From: Jagan Teki <jagan@amarulasolutions.com>
To: Maxime Ripard <maxime.ripard@bootlin.com>,
David Airlie <airlied@linux.ie>, Daniel Vetter <daniel@ffwll.ch>,
Chen-Yu Tsai <wens@csie.org>,
Michael Turquette <mturquette@baylibre.com>,
Rob Herring <robh+dt@kernel.org>,
Mark Rutland <mark.rutland@arm.com>
Cc: linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org, linux-clk@vger.kernel.org,
dri-devel@lists.freedesktop.org, devicetree@vger.kernel.org,
Michael Trimarchi <michael@amarulasolutions.com>,
linux-amarula@amarulasolutions.com, linux-sunxi@googlegroups.com,
Jagan Teki <jagan@amarulasolutions.com>
Subject: [PATCH v7 22/23] drm/sun4i: sun6i_mipi_dsi: Fix DSI hfp timing value
Date: Fri, 1 Feb 2019 21:12:31 +0530 [thread overview]
Message-ID: <20190201154232.10505-23-jagan@amarulasolutions.com> (raw)
In-Reply-To: <20190201154232.10505-1-jagan@amarulasolutions.com>
Current driver is calculating hfp maximum value by subtracting
htotal with hsync_end which is front back value, but the
hpp refers to front porch.
Front porch value is calculating by subtracting hsync_start with
hdisplay as per drm_mode timings, and BSP code from BPI-M64-bsp
is eventually following the same.
BPI-M64-bsp is computing hfp as (from linux-sunxi/
drivers/video/sunxi/disp2/disp/de/lowlevel_sun50iw1/de_dsi.c)
dsi_hbp = (hbp-hspw)*dsi_pixel_bits[format]/8 - (4+2);
dsi_hact = x * dsi_pixel_bits[format]/8;
dsi_hblk = (ht-hspw)*dsi_pixel_bits[format]/8-(4+4+2);
dsi_hfp = dsi_hblk - (4+dsi_hact+2) - (4+dsi_hbp+2);
Example,
u32 fmt = dsi_pixel_bits[format]/8;
=> ((ht-hspw)*fmt - 10) - (6 + x * fmt) - (6 + (hbp-hspw)*fmt - 6)
=> (ht - hspw - x - (hbp - hspw)) * fmt - 16
=> (ht - x - hbp) * fmt - 16
=> (ht - x - (timmings->hor_total_time - timmings->hor_front_porch - x)
* fmt - 16
=> (timmings->hor_total_time - x - timmings->hor_total_time +
timmings->hor_front_porch + x) * fmt - 16
=> timmings->hor_front_porch * fmt - 16
So, update the DSI hfp timing accordingly.
Tested on 2-lane, 4-lane MIPI-DSI LCD panels.
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Tested-by: Merlijn Wajer <merlijn@wizzup.org>
---
drivers/gpu/drm/sun4i/sun6i_mipi_dsi.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/drivers/gpu/drm/sun4i/sun6i_mipi_dsi.c b/drivers/gpu/drm/sun4i/sun6i_mipi_dsi.c
index 780b1906c661..3fbe2132eb6a 100644
--- a/drivers/gpu/drm/sun4i/sun6i_mipi_dsi.c
+++ b/drivers/gpu/drm/sun4i/sun6i_mipi_dsi.c
@@ -587,7 +587,8 @@ static void sun6i_dsi_setup_timings(struct sun6i_dsi *dsi,
*/
#define HFP_PACKET_OVERHEAD 6
hfp = max((unsigned int)HFP_PACKET_OVERHEAD,
- (mode->htotal - mode->hsync_end) * Bpp - HFP_PACKET_OVERHEAD);
+ (mode->hsync_start - mode->hdisplay) * Bpp -
+ HFP_PACKET_OVERHEAD);
/*
* hblk seems to be the line + porches length.
--
2.18.0.321.gffc6fa0e3
next prev parent reply other threads:[~2019-02-01 15:43 UTC|newest]
Thread overview: 30+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-02-01 15:42 [PATCH v7 00/23] drm/sun4i: Allwinner A64 MIPI-DSI support Jagan Teki
2019-02-01 15:42 ` [PATCH v7 01/23] drm/sun4i: sun6i_mipi_dsi: Compute burst mode loop N1 instruction delay Jagan Teki
2019-02-01 15:42 ` [PATCH v7 02/23] drm/sun4i: sun6i_mipi_dsi: Support instruction loop selection Jagan Teki
2019-02-01 15:42 ` [PATCH v7 03/23] drm/sun4i: sun6i_mipi_dsi: Setup burst mode timings Jagan Teki
2019-02-01 15:42 ` [PATCH v7 04/23] drm/sun4i: sun6i_mipi_dsi: Simplify drq to support all modes Jagan Teki
2019-02-01 15:42 ` [PATCH v7 05/23] drm/sun4i: tcon: Export get tcon0 routine Jagan Teki
2019-02-01 15:42 ` [PATCH v7 06/23] drm/sun4i: sun6i_mipi_dsi: Probe tcon0 during dsi_bind Jagan Teki
2019-02-01 15:42 ` [PATCH v7 07/23] drm/sun4i: sun6i_mipi_dsi: Setup burst mode Jagan Teki
2019-02-01 15:42 ` [PATCH v7 08/23] drm/sun4i: sun6i_mipi_dsi: Enable trail_inv and trail_fill controls Jagan Teki
2019-02-01 15:42 ` [PATCH v7 09/23] drm/sun4i: sun6i_mipi_dsi: Enable HBP, HSA_HSE for burst mode Jagan Teki
2019-02-01 15:42 ` [PATCH v7 10/23] drm/sun4i: tcon: Compute DCLK dividers based on format, lanes Jagan Teki
2019-02-01 15:42 ` [PATCH v7 11/23] dt-bindings: sun6i-dsi: Add VCC-DSI supply property Jagan Teki
2019-02-01 15:42 ` [PATCH v7 12/23] drm/sun4i: sun6i_mipi_dsi: Add support for VCC-DSI voltage regulator Jagan Teki
2019-02-01 15:42 ` [PATCH v7 13/23] dt-bindings: sun6i-dsi: Add A64 MIPI-DSI compatible Jagan Teki
2019-02-01 15:42 ` [PATCH v7 14/23] dt-bindings: sun6i-dsi: Add A64 DPHY compatible (w/ A31 fallback) Jagan Teki
2019-02-01 15:42 ` [PATCH v7 15/23] drm/sun4i: sun6i_mipi_dsi: Add has_mod_clk quirk Jagan Teki
2019-02-01 15:42 ` [PATCH v7 16/23] drm/sun4i: sun6i_mipi_dsi: Add Allwinner A64 MIPI DSI support Jagan Teki
2019-02-01 15:42 ` [PATCH v7 17/23] arm64: dts: allwinner: a64: Add MIPI DSI pipeline Jagan Teki
2019-02-01 15:42 ` [DO NOT MERGE][PATCH v7 18/23] arm64: allwinner: a64: pine64-lts: Enable Feiyang FY07024DI26A30-D DSI panel Jagan Teki
2019-02-01 15:42 ` [PATCH v7 19/23] drm/sun4i: sun6i_mipi_dsi: Add DSI Generic short write 2 param transfer Jagan Teki
2019-02-01 15:42 ` [DO NOT MERGE][PATCH v7 20/23] arm64: dts: allwinner: bananapi-m64: Bananapi S070WV20-CT16 DSI panel Jagan Teki
2019-02-01 15:42 ` [PATCH v7 21/23] drm/sun4i: sun6i_mipi_dsi: Fix DSI hbp timing value Jagan Teki
2019-02-01 15:42 ` Jagan Teki [this message]
2019-02-01 15:42 ` [PATCH v7 23/23] arm64: dts: allwinner: a64-amarula-relic: Add Techstar TS8550B MIPI-DSI panel Jagan Teki
2019-02-01 15:48 ` [PATCH v7 00/23] drm/sun4i: Allwinner A64 MIPI-DSI support Maxime Ripard
2019-02-01 15:51 ` Jagan Teki
2019-02-12 9:46 ` Jagan Teki
2019-02-13 9:03 ` Maxime Ripard
2019-02-13 9:19 ` Jagan Teki
2019-02-14 16:41 ` Jagan Teki
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190201154232.10505-23-jagan@amarulasolutions.com \
--to=jagan@amarulasolutions.com \
--cc=airlied@linux.ie \
--cc=daniel@ffwll.ch \
--cc=devicetree@vger.kernel.org \
--cc=dri-devel@lists.freedesktop.org \
--cc=linux-amarula@amarulasolutions.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-clk@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-sunxi@googlegroups.com \
--cc=mark.rutland@arm.com \
--cc=maxime.ripard@bootlin.com \
--cc=michael@amarulasolutions.com \
--cc=mturquette@baylibre.com \
--cc=robh+dt@kernel.org \
--cc=wens@csie.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).