From: Jose Abreu <jose.abreu@synopsys.com>
To: netdev@vger.kernel.org, linux-kernel@vger.kernel.org
Cc: Jose Abreu <jose.abreu@synopsys.com>,
Joao Pinto <joao.pinto@synopsys.com>,
"David S . Miller" <davem@davemloft.net>,
Giuseppe Cavallaro <peppe.cavallaro@st.com>,
Alexandre Torgue <alexandre.torgue@st.com>
Subject: [PATCH net-next 3/3] net: stmmac: dwxgmac2: Also use TBU interrupt to clean TX path
Date: Fri, 15 Feb 2019 14:42:07 +0100 [thread overview]
Message-ID: <3fd9188875c502aeff3648be199289009bcf9055.1550237884.git.joabreu@synopsys.com> (raw)
In-Reply-To: <cover.1550237884.git.joabreu@synopsys.com>
In-Reply-To: <cover.1550237884.git.joabreu@synopsys.com>
TBU interrupt is a normal interrupt and can be used to trigger the
cleaning of TX path. Lets check if it's active in DMA interrupt handler.
While at it, refactor a little bit the function:
- Don't check if RI is enabled because at function exit we will
only clear the interrupts that are enabled so, no event will
be missed.
In my tests withe XGMAC2 this increased performance.
Signed-off-by: Jose Abreu <joabreu@synopsys.com>
Cc: Joao Pinto <jpinto@synopsys.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Giuseppe Cavallaro <peppe.cavallaro@st.com>
Cc: Alexandre Torgue <alexandre.torgue@st.com>
---
drivers/net/ethernet/stmicro/stmmac/dwxgmac2.h | 4 +++-
drivers/net/ethernet/stmicro/stmmac/dwxgmac2_dma.c | 8 +++-----
2 files changed, 6 insertions(+), 6 deletions(-)
diff --git a/drivers/net/ethernet/stmicro/stmmac/dwxgmac2.h b/drivers/net/ethernet/stmicro/stmmac/dwxgmac2.h
index d6bb953685fa..37d5e6fe7473 100644
--- a/drivers/net/ethernet/stmicro/stmmac/dwxgmac2.h
+++ b/drivers/net/ethernet/stmicro/stmmac/dwxgmac2.h
@@ -193,9 +193,10 @@
#define XGMAC_AIE BIT(14)
#define XGMAC_RBUE BIT(7)
#define XGMAC_RIE BIT(6)
+#define XGMAC_TBUE BIT(2)
#define XGMAC_TIE BIT(0)
#define XGMAC_DMA_INT_DEFAULT_EN (XGMAC_NIE | XGMAC_AIE | XGMAC_RBUE | \
- XGMAC_RIE | XGMAC_TIE)
+ XGMAC_RIE | XGMAC_TBUE | XGMAC_TIE)
#define XGMAC_DMA_CH_Rx_WATCHDOG(x) (0x0000313c + (0x80 * (x)))
#define XGMAC_RWT GENMASK(7, 0)
#define XGMAC_DMA_CH_STATUS(x) (0x00003160 + (0x80 * (x)))
@@ -204,6 +205,7 @@
#define XGMAC_FBE BIT(12)
#define XGMAC_RBU BIT(7)
#define XGMAC_RI BIT(6)
+#define XGMAC_TBU BIT(2)
#define XGMAC_TPS BIT(1)
#define XGMAC_TI BIT(0)
diff --git a/drivers/net/ethernet/stmicro/stmmac/dwxgmac2_dma.c b/drivers/net/ethernet/stmicro/stmmac/dwxgmac2_dma.c
index c5e25580a43f..2ba712b48a89 100644
--- a/drivers/net/ethernet/stmicro/stmmac/dwxgmac2_dma.c
+++ b/drivers/net/ethernet/stmicro/stmmac/dwxgmac2_dma.c
@@ -283,12 +283,10 @@ static int dwxgmac2_dma_interrupt(void __iomem *ioaddr,
x->normal_irq_n++;
if (likely(intr_status & XGMAC_RI)) {
- if (likely(intr_en & XGMAC_RIE)) {
- x->rx_normal_irq_n++;
- ret |= handle_rx;
- }
+ x->rx_normal_irq_n++;
+ ret |= handle_rx;
}
- if (likely(intr_status & XGMAC_TI)) {
+ if (likely(intr_status & (XGMAC_TI | XGMAC_TBU))) {
x->tx_normal_irq_n++;
ret |= handle_tx;
}
--
2.7.4
prev parent reply other threads:[~2019-02-15 13:42 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-02-15 13:42 [PATCH net-next 0/3] net: stmmac: Performance improvements in Multi-Queue Jose Abreu
2019-02-15 13:42 ` [PATCH net-next 1/3] net: stmmac: Fix NAPI poll in TX path when in multi-queue Jose Abreu
2019-02-16 0:35 ` Florian Fainelli
2019-02-16 17:21 ` Lendacky, Thomas
2019-02-15 13:42 ` [PATCH net-next 2/3] net: stmmac: dwmac4: Also use TBU interrupt to clean TX path Jose Abreu
2019-02-15 13:42 ` Jose Abreu [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=3fd9188875c502aeff3648be199289009bcf9055.1550237884.git.joabreu@synopsys.com \
--to=jose.abreu@synopsys.com \
--cc=alexandre.torgue@st.com \
--cc=davem@davemloft.net \
--cc=joao.pinto@synopsys.com \
--cc=linux-kernel@vger.kernel.org \
--cc=netdev@vger.kernel.org \
--cc=peppe.cavallaro@st.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).