From: Florian Fainelli <f.fainelli@gmail.com>
To: netdev@vger.kernel.org
Cc: Florian Fainelli <f.fainelli@gmail.com>,
"David S. Miller" <davem@davemloft.net>,
Ido Schimmel <idosch@mellanox.com>,
linux-kernel@vger.kernel.org (open list),
devel@driverdev.osuosl.org (open list:STAGING SUBSYSTEM),
bridge@lists.linux-foundation.org (moderated list:ETHERNET
BRIDGE),
jiri@mellanox.com, andrew@lunn.ch, vivien.didelot@gmail.com
Subject: [PATCH net-next v2 8/9] net: Remove SWITCHDEV_ATTR_ID_PORT_BRIDGE_FLAGS_SUPPORT
Date: Fri, 15 Feb 2019 14:53:12 -0800 [thread overview]
Message-ID: <20190215225313.32303-9-f.fainelli@gmail.com> (raw)
In-Reply-To: <20190215225313.32303-1-f.fainelli@gmail.com>
Now that we have converted the bridge code and the drivers to check for
bridge port(s) flags at the time we try to set them, there is no need
for a get() -> set() sequence anymore and
SWITCHDEV_ATTR_ID_PORT_BRIDGE_FLAGS_SUPPORT therefore becomes unused.
Reviewed-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
---
Documentation/networking/switchdev.txt | 6 ++----
.../ethernet/mellanox/mlxsw/spectrum_switchdev.c | 11 +----------
drivers/net/ethernet/rocker/rocker_main.c | 14 +-------------
drivers/staging/fsl-dpaa2/ethsw/ethsw.c | 10 +---------
include/net/switchdev.h | 2 --
net/dsa/slave.c | 10 +---------
6 files changed, 6 insertions(+), 47 deletions(-)
diff --git a/Documentation/networking/switchdev.txt b/Documentation/networking/switchdev.txt
index ea90243340a9..b764568deabf 100644
--- a/Documentation/networking/switchdev.txt
+++ b/Documentation/networking/switchdev.txt
@@ -232,10 +232,8 @@ Learning_sync attribute enables syncing of the learned/forgotten FDB entry to
the bridge's FDB. It's possible, but not optimal, to enable learning on the
device port and on the bridge port, and disable learning_sync.
-To support learning and learning_sync port attributes, the driver implements
-switchdev op switchdev_port_attr_get/set for
-SWITCHDEV_ATTR_PORT_ID_BRIDGE_FLAGS. The driver should initialize the attributes
-to the hardware defaults.
+To support learning, the driver implements switchdev op
+switchdev_port_attr_get/set for SWITCHDEV_ATTR_PORT_ID_BRIDGE_FLAGS.
FDB Ageing
^^^^^^^^^^
diff --git a/drivers/net/ethernet/mellanox/mlxsw/spectrum_switchdev.c b/drivers/net/ethernet/mellanox/mlxsw/spectrum_switchdev.c
index 8cdc0fe17a2e..2311ef8554d9 100644
--- a/drivers/net/ethernet/mellanox/mlxsw/spectrum_switchdev.c
+++ b/drivers/net/ethernet/mellanox/mlxsw/spectrum_switchdev.c
@@ -434,16 +434,7 @@ static void mlxsw_sp_bridge_vlan_put(struct mlxsw_sp_bridge_vlan *bridge_vlan)
static int mlxsw_sp_port_attr_get(struct net_device *dev,
struct switchdev_attr *attr)
{
- switch (attr->id) {
- case SWITCHDEV_ATTR_ID_PORT_BRIDGE_FLAGS_SUPPORT:
- attr->u.brport_flags_support = BR_LEARNING | BR_FLOOD |
- BR_MCAST_FLOOD;
- break;
- default:
- return -EOPNOTSUPP;
- }
-
- return 0;
+ return -EOPNOTSUPP;
}
static int
diff --git a/drivers/net/ethernet/rocker/rocker_main.c b/drivers/net/ethernet/rocker/rocker_main.c
index 2102e449c037..107fcbec3234 100644
--- a/drivers/net/ethernet/rocker/rocker_main.c
+++ b/drivers/net/ethernet/rocker/rocker_main.c
@@ -2074,19 +2074,7 @@ static const struct net_device_ops rocker_port_netdev_ops = {
static int rocker_port_attr_get(struct net_device *dev,
struct switchdev_attr *attr)
{
- const struct rocker_port *rocker_port = netdev_priv(dev);
- int err = 0;
-
- switch (attr->id) {
- case SWITCHDEV_ATTR_ID_PORT_BRIDGE_FLAGS_SUPPORT:
- err = rocker_world_port_attr_bridge_flags_support_get(rocker_port,
- &attr->u.brport_flags_support);
- break;
- default:
- return -EOPNOTSUPP;
- }
-
- return err;
+ return -EOPNOTSUPP;
}
static int rocker_port_attr_set(struct net_device *dev,
diff --git a/drivers/staging/fsl-dpaa2/ethsw/ethsw.c b/drivers/staging/fsl-dpaa2/ethsw/ethsw.c
index 640fd6834be1..e71bc7ed363e 100644
--- a/drivers/staging/fsl-dpaa2/ethsw/ethsw.c
+++ b/drivers/staging/fsl-dpaa2/ethsw/ethsw.c
@@ -643,15 +643,7 @@ static void ethsw_teardown_irqs(struct fsl_mc_device *sw_dev)
static int swdev_port_attr_get(struct net_device *netdev,
struct switchdev_attr *attr)
{
- switch (attr->id) {
- case SWITCHDEV_ATTR_ID_PORT_BRIDGE_FLAGS_SUPPORT:
- attr->u.brport_flags_support = BR_LEARNING | BR_FLOOD;
- break;
- default:
- return -EOPNOTSUPP;
- }
-
- return 0;
+ return -EOPNOTSUPP;
}
static int port_attr_stp_state_set(struct net_device *netdev,
diff --git a/include/net/switchdev.h b/include/net/switchdev.h
index de72b0a3867f..0f352019ef99 100644
--- a/include/net/switchdev.h
+++ b/include/net/switchdev.h
@@ -45,7 +45,6 @@ enum switchdev_attr_id {
SWITCHDEV_ATTR_ID_UNDEFINED,
SWITCHDEV_ATTR_ID_PORT_STP_STATE,
SWITCHDEV_ATTR_ID_PORT_BRIDGE_FLAGS,
- SWITCHDEV_ATTR_ID_PORT_BRIDGE_FLAGS_SUPPORT,
SWITCHDEV_ATTR_ID_PORT_PRE_BRIDGE_FLAGS,
SWITCHDEV_ATTR_ID_PORT_MROUTER,
SWITCHDEV_ATTR_ID_BRIDGE_AGEING_TIME,
@@ -63,7 +62,6 @@ struct switchdev_attr {
union {
u8 stp_state; /* PORT_STP_STATE */
unsigned long brport_flags; /* PORT_{PRE}_BRIDGE_FLAGS */
- unsigned long brport_flags_support; /* PORT_BRIDGE_FLAGS_SUPPORT */
bool mrouter; /* PORT_MROUTER */
clock_t ageing_time; /* BRIDGE_AGEING_TIME */
bool vlan_filtering; /* BRIDGE_VLAN_FILTERING */
diff --git a/net/dsa/slave.c b/net/dsa/slave.c
index d3370e840956..06aa7376d968 100644
--- a/net/dsa/slave.c
+++ b/net/dsa/slave.c
@@ -390,15 +390,7 @@ static int dsa_slave_get_port_parent_id(struct net_device *dev,
static int dsa_slave_port_attr_get(struct net_device *dev,
struct switchdev_attr *attr)
{
- switch (attr->id) {
- case SWITCHDEV_ATTR_ID_PORT_BRIDGE_FLAGS_SUPPORT:
- attr->u.brport_flags_support = 0;
- break;
- default:
- return -EOPNOTSUPP;
- }
-
- return 0;
+ return -EOPNOTSUPP;
}
static inline netdev_tx_t dsa_slave_netpoll_send_skb(struct net_device *dev,
--
2.17.1
next prev parent reply other threads:[~2019-02-15 22:53 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-02-15 22:53 [PATCH net-next v2 0/9] net: Get rid of switchdev_port_attr_get() Florian Fainelli
2019-02-15 22:53 ` [PATCH net-next v2 1/9] Documentation: networking: switchdev: Update port parent ID section Florian Fainelli
2019-02-15 22:53 ` [PATCH net-next v2 2/9] net: switchdev: Add PORT_PRE_BRIDGE_FLAGS Florian Fainelli
2019-02-15 22:53 ` [PATCH net-next v2 3/9] mlxsw: spectrum: Handle PORT_PRE_BRIDGE_FLAGS Florian Fainelli
2019-02-15 22:53 ` [PATCH net-next v2 4/9] staging: fsl-dpaa2: ethsw: " Florian Fainelli
2019-02-15 22:53 ` [PATCH net-next v2 5/9] net: dsa: Add setter for SWITCHDEV_ATTR_ID_PORT_BRIDGE_FLAGS Florian Fainelli
2019-02-15 22:53 ` [PATCH net-next v2 6/9] rocker: Check Handle PORT_PRE_BRIDGE_FLAGS Florian Fainelli
2019-02-15 22:53 ` [PATCH net-next v2 7/9] net: bridge: Stop calling switchdev_port_attr_get() Florian Fainelli
2019-02-15 22:53 ` Florian Fainelli [this message]
2019-02-15 22:53 ` [PATCH net-next v2 9/9] net: Get rid of switchdev_port_attr_get() Florian Fainelli
2019-02-16 0:37 ` [PATCH net-next v2 0/9] " Florian Fainelli
2019-02-16 4:49 ` David Miller
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190215225313.32303-9-f.fainelli@gmail.com \
--to=f.fainelli@gmail.com \
--cc=andrew@lunn.ch \
--cc=bridge@lists.linux-foundation.org \
--cc=davem@davemloft.net \
--cc=devel@driverdev.osuosl.org \
--cc=idosch@mellanox.com \
--cc=jiri@mellanox.com \
--cc=linux-kernel@vger.kernel.org \
--cc=netdev@vger.kernel.org \
--cc=vivien.didelot@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).