From: "Chang S. Bae" <chang.seok.bae@intel.com>
To: Andy Lutomirski <luto@kernel.org>,
Thomas Gleixner <tglx@linutronix.de>,
Ingo Molnar <mingo@kernel.org>, "H . Peter Anvin" <hpa@zytor.com>,
Andi Kleen <ak@linux.intel.com>
Cc: Markus T Metzger <markus.t.metzger@intel.com>,
Ravi Shankar <ravi.v.shankar@intel.com>,
"Chang S . Bae" <chang.seok.bae@intel.com>,
LKML <linux-kernel@vger.kernel.org>
Subject: [PATCH v5 04/13] x86/fsgsbase/64: Add intrinsics for FSGSBASE instructions
Date: Fri, 1 Feb 2019 12:53:09 -0800 [thread overview]
Message-ID: <20190201205319.15995-5-chang.seok.bae@intel.com> (raw)
In-Reply-To: <20190201205319.15995-1-chang.seok.bae@intel.com>
From: Andi Kleen <ak@linux.intel.com>
Add C intrinsics and assembler macros for the new FSBASE and GSBASE
instructions.
Very straight forward. Used in followon patches.
[ luto: Rename the variables from FS and GS to FSBASE and GSBASE and
make <asm/fsgsbase.h> safe to include on 32-bit kernels. ]
v2: Use __always_inline
[ chang: Revise the changelog. Place them in <asm/fsgsbase.h>. Replace
the macros with GAS-compatible ones. ]
If GCC supports it, we can add -mfsgsbase to CFLAGS and use the builtins
here for extra performance.
[ chang: Use FSGSBASE instructions directly. Removed GAS-compatible
macros as the minimum required binutils (v2.21) supports the FSGSBASE
instructions. ]
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Andy Lutomirski <luto@kernel.org>
Signed-off-by: Chang S. Bae <chang.seok.bae@intel.com>
Reviewed-by: Andy Lutomirski <luto@kernel.org>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@kernel.org>
---
arch/x86/include/asm/fsgsbase.h | 30 ++++++++++++++++++++++++++++++
1 file changed, 30 insertions(+)
diff --git a/arch/x86/include/asm/fsgsbase.h b/arch/x86/include/asm/fsgsbase.h
index bca4c743de77..fdd1177499b4 100644
--- a/arch/x86/include/asm/fsgsbase.h
+++ b/arch/x86/include/asm/fsgsbase.h
@@ -19,6 +19,36 @@ extern unsigned long x86_gsbase_read_task(struct task_struct *task);
extern void x86_fsbase_write_task(struct task_struct *task, unsigned long fsbase);
extern void x86_gsbase_write_task(struct task_struct *task, unsigned long gsbase);
+/* Must be protected by X86_FEATURE_FSGSBASE check. */
+
+static __always_inline unsigned long rdfsbase(void)
+{
+ unsigned long fsbase;
+
+ asm volatile("rdfsbase %0" : "=r" (fsbase) :: "memory");
+
+ return fsbase;
+}
+
+static __always_inline unsigned long rdgsbase(void)
+{
+ unsigned long gsbase;
+
+ asm volatile("rdgsbase %0" : "=r" (gsbase) :: "memory");
+
+ return gsbase;
+}
+
+static __always_inline void wrfsbase(unsigned long fsbase)
+{
+ asm volatile("wrfsbase %0" :: "r" (fsbase) : "memory");
+}
+
+static __always_inline void wrgsbase(unsigned long gsbase)
+{
+ asm volatile("wrgsbase %0" :: "r" (gsbase) : "memory");
+}
+
/* Helper functions for reading/writing FS/GS base */
static inline unsigned long x86_fsbase_read_cpu(void)
--
2.19.1
next prev parent reply other threads:[~2019-02-01 20:54 UTC|newest]
Thread overview: 29+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-02-01 20:53 [PATCH v5 00/13] x86: Enable FSGSBASE instructions Chang S. Bae
2019-02-01 20:53 ` [PATCH v5 01/13] taint: Introduce a new taint flag (insecure) Chang S. Bae
2019-02-02 2:42 ` Andy Lutomirski
2019-02-05 21:21 ` Andrew Morton
2019-02-05 22:46 ` Randy Dunlap
2019-02-05 23:07 ` hpa
2019-02-01 20:53 ` [PATCH v5 02/13] x86/fsgsbase/64: Add 'unsafe_fsgsbase' to enable CR4.FSGSBASE Chang S. Bae
2019-02-01 20:53 ` [PATCH v5 03/13] kbuild: Raise the minimum required binutils version to 2.21 Chang S. Bae
2019-02-02 2:45 ` Andy Lutomirski
2019-02-05 0:08 ` Andrew Morton
2019-02-01 20:53 ` Chang S. Bae [this message]
2019-02-02 2:52 ` [PATCH v5 04/13] x86/fsgsbase/64: Add intrinsics for FSGSBASE instructions Andy Lutomirski
2019-02-01 20:53 ` [PATCH v5 04/13] x86/fsgsbase/64: Add intrinsics/macros " Chang S. Bae
2019-02-01 20:53 ` [PATCH v5 05/13] x86/fsgsbase/64: Enable FSGSBASE instructions in the helper functions Chang S. Bae
2019-02-02 2:57 ` Andy Lutomirski
2019-02-01 20:53 ` [PATCH v5 06/13] x86/fsgsbase/64: Preserve FS/GS state in __switch_to() if FSGSBASE is on Chang S. Bae
2019-02-01 20:53 ` [PATCH v5 07/13] x86/fsgsbase/64: When copying a thread, use the FSGSBASE instructions if available Chang S. Bae
2019-02-02 17:28 ` Andy Lutomirski
2019-02-01 20:53 ` [PATCH v5 08/13] x86/fsgsbase/64: Introduce the FIND_PERCPU_BASE macro Chang S. Bae
2019-02-02 17:17 ` Andy Lutomirski
2019-02-13 18:46 ` Bae, Chang Seok
2019-02-01 20:53 ` [PATCH v5 09/13] x86/fsgsbase/64: Use the per-CPU base as GSBASE at the paranoid_entry Chang S. Bae
2019-02-01 20:53 ` [PATCH v5 10/13] selftests/x86/fsgsbase: Test WRGSBASE Chang S. Bae
2019-02-01 20:53 ` [PATCH v5 11/13] x86/fsgsbase/64: Enable FSGSBASE by default and add a chicken bit Chang S. Bae
2019-02-01 20:53 ` [PATCH v5 12/13] x86/elf: Enumerate kernel FSGSBASE capability in AT_HWCAP2 Chang S. Bae
2019-02-01 20:53 ` [PATCH v5 13/13] x86/fsgsbase/64: Add documentation for FSGSBASE Chang S. Bae
2019-02-01 23:02 ` [PATCH v5 00/13] x86: Enable FSGSBASE instructions Andi Kleen
2019-02-02 2:43 ` Andy Lutomirski
2019-02-05 6:26 ` hpa
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190201205319.15995-5-chang.seok.bae@intel.com \
--to=chang.seok.bae@intel.com \
--cc=ak@linux.intel.com \
--cc=hpa@zytor.com \
--cc=linux-kernel@vger.kernel.org \
--cc=luto@kernel.org \
--cc=markus.t.metzger@intel.com \
--cc=mingo@kernel.org \
--cc=ravi.v.shankar@intel.com \
--cc=tglx@linutronix.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).