From: Krzysztof Kozlowski <krzk@kernel.org>
To: Kukjin Kim <kgene@kernel.org>,
Krzysztof Kozlowski <krzk@kernel.org>,
devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
linux-samsung-soc@vger.kernel.org, linux-kernel@vger.kernel.org
Cc: Markus Reichl <reichl@t-online.de>
Subject: [PATCH 3/3] ARM: dts: exynos: Raise maximum buck regulator voltages on Arndale Octa
Date: Mon, 18 Feb 2019 18:32:58 +0100 [thread overview]
Message-ID: <20190218173258.7071-3-krzk@kernel.org> (raw)
In-Reply-To: <20190218173258.7071-1-krzk@kernel.org>
Raise the buck 1-7 regulators voltages to allow cpufreq choosing them
and to fix warnings during boot:
core: _opp_supported_by_regulators: OPP minuV: 1250000 maxuV: 1250000, not supported by regulator
cpu cpu0: _opp_add: OPP not supported by regulators (1800000000)
The maximum value is now in sync with other Exynos5420 boards with
S2MPS11 PMIC (SMDK5420, Odroid XU3 family). This also matches the
values used in old patches done by Linaro Samsung team.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
---
arch/arm/boot/dts/exynos5420-arndale-octa.dts | 14 +++++++-------
1 file changed, 7 insertions(+), 7 deletions(-)
diff --git a/arch/arm/boot/dts/exynos5420-arndale-octa.dts b/arch/arm/boot/dts/exynos5420-arndale-octa.dts
index 308c74ebeacd..c7d9604a119e 100644
--- a/arch/arm/boot/dts/exynos5420-arndale-octa.dts
+++ b/arch/arm/boot/dts/exynos5420-arndale-octa.dts
@@ -342,48 +342,48 @@
buck1_reg: BUCK1 {
regulator-name = "PVDD_MIF_1V1";
regulator-min-microvolt = <800000>;
- regulator-max-microvolt = <1100000>;
+ regulator-max-microvolt = <1300000>;
regulator-always-on;
};
buck2_reg: BUCK2 {
regulator-name = "vdd_arm";
regulator-min-microvolt = <800000>;
- regulator-max-microvolt = <1000000>;
+ regulator-max-microvolt = <1500000>;
regulator-always-on;
};
buck3_reg: BUCK3 {
regulator-name = "PVDD_INT_1V0";
regulator-min-microvolt = <800000>;
- regulator-max-microvolt = <1000000>;
+ regulator-max-microvolt = <1400000>;
regulator-always-on;
};
buck4_reg: BUCK4 {
regulator-name = "PVDD_G3D_1V0";
regulator-min-microvolt = <800000>;
- regulator-max-microvolt = <1000000>;
+ regulator-max-microvolt = <1400000>;
};
buck5_reg: BUCK5 {
regulator-name = "PVDD_LPDDR3_1V2";
regulator-min-microvolt = <800000>;
- regulator-max-microvolt = <1200000>;
+ regulator-max-microvolt = <1400000>;
regulator-always-on;
};
buck6_reg: BUCK6 {
regulator-name = "PVDD_KFC_1V0";
regulator-min-microvolt = <800000>;
- regulator-max-microvolt = <1000000>;
+ regulator-max-microvolt = <1500000>;
regulator-always-on;
};
buck7_reg: BUCK7 {
regulator-name = "VIN_LLDO_1V4";
regulator-min-microvolt = <800000>;
- regulator-max-microvolt = <1400000>;
+ regulator-max-microvolt = <1500000>;
regulator-always-on;
};
--
2.17.1
prev parent reply other threads:[~2019-02-18 17:33 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-02-18 17:32 [PATCH 1/3] ARM: dts: exynos: Use stdout path property on Arndale Octa board Krzysztof Kozlowski
2019-02-18 17:32 ` [PATCH 2/3] ARM: dts: exynos: Add unused PMIC regulators " Krzysztof Kozlowski
2019-02-18 17:32 ` Krzysztof Kozlowski [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190218173258.7071-3-krzk@kernel.org \
--to=krzk@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=kgene@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-samsung-soc@vger.kernel.org \
--cc=reichl@t-online.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).