From: "Paweł Chmiel" <pawel.mikolaj.chmiel@gmail.com>
To: dmitry.torokhov@gmail.com
Cc: robh+dt@kernel.org, mark.rutland@arm.com,
mchehab+samsung@kernel.org, colyli@suse.de,
ckeepax@opensource.wolfsonmicro.com, andrew.smirnov@gmail.com,
arnd@arndb.de, xiaotong.lu@spreadtrum.com, xc-racer2@live.ca,
pawel.mikolaj.chmiel@gmail.com, linux-input@vger.kernel.org,
linux-kernel@vger.kernel.org, devicetree@vger.kernel.org
Subject: [PATCH 4/4] dt-bindings: input: Add documentation for gp2a sensor
Date: Fri, 25 Jan 2019 18:50:45 +0100 [thread overview]
Message-ID: <20190125175045.22576-5-pawel.mikolaj.chmiel@gmail.com> (raw)
In-Reply-To: <20190125175045.22576-1-pawel.mikolaj.chmiel@gmail.com>
From: Jonathan Bakker <xc-racer2@live.ca>
This commit adds documentation for Sharp GP2AP002A00F.
It's Proximity/Opto Sensor connected over i2c.
Signed-off-by: Jonathan Bakker <xc-racer2@live.ca>
Signed-off-by: Paweł Chmiel <pawel.mikolaj.chmiel@gmail.com>
---
.../bindings/input/sharp,gp2ap002a00f.txt | 29 +++++++++++++++++++
1 file changed, 29 insertions(+)
create mode 100644 Documentation/devicetree/bindings/input/sharp,gp2ap002a00f.txt
diff --git a/Documentation/devicetree/bindings/input/sharp,gp2ap002a00f.txt b/Documentation/devicetree/bindings/input/sharp,gp2ap002a00f.txt
new file mode 100644
index 000000000000..c524eb7d3d60
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/sharp,gp2ap002a00f.txt
@@ -0,0 +1,29 @@
+* Sharp GP2AP002A00F I2C Proximity/Opto Sensor
+
+Required properties:
+- compatible : Should be "sharp,gp2ap002a00f"
+- reg : The I2C address of the sensor
+- vout-gpio : The gpio connected to the vout pin
+- interrupt-parent : should be the phandle for the interrupt controller
+- interrupts : Interrupt mapping for GPIO IRQ, it should by configured with
+ flags IRQ_TYPE_EDGE_BOTH
+
+Optional properties:
+- wakeup : If the device is capable of waking up the system
+- io-channels : Phandle to an ADC channel connected to the light sensor
+- io-channel-names = "light";
+- poll-interval : Poll interval time in milliseconds, default 500ms
+- light-adc-max : Maximum light value reported, default 4096
+- light-adc-fuzz : Fuzz value for reported light value, default 80
+
+Example:
+
+gp2a@44 {
+ compatible = "sharp,gp2ap002a00f";
+ reg = <0x44>;
+ vout-gpio = <&gph0 2 GPIO_ACTIVE_HIGH>;
+ interrupt-parent = <&gph0>;
+ interrupts = <2 IRQ_TYPE_EDGE_BOTH>;
+ io-channels = <&adc 9>;
+ io-channel-names = "light";
+};
--
2.17.1
next prev parent reply other threads:[~2019-01-25 17:51 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-01-25 17:50 [PATCH 0/4] input: misc: gp2a: Add device tree support Paweł Chmiel
2019-01-25 17:50 ` [PATCH 1/4] input: misc: gp2a: Use managed resource helpers Paweł Chmiel
2019-01-26 1:17 ` Dmitry Torokhov
2019-01-25 17:50 ` [PATCH 2/4] input: misc: gp2a: Add support for light sensor Paweł Chmiel
2019-01-26 1:18 ` Dmitry Torokhov
2019-01-25 17:50 ` [PATCH 3/4] input: misc: gp2a: Enable device tree Paweł Chmiel
2019-01-25 17:50 ` Paweł Chmiel [this message]
2019-01-26 1:32 ` [PATCH 4/4] dt-bindings: input: Add documentation for gp2a sensor Dmitry Torokhov
2019-01-26 3:14 ` Jonathan Bakker
2019-01-28 19:30 ` Dmitry Torokhov
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190125175045.22576-5-pawel.mikolaj.chmiel@gmail.com \
--to=pawel.mikolaj.chmiel@gmail.com \
--cc=andrew.smirnov@gmail.com \
--cc=arnd@arndb.de \
--cc=ckeepax@opensource.wolfsonmicro.com \
--cc=colyli@suse.de \
--cc=devicetree@vger.kernel.org \
--cc=dmitry.torokhov@gmail.com \
--cc=linux-input@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mark.rutland@arm.com \
--cc=mchehab+samsung@kernel.org \
--cc=robh+dt@kernel.org \
--cc=xc-racer2@live.ca \
--cc=xiaotong.lu@spreadtrum.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).