19:58 ` [PATCH v6 14/22] dt-bindings: sun6i-dsi: Add A64 DSI compatible (w/ A31 fallback) Jagan Teki
2019-01-25 15:52 ` Maxime Ripard
2019-01-26 16:09 ` [linux-sunxi] " Jagan Teki
2019-01-29 14:54 ` Maxime Ripard
2019-01-24 19:58 ` [PATCH v6 15/22] dt-bindings: sun6i-dsi: Add A64 DPHY " Jagan Teki
2019-01-25 15:52 ` Maxime Ripard
2019-01-24 19:58 ` [PATCH v6 16/22] arm64: dts: allwinner: a64: Add DSI pipeline Jagan Teki
2019-01-25 18:51 ` Maxime Ripard
2019-01-24 19:58 ` [DO NOT MERGE] [PATCH v6 17/22] arm64: allwinner: a64: pine64-lts: Enable Feiyang FY07024DI26A30-D DSI panel Jagan Teki
2019-01-24 19:58 ` [PATCH v6 18/22] drm/sun4i: sun6i_mipi_dsi: Add DSI Generic short write 2 param transfer Jagan Teki
2019-01-24 19:58 ` [DO NOT MERGE] [PATCH v6 19/22] arm64: dts: allwinner: bananapi-m64: Bananapi S070WV20-CT16 DSI panel Jagan Teki
2019-01-24 19:58 ` [PATCH v6 20/22] drm/sun4i: sun6i_mipi_dsi: Fix DSI hbp timing value Jagan Teki
2019-01-24 19:58 ` [PATCH v6 21/22] drm/sun4i: sun6i_mipi_dsi: Fix DSI hfp " Jagan Teki
2019-01-24 19:59 ` [PATCH v6 22/22] arm64: dts: allwinner: a64-amarula-relic: Add Techstar TS8550B MIPI-DSI panel Jagan Teki
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190124195900.22620-3-jagan@amarulasolutions.com \
--to=jagan@amarulasolutions.com \
--cc=airlied@linux.ie \
--cc=daniel@ffwll.ch \
--cc=devicetree@vger.kernel.org \
--cc=dri-devel@lists.freedesktop.org \
--cc=linux-amarula@amarulasolutions.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-clk@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-sunxi@googlegroups.com \
--cc=mark.rutland@arm.com \
--cc=maxime.ripard@bootlin.com \
--cc=michael@amarulasolutions.com \
--cc=mturquette@baylibre.com \
--cc=robh+dt@kernel.org \
--cc=wens@csie.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).