linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Lukasz Luba <l.luba@partner.samsung.com>
To: devicetree@vger.kernel.org
Cc: b.zolnierkie@samsung.com, myungjoo.ham@samsung.com,
	krzk@kernel.org, Lukasz Luba <l.luba@partner.samsung.com>,
	Sylwester Nawrocki <s.nawrocki@samsung.com>,
	Chanwoo Choi <cw00.choi@samsung.com>,
	Michael Turquette <mturquette@baylibre.com>,
	Stephen Boyd <sboyd@kernel.org>, Kukjin Kim <kgene@kernel.org>,
	linux-samsung-soc@vger.kernel.org, linux-clk@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org,
	linux-kernel@vger.kernel.org
Subject: [PATCH 2/8] clk: samsung: add new clocks for DMC for Exynos5422 SoC
Date: Mon, 28 Jan 2019 20:21:33 +0100	[thread overview]
Message-ID: <1548703299-15806-3-git-send-email-l.luba@partner.samsung.com> (raw)
In-Reply-To: <1548703299-15806-1-git-send-email-l.luba@partner.samsung.com>

This patch provides support for clocks needed for Dynamic Memory Controller
in Exynos5422 SoC. It adds CDREX base register addresses, new DIV, MUX and
GATE entries.

CC: Sylwester Nawrocki <s.nawrocki@samsung.com>
CC: Chanwoo Choi <cw00.choi@samsung.com>
CC: Michael Turquette <mturquette@baylibre.com>
CC: Stephen Boyd <sboyd@kernel.org>
CC: Kukjin Kim <kgene@kernel.org>
CC: Krzysztof Kozlowski <krzk@kernel.org>
CC: linux-samsung-soc@vger.kernel.org
CC: linux-clk@vger.kernel.org
CC: linux-arm-kernel@lists.infradead.org
CC: linux-kernel@vger.kernel.org
Signed-off-by: Lukasz Luba <l.luba@partner.samsung.com>
---
 drivers/clk/samsung/clk-exynos5420.c | 48 +++++++++++++++++++++++++++++++++---
 1 file changed, 44 insertions(+), 4 deletions(-)

diff --git a/drivers/clk/samsung/clk-exynos5420.c b/drivers/clk/samsung/clk-exynos5420.c
index 34cce3c..3e87421 100644
--- a/drivers/clk/samsung/clk-exynos5420.c
+++ b/drivers/clk/samsung/clk-exynos5420.c
@@ -132,6 +132,8 @@
 #define BPLL_LOCK		0x20010
 #define BPLL_CON0		0x20110
 #define SRC_CDREX		0x20200
+#define GATE_BUS_CDREX0		0x20700
+#define GATE_BUS_CDREX1		0x20704
 #define DIV_CDREX0		0x20500
 #define DIV_CDREX1		0x20504
 #define KPLL_LOCK		0x28000
@@ -248,6 +250,8 @@ static const unsigned long exynos5x_clk_regs[] __initconst = {
 	DIV_CDREX1,
 	SRC_KFC,
 	DIV_KFC0,
+	GATE_BUS_CDREX0,
+	GATE_BUS_CDREX1,
 };
 
 static const unsigned long exynos5800_clk_regs[] __initconst = {
@@ -425,6 +429,10 @@ PNAME(mout_group13_5800_p)	= { "dout_osc_div", "mout_sw_aclkfl1_550_cam" };
 PNAME(mout_group14_5800_p)	= { "dout_aclk550_cam", "dout_sclk_sw" };
 PNAME(mout_group15_5800_p)	= { "dout_osc_div", "mout_sw_aclk550_cam" };
 PNAME(mout_group16_5800_p)	= { "dout_osc_div", "mout_mau_epll_clk" };
+PNAME(mout_mx_mspll_ccore_phy_p) = { "sclk_bpll", "mout_dpll_ctrl",
+					"mout_mpll_ctrl", "ff_dout_spll2",
+					"mout_sclk_spll"};
+
 
 /* fixed rate clocks generated outside the soc */
 static struct samsung_fixed_rate_clock
@@ -450,7 +458,7 @@ static const struct samsung_fixed_factor_clock
 static const struct samsung_fixed_factor_clock
 		exynos5800_fixed_factor_clks[] __initconst = {
 	FFACTOR(0, "ff_dout_epll2", "mout_sclk_epll", 1, 2, 0),
-	FFACTOR(0, "ff_dout_spll2", "mout_sclk_spll", 1, 2, 0),
+	FFACTOR(CLK_FF_DOUT_SPLL2, "ff_dout_spll2", "mout_sclk_spll", 1, 2, 0),
 };
 
 static const struct samsung_mux_clock exynos5800_mux_clks[] __initconst = {
@@ -472,11 +480,14 @@ static const struct samsung_mux_clock exynos5800_mux_clks[] __initconst = {
 	MUX(0, "mout_aclk300_disp1", mout_group5_5800_p, SRC_TOP2, 24, 2),
 	MUX(0, "mout_aclk300_gscl", mout_group5_5800_p, SRC_TOP2, 28, 2),
 
+	MUX(CLK_MOUT_MX_MSPLL_CCORE_PHY, "mout_mx_mspll_ccore_phy",
+		mout_mx_mspll_ccore_phy_p, SRC_TOP7, 0, 3),
+
 	MUX(CLK_MOUT_MX_MSPLL_CCORE, "mout_mx_mspll_ccore",
-			mout_mx_mspll_ccore_p, SRC_TOP7, 16, 2),
+			mout_mx_mspll_ccore_p, SRC_TOP7, 16, 3),
 	MUX_F(CLK_MOUT_MAU_EPLL, "mout_mau_epll_clk", mout_mau_epll_clk_5800_p,
 			SRC_TOP7, 20, 2, CLK_SET_RATE_PARENT, 0),
-	MUX(0, "sclk_bpll", mout_bpll_p, SRC_TOP7, 24, 1),
+	MUX(CLK_SCLK_BPLL, "sclk_bpll", mout_bpll_p, SRC_TOP7, 24, 1),
 	MUX(0, "mout_epll2", mout_epll2_5800_p, SRC_TOP7, 28, 1),
 
 	MUX(0, "mout_aclk550_cam", mout_group3_5800_p, SRC_TOP8, 16, 3),
@@ -648,7 +659,7 @@ static const struct samsung_mux_clock exynos5x_mux_clks[] __initconst = {
 
 	MUX(0, "mout_sclk_mpll", mout_mpll_p, SRC_TOP6, 0, 1),
 	MUX(CLK_MOUT_VPLL, "mout_sclk_vpll", mout_vpll_p, SRC_TOP6, 4, 1),
-	MUX(0, "mout_sclk_spll", mout_spll_p, SRC_TOP6, 8, 1),
+	MUX(CLK_MOUT_SCLK_SPLL, "mout_sclk_spll", mout_spll_p, SRC_TOP6, 8, 1),
 	MUX(0, "mout_sclk_ipll", mout_ipll_p, SRC_TOP6, 12, 1),
 	MUX(0, "mout_sclk_rpll", mout_rpll_p, SRC_TOP6, 16, 1),
 	MUX_F(CLK_MOUT_EPLL, "mout_sclk_epll", mout_epll_p, SRC_TOP6, 20, 1,
@@ -814,9 +825,13 @@ static const struct samsung_div_clock exynos5x_div_clks[] __initconst = {
 			DIV_CDREX0, 16, 3),
 	DIV(CLK_DOUT_CCLK_DREX0, "dout_cclk_drex0", "dout_clk2x_phy0",
 			DIV_CDREX0, 8, 3),
+	DIV(0, "dout_cclk_drex1", "dout_clk2x_phy0", DIV_CDREX0, 8, 3),
 	DIV(CLK_DOUT_CLK2X_PHY0, "dout_clk2x_phy0", "dout_sclk_cdrex",
 			DIV_CDREX0, 3, 5),
 
+	DIV(0, "dout_pclk_drex0", "dout_cclk_drex0", DIV_CDREX0, 28, 3),
+	DIV(0, "dout_pclk_drex1", "dout_cclk_drex1", DIV_CDREX0, 28, 3),
+
 	DIV(CLK_DOUT_PCLK_CORE_MEM, "dout_pclk_core_mem", "mout_mclk_cdrex",
 			DIV_CDREX1, 8, 3),
 
@@ -1170,6 +1185,31 @@ static const struct samsung_gate_clock exynos5x_gate_clks[] __initconst = {
 			GATE_TOP_SCLK_ISP, 12, CLK_SET_RATE_PARENT, 0),
 
 	GATE(CLK_G3D, "g3d", "mout_user_aclk_g3d", GATE_IP_G3D, 9, 0, 0),
+
+	GATE(CLK_CLKM_PHY0, "clkm_phy0", "dout_sclk_cdrex",
+			GATE_BUS_CDREX0, 0, 0, 0),
+	GATE(CLK_CLKM_PHY1, "clkm_phy1", "dout_sclk_cdrex",
+			GATE_BUS_CDREX0, 1, 0, 0),
+	GATE(0, "mx_mspll_ccore_phy", "mout_mx_mspll_ccore_phy",
+			SRC_MASK_TOP7, 0, CLK_IGNORE_UNUSED, 0),
+
+	GATE(CLK_ACLK_PPMU_DREX0_0, "aclk_ppmu_drex0_0", "dout_aclk_cdrex1",
+			GATE_BUS_CDREX1, 15, CLK_IGNORE_UNUSED, 0),
+	GATE(CLK_ACLK_PPMU_DREX0_1, "aclk_ppmu_drex0_1", "dout_aclk_cdrex1",
+			GATE_BUS_CDREX1, 14, CLK_IGNORE_UNUSED, 0),
+	GATE(CLK_ACLK_PPMU_DREX1_0, "aclk_ppmu_drex1_0", "dout_aclk_cdrex1",
+			GATE_BUS_CDREX1, 13, CLK_IGNORE_UNUSED, 0),
+	GATE(CLK_ACLK_PPMU_DREX1_1, "aclk_ppmu_drex1_1", "dout_aclk_cdrex1",
+			GATE_BUS_CDREX1, 12, CLK_IGNORE_UNUSED, 0),
+
+	GATE(CLK_PCLK_PPMU_DREX0_0, "pclk_ppmu_drex0_0", "dout_pclk_cdrex",
+			GATE_BUS_CDREX1, 29, CLK_IGNORE_UNUSED, 0),
+	GATE(CLK_PCLK_PPMU_DREX0_1, "pclk_ppmu_drex0_1", "dout_pclk_cdrex",
+			GATE_BUS_CDREX1, 28, CLK_IGNORE_UNUSED, 0),
+	GATE(CLK_PCLK_PPMU_DREX1_0, "pclk_ppmu_drex1_0", "dout_pclk_cdrex",
+			GATE_BUS_CDREX1, 27, CLK_IGNORE_UNUSED, 0),
+	GATE(CLK_PCLK_PPMU_DREX1_1, "pclk_ppmu_drex1_1", "dout_pclk_cdrex",
+			GATE_BUS_CDREX1, 26, CLK_IGNORE_UNUSED, 0),
 };
 
 static const struct samsung_div_clock exynos5x_disp_div_clks[] __initconst = {
-- 
2.7.4


  parent reply	other threads:[~2019-01-28 19:22 UTC|newest]

Thread overview: 18+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
     [not found] <1548703299-15806-1-git-send-email-l.luba@partner.samsung.com>
     [not found] ` <CGME20190128192151eucas1p1754d1286ff0f46e8e98796d7583d8e96@eucas1p1.samsung.com>
2019-01-28 19:21   ` [PATCH 1/8] clk: samsung: add needed IDs for DMC clocks in Exynos5420 Lukasz Luba
2019-01-29  0:54     ` Chanwoo Choi
2019-01-29 15:57       ` Lukasz Luba
     [not found] ` <CGME20190128192151eucas1p1d5ad3a851ffc8b56a7a62febdb6d5677@eucas1p1.samsung.com>
2019-01-28 19:21   ` Lukasz Luba [this message]
     [not found] ` <CGME20190128192152eucas1p118c23cce7c1f6d9a961cba8ae8304318@eucas1p1.samsung.com>
2019-01-28 19:21   ` [PATCH 3/8] clk: samsung: add BPLL rate table for Exynos 5422 SoC Lukasz Luba
     [not found] ` <CGME20190128192153eucas1p2d7a796cb89e68c1789069562e91296be@eucas1p2.samsung.com>
2019-01-28 19:21   ` [PATCH 4/8] dt-bindings: devfreq: add DMC device description Lukasz Luba
2019-01-29 14:47     ` Krzysztof Kozlowski
2019-01-29 16:02       ` Lukasz Luba
2019-02-25 13:49         ` Rob Herring
     [not found] ` <CGME20190128192153eucas1p14ea8461ed8f9d94955f2ff4fb3c4c790@eucas1p1.samsung.com>
2019-01-28 19:21   ` [PATCH 5/8] drivers: devfreq: exynos5: add DMC driver Lukasz Luba
2019-01-29 15:03     ` Krzysztof Kozlowski
2019-01-29 16:24       ` Lukasz Luba
     [not found] ` <CGME20190128192154eucas1p2e696de47c5aab0cdb80cff32254daaf9@eucas1p2.samsung.com>
2019-01-28 19:21   ` [PATCH 6/8] DT: arm: exynos: add DMC device for exynos5422 Lukasz Luba
2019-01-29 15:13     ` Krzysztof Kozlowski
2019-01-29 17:06       ` Lukasz Luba
     [not found] ` <CGME20190128192154eucas1p2719b339d9dd0d11468fd8e8ab171e84e@eucas1p2.samsung.com>
2019-01-28 19:21   ` [PATCH 7/8] drivers: devfreq: events: add Exynos PPMU new events Lukasz Luba
     [not found] ` <CGME20190128192155eucas1p13fa8616c0da161cd2f041ba241dba3d5@eucas1p1.samsung.com>
2019-01-28 19:21   ` [PATCH 8/8] arm: config: exynos: enable DMC driver Lukasz Luba
2019-01-29 15:15     ` Krzysztof Kozlowski

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1548703299-15806-3-git-send-email-l.luba@partner.samsung.com \
    --to=l.luba@partner.samsung.com \
    --cc=b.zolnierkie@samsung.com \
    --cc=cw00.choi@samsung.com \
    --cc=devicetree@vger.kernel.org \
    --cc=kgene@kernel.org \
    --cc=krzk@kernel.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-clk@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-samsung-soc@vger.kernel.org \
    --cc=mturquette@baylibre.com \
    --cc=myungjoo.ham@samsung.com \
    --cc=s.nawrocki@samsung.com \
    --cc=sboyd@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).