From: Christoph Hellwig <hch@lst.de>
To: Benjamin Herrenschmidt <benh@kernel.crashing.org>,
Paul Mackerras <paulus@samba.org>,
Michael Ellerman <mpe@ellerman.id.au>,
Olof Johansson <olof@lixom.net>
Cc: linuxppc-dev@lists.ozlabs.org, iommu@lists.linux-foundation.org,
linux-kernel@vger.kernel.org,
Christian Zigotzky <chzigotzky@xenosoft.de>
Subject: [PATCH 19/32] powerpc/dma: remove max_direct_dma_addr
Date: Wed, 13 Feb 2019 08:01:20 +0100 [thread overview]
Message-ID: <20190213070133.11259-20-hch@lst.de> (raw)
In-Reply-To: <20190213070133.11259-1-hch@lst.de>
The max_direct_dma_addr duplicates the bus_dma_mask field in struct
device. Use the generic field instead.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Tested-by: Christian Zigotzky <chzigotzky@xenosoft.de>
---
arch/powerpc/include/asm/device.h | 3 ---
arch/powerpc/include/asm/dma-direct.h | 4 +---
arch/powerpc/kernel/dma-swiotlb.c | 21 +--------------------
arch/powerpc/kernel/dma.c | 5 ++---
arch/powerpc/sysdev/fsl_pci.c | 4 ++--
5 files changed, 6 insertions(+), 31 deletions(-)
diff --git a/arch/powerpc/include/asm/device.h b/arch/powerpc/include/asm/device.h
index 3814e1c2d4bc..a130be13ee83 100644
--- a/arch/powerpc/include/asm/device.h
+++ b/arch/powerpc/include/asm/device.h
@@ -38,9 +38,6 @@ struct dev_archdata {
#ifdef CONFIG_IOMMU_API
void *iommu_domain;
#endif
-#ifdef CONFIG_SWIOTLB
- dma_addr_t max_direct_dma_addr;
-#endif
#ifdef CONFIG_PPC64
struct pci_dn *pci_data;
#endif
diff --git a/arch/powerpc/include/asm/dma-direct.h b/arch/powerpc/include/asm/dma-direct.h
index 7702875aabb7..e00ab5d0612d 100644
--- a/arch/powerpc/include/asm/dma-direct.h
+++ b/arch/powerpc/include/asm/dma-direct.h
@@ -5,9 +5,7 @@
static inline bool dma_capable(struct device *dev, dma_addr_t addr, size_t size)
{
#ifdef CONFIG_SWIOTLB
- struct dev_archdata *sd = &dev->archdata;
-
- if (sd->max_direct_dma_addr && addr + size > sd->max_direct_dma_addr)
+ if (dev->bus_dma_mask && addr + size > dev->bus_dma_mask)
return false;
#endif
diff --git a/arch/powerpc/kernel/dma-swiotlb.c b/arch/powerpc/kernel/dma-swiotlb.c
index 42badc4bf536..0e21c318300e 100644
--- a/arch/powerpc/kernel/dma-swiotlb.c
+++ b/arch/powerpc/kernel/dma-swiotlb.c
@@ -24,21 +24,6 @@
unsigned int ppc_swiotlb_enable;
-static u64 swiotlb_powerpc_get_required(struct device *dev)
-{
- u64 end, mask, max_direct_dma_addr = dev->archdata.max_direct_dma_addr;
-
- end = memblock_end_of_DRAM();
- if (max_direct_dma_addr && end > max_direct_dma_addr)
- end = max_direct_dma_addr;
- end += get_dma_offset(dev);
-
- mask = 1ULL << (fls64(end) - 1);
- mask += mask - 1;
-
- return mask;
-}
-
/*
* At the moment, all platforms that use this code only require
* swiotlb to be used if we're operating on HIGHMEM. Since
@@ -59,22 +44,18 @@ const struct dma_map_ops powerpc_swiotlb_dma_ops = {
.sync_single_for_device = dma_direct_sync_single_for_device,
.sync_sg_for_cpu = dma_direct_sync_sg_for_cpu,
.sync_sg_for_device = dma_direct_sync_sg_for_device,
- .get_required_mask = swiotlb_powerpc_get_required,
+ .get_required_mask = dma_direct_get_required_mask,
};
static int ppc_swiotlb_bus_notify(struct notifier_block *nb,
unsigned long action, void *data)
{
struct device *dev = data;
- struct dev_archdata *sd;
/* We are only intereted in device addition */
if (action != BUS_NOTIFY_ADD_DEVICE)
return 0;
- sd = &dev->archdata;
- sd->max_direct_dma_addr = 0;
-
/* May need to bounce if the device can't address all of DRAM */
if ((dma_get_mask(dev) + 1) < memblock_end_of_DRAM())
set_dma_ops(dev, &powerpc_swiotlb_dma_ops);
diff --git a/arch/powerpc/kernel/dma.c b/arch/powerpc/kernel/dma.c
index 9def69c8f602..1e191eb3f0ec 100644
--- a/arch/powerpc/kernel/dma.c
+++ b/arch/powerpc/kernel/dma.c
@@ -30,11 +30,10 @@
static u64 __maybe_unused get_pfn_limit(struct device *dev)
{
u64 pfn = (dev->coherent_dma_mask >> PAGE_SHIFT) + 1;
- struct dev_archdata __maybe_unused *sd = &dev->archdata;
#ifdef CONFIG_SWIOTLB
- if (sd->max_direct_dma_addr && dev->dma_ops == &powerpc_swiotlb_dma_ops)
- pfn = min_t(u64, pfn, sd->max_direct_dma_addr >> PAGE_SHIFT);
+ if (dev->bus_dma_mask && dev->dma_ops == &powerpc_swiotlb_dma_ops)
+ pfn = min_t(u64, pfn, dev->bus_dma_mask >> PAGE_SHIFT);
#endif
return pfn;
diff --git a/arch/powerpc/sysdev/fsl_pci.c b/arch/powerpc/sysdev/fsl_pci.c
index 561f97d698cc..b710cee023a2 100644
--- a/arch/powerpc/sysdev/fsl_pci.c
+++ b/arch/powerpc/sysdev/fsl_pci.c
@@ -117,9 +117,8 @@ static u64 pci64_dma_offset;
static void pci_dma_dev_setup_swiotlb(struct pci_dev *pdev)
{
struct pci_controller *hose = pci_bus_to_host(pdev->bus);
- struct dev_archdata *sd = &pdev->dev.archdata;
- sd->max_direct_dma_addr =
+ pdev->dev.bus_dma_mask =
hose->dma_window_base_cur + hose->dma_window_size;
}
@@ -144,6 +143,7 @@ static int fsl_pci_dma_set_mask(struct device *dev, u64 dma_mask)
* mapping that allows addressing any RAM address from across PCI.
*/
if (dev_is_pci(dev) && dma_mask >= pci64_dma_offset * 2 - 1) {
+ dev->bus_dma_mask = 0;
set_dma_ops(dev, &dma_nommu_ops);
set_dma_offset(dev, pci64_dma_offset);
}
--
2.20.1
next prev parent reply other threads:[~2019-02-13 7:02 UTC|newest]
Thread overview: 35+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-02-13 7:01 use generic DMA mapping code in powerpc V7 Christoph Hellwig
2019-02-13 7:01 ` [PATCH 01/32] net: pasemi: set a 64-bit DMA mask on the DMA device Christoph Hellwig
2019-02-22 9:47 ` [01/32] " Michael Ellerman
2019-02-13 7:01 ` [PATCH 02/32] dma-direct: we might need GFP_DMA for 32-bit dma masks Christoph Hellwig
2019-02-13 7:01 ` [PATCH 03/32] powerpc/dma: untangle vio_dma_mapping_ops from dma_iommu_ops Christoph Hellwig
2019-02-13 7:01 ` [PATCH 04/32] powerpc/dma: handle iommu bypass in dma_iommu_ops Christoph Hellwig
2019-02-13 7:01 ` [PATCH 05/32] powerpc/pseries: unwind dma_get_required_mask_pSeriesLP a bit Christoph Hellwig
2019-02-13 7:01 ` [PATCH 06/32] powerpc/pseries: use the generic iommu bypass code Christoph Hellwig
2019-02-13 7:01 ` [PATCH 07/32] powerpc/cell: move dma direct window setup out of dma_configure Christoph Hellwig
2019-02-13 7:01 ` [PATCH 08/32] powerpc/cell: use the generic iommu bypass code Christoph Hellwig
2019-02-13 7:01 ` [PATCH 09/32] powerpc/dart: remove dead cleanup code in iommu_init_early_dart Christoph Hellwig
2019-02-13 7:01 ` [PATCH 10/32] powerpc/dart: use the generic iommu bypass code Christoph Hellwig
2019-02-13 7:01 ` [PATCH 11/32] powerpc/powernv: remove pnv_pci_ioda_pe_single_vendor Christoph Hellwig
2019-02-13 7:01 ` [PATCH 12/32] powerpc/powernv: remove pnv_npu_dma_set_mask Christoph Hellwig
2019-02-13 7:01 ` [PATCH 13/32] powerpc/powernv: use the generic iommu bypass code Christoph Hellwig
2019-02-13 7:01 ` [PATCH 14/32] powerpc/dma: stop overriding dma_get_required_mask Christoph Hellwig
2019-02-13 7:01 ` [PATCH 15/32] powerpc/pci: remove the dma_set_mask pci_controller ops methods Christoph Hellwig
2019-02-13 7:01 ` [PATCH 16/32] powerpc/dma: remove the iommu fallback for coherent allocations Christoph Hellwig
2019-02-13 7:01 ` [PATCH 17/32] powerpc/dma: remove get_pci_dma_ops Christoph Hellwig
2019-02-13 7:01 ` [PATCH 18/32] powerpc/dma: move pci_dma_dev_setup_swiotlb to fsl_pci.c Christoph Hellwig
2019-02-13 7:01 ` Christoph Hellwig [this message]
2019-02-13 7:01 ` [PATCH 20/32] powerpc/dma: fix an off-by-one in dma_capable Christoph Hellwig
2019-02-13 7:01 ` [PATCH 21/32] dma-mapping, powerpc: simplify the arch dma_set_mask override Christoph Hellwig
2019-02-13 7:01 ` [PATCH 22/32] powerpc/dma: use phys_to_dma instead of get_dma_offset Christoph Hellwig
2019-02-13 7:01 ` [PATCH 23/32] powerpc/dma: remove dma_nommu_mmap_coherent Christoph Hellwig
2019-02-13 7:01 ` [PATCH 24/32] powerpc/dma: remove dma_nommu_get_required_mask Christoph Hellwig
2019-02-13 7:01 ` [PATCH 25/32] powerpc/dma: remove dma_nommu_dma_supported Christoph Hellwig
2019-02-13 7:01 ` [PATCH 26/32] swiotlb: remove swiotlb_dma_supported Christoph Hellwig
2019-02-13 7:01 ` [PATCH 27/32] powerpc/dma: use the dma-direct allocator for coherent platforms Christoph Hellwig
2019-02-13 7:01 ` [PATCH 28/32] powerpc/dma: use the dma_direct mapping routines Christoph Hellwig
2019-02-13 7:01 ` [PATCH 29/32] powerpc/dma: use the generic direct mapping bypass Christoph Hellwig
2019-02-13 7:01 ` [PATCH 30/32] powerpc/dma: remove get_dma_offset Christoph Hellwig
2019-02-13 7:01 ` [PATCH 31/32] powerpc/dma: remove set_dma_offset Christoph Hellwig
2019-02-13 7:01 ` [PATCH 32/32] powerpc/dma: trim the fat from <asm/dma-mapping.h> Christoph Hellwig
2019-02-20 14:23 ` use generic DMA mapping code in powerpc V7 Christoph Hellwig
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190213070133.11259-20-hch@lst.de \
--to=hch@lst.de \
--cc=benh@kernel.crashing.org \
--cc=chzigotzky@xenosoft.de \
--cc=iommu@lists.linux-foundation.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linuxppc-dev@lists.ozlabs.org \
--cc=mpe@ellerman.id.au \
--cc=olof@lixom.net \
--cc=paulus@samba.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).