From: Huazhong Tan <tanhuazhong@huawei.com>
To: <davem@davemloft.net>
Cc: <netdev@vger.kernel.org>, <linux-kernel@vger.kernel.org>,
<salil.mehta@huawei.com>, <yisen.zhuang@huawei.com>,
<linuxarm@huawei.com>, Jian Shen <shenjian15@huawei.com>,
Peng Li <lipeng321@huawei.com>,
"Huazhong Tan" <tanhuazhong@huawei.com>
Subject: [Patch net-next 04/12] net: hns3: fix port info query issue for copper port
Date: Wed, 20 Feb 2019 10:32:43 +0800 [thread overview]
Message-ID: <1550629971-23999-5-git-send-email-tanhuazhong@huawei.com> (raw)
In-Reply-To: <1550629971-23999-1-git-send-email-tanhuazhong@huawei.com>
From: Jian Shen <shenjian15@huawei.com>
In original codes, for copper port which doesn't connect to phy,
it always returns -EOPNOTSUPP when query port information. This
patch fixes it by return the port information of MAC.
Fixes: 5f373b158523 ("net: hns3: Fix speed/duplex information loss problem when executing ethtool ethx cmd of VF")
Signed-off-by: Jian Shen <shenjian15@huawei.com>
Signed-off-by: Peng Li <lipeng321@huawei.com>
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
---
drivers/net/ethernet/hisilicon/hns3/hns3_ethtool.c | 9 +++--
.../ethernet/hisilicon/hns3/hns3pf/hclge_main.c | 38 +++++++++++++++++++---
.../ethernet/hisilicon/hns3/hns3pf/hclge_main.h | 4 +++
.../ethernet/hisilicon/hns3/hns3pf/hclge_mdio.c | 17 ++--------
4 files changed, 44 insertions(+), 24 deletions(-)
diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3_ethtool.c b/drivers/net/ethernet/hisilicon/hns3/hns3_ethtool.c
index 63f5f56..d94c90a 100644
--- a/drivers/net/ethernet/hisilicon/hns3/hns3_ethtool.c
+++ b/drivers/net/ethernet/hisilicon/hns3/hns3_ethtool.c
@@ -621,12 +621,11 @@ static int hns3_get_link_ksettings(struct net_device *netdev,
hns3_get_ksettings(h, cmd);
break;
case HNAE3_MEDIA_TYPE_COPPER:
- if (!netdev->phydev)
- return -EOPNOTSUPP;
-
cmd->base.port = PORT_TP;
- phy_ethtool_ksettings_get(netdev->phydev, cmd);
-
+ if (!netdev->phydev)
+ hns3_get_ksettings(h, cmd);
+ else
+ phy_ethtool_ksettings_get(netdev->phydev, cmd);
break;
default:
diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c
index 9a442f3..87edac4 100644
--- a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c
+++ b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c
@@ -862,14 +862,44 @@ static void hclge_parse_fiber_link_mode(struct hclge_dev *hdev,
linkmode_set_bit(ETHTOOL_LINK_MODE_Pause_BIT, supported);
}
+static void hclge_parse_copper_link_mode(struct hclge_dev *hdev,
+ u8 speed_ability)
+{
+ unsigned long *supported = hdev->hw.mac.supported;
+
+ /* default to support all speed for GE port */
+ if (!speed_ability)
+ speed_ability = HCLGE_SUPPORT_GE;
+
+ if (speed_ability & HCLGE_SUPPORT_1G_BIT)
+ linkmode_set_bit(ETHTOOL_LINK_MODE_1000baseT_Full_BIT,
+ supported);
+
+ if (speed_ability & HCLGE_SUPPORT_100M_BIT) {
+ linkmode_set_bit(ETHTOOL_LINK_MODE_100baseT_Full_BIT,
+ supported);
+ linkmode_set_bit(ETHTOOL_LINK_MODE_100baseT_Half_BIT,
+ supported);
+ }
+
+ if (speed_ability & HCLGE_SUPPORT_10M_BIT) {
+ linkmode_set_bit(ETHTOOL_LINK_MODE_10baseT_Full_BIT, supported);
+ linkmode_set_bit(ETHTOOL_LINK_MODE_10baseT_Half_BIT, supported);
+ }
+
+ linkmode_set_bit(ETHTOOL_LINK_MODE_Autoneg_BIT, supported);
+ linkmode_set_bit(ETHTOOL_LINK_MODE_TP_BIT, supported);
+ linkmode_set_bit(ETHTOOL_LINK_MODE_Pause_BIT, supported);
+}
+
static void hclge_parse_link_mode(struct hclge_dev *hdev, u8 speed_ability)
{
u8 media_type = hdev->hw.mac.media_type;
- if (media_type != HNAE3_MEDIA_TYPE_FIBER)
- return;
-
- hclge_parse_fiber_link_mode(hdev, speed_ability);
+ if (media_type == HNAE3_MEDIA_TYPE_FIBER)
+ hclge_parse_fiber_link_mode(hdev, speed_ability);
+ else if (media_type == HNAE3_MEDIA_TYPE_COPPER)
+ hclge_parse_copper_link_mode(hdev, speed_ability);
}
static void hclge_parse_cfg(struct hclge_cfg *cfg, struct hclge_desc *desc)
diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.h b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.h
index c939f4a..3303919 100644
--- a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.h
+++ b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.h
@@ -188,6 +188,10 @@ enum HLCGE_PORT_TYPE {
#define HCLGE_SUPPORT_25G_BIT BIT(2)
#define HCLGE_SUPPORT_50G_BIT BIT(3)
#define HCLGE_SUPPORT_100G_BIT BIT(4)
+#define HCLGE_SUPPORT_100M_BIT BIT(6)
+#define HCLGE_SUPPORT_10M_BIT BIT(7)
+#define HCLGE_SUPPORT_GE \
+ (HCLGE_SUPPORT_1G_BIT | HCLGE_SUPPORT_100M_BIT | HCLGE_SUPPORT_10M_BIT)
enum HCLGE_DEV_STATE {
HCLGE_STATE_REINITING,
diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_mdio.c b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_mdio.c
index 84f2878..48eda2c 100644
--- a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_mdio.c
+++ b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_mdio.c
@@ -8,12 +8,6 @@
#include "hclge_main.h"
#include "hclge_mdio.h"
-#define HCLGE_PHY_SUPPORTED_FEATURES (SUPPORTED_Autoneg | \
- SUPPORTED_TP | \
- PHY_10BT_FEATURES | \
- PHY_100BT_FEATURES | \
- SUPPORTED_1000baseT_Full)
-
enum hclge_mdio_c22_op_seq {
HCLGE_MDIO_C22_WRITE = 1,
HCLGE_MDIO_C22_READ = 2
@@ -217,16 +211,9 @@ int hclge_mac_connect_phy(struct hnae3_handle *handle)
return ret;
}
- linkmode_set_bit(ETHTOOL_LINK_MODE_Autoneg_BIT, mask);
- linkmode_set_bit(ETHTOOL_LINK_MODE_TP_BIT, mask);
- linkmode_set_bit_array(phy_10_100_features_array,
- ARRAY_SIZE(phy_10_100_features_array),
- mask);
- linkmode_set_bit_array(phy_gbit_features_array,
- ARRAY_SIZE(phy_gbit_features_array),
- mask);
+ linkmode_copy(mask, hdev->hw.mac.supported);
linkmode_and(phydev->supported, phydev->supported, mask);
- phy_support_asym_pause(phydev);
+ linkmode_copy(phydev->advertising, phydev->supported);
return 0;
}
--
2.7.4
next prev parent reply other threads:[~2019-02-20 2:34 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-02-20 2:32 [Patch net-next 00/12] code optimizations & bugfixes for HNS3 driver Huazhong Tan
2019-02-20 2:32 ` [Patch net-next 01/12] net: hns3: add pointer checking at the beginning of the exported functions Huazhong Tan
2019-02-20 2:32 ` [Patch net-next 02/12] net: hns3: Check variable is valid before assigning it to another Huazhong Tan
2019-02-20 2:32 ` [Patch net-next 03/12] net: hns3: convert mac advertize and supported from u32 to link mode Huazhong Tan
2019-02-20 2:32 ` Huazhong Tan [this message]
2019-02-20 2:32 ` [Patch net-next 05/12] net: hns3: modify print message of ssu common ecc errors Huazhong Tan
2019-02-20 2:32 ` [Patch net-next 06/12] net: hns3: some bugfix of ppu(rcb) ras errors Huazhong Tan
2019-02-20 2:32 ` [Patch net-next 07/12] net: hns3: enable 8~11th bit of mac common msi-x error Huazhong Tan
2019-02-20 2:32 ` [Patch net-next 08/12] net: hns3: fix 6th bit of ppp mpf abnormal errors Huazhong Tan
2019-02-20 2:32 ` [Patch net-next 09/12] net: hns3: Record VF unicast and multicast tables Huazhong Tan
2019-02-20 2:32 ` [Patch net-next 10/12] net: hns3: Record VF vlan tables Huazhong Tan
2019-02-20 2:32 ` [Patch net-next 11/12] net: hns3: uninitialize command queue while unloading PF driver Huazhong Tan
2019-02-20 2:32 ` [Patch net-next 12/12] net: hns3: clear command queue's registers when unloading VF driver Huazhong Tan
2019-02-22 0:34 ` [Patch net-next 00/12] code optimizations & bugfixes for HNS3 driver David Miller
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1550629971-23999-5-git-send-email-tanhuazhong@huawei.com \
--to=tanhuazhong@huawei.com \
--cc=davem@davemloft.net \
--cc=linux-kernel@vger.kernel.org \
--cc=linuxarm@huawei.com \
--cc=lipeng321@huawei.com \
--cc=netdev@vger.kernel.org \
--cc=salil.mehta@huawei.com \
--cc=shenjian15@huawei.com \
--cc=yisen.zhuang@huawei.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).