linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: George Hilliard <thirtythreeforty@gmail.com>
To: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org, Neil Brown <neil@brown.name>,
	George Hilliard <thirtythreeforty@gmail.com>
Subject: [PATCH 07/10] staging: mt7621-mmc: Initialize completions a single time during probe
Date: Tue, 19 Feb 2019 22:17:51 -0700	[thread overview]
Message-ID: <20190220051754.12195-8-thirtythreeforty@gmail.com> (raw)
In-Reply-To: <20190220051754.12195-1-thirtythreeforty@gmail.com>

The module was initializing completions whenever it was going to wait on
them, and not when the completion was allocated.  This is incorrect
according to the completion docs:

    Calling init_completion() on the same completion object twice is
    most likely a bug [...]

Re-initialization is also unnecessary because the module never uses
complete_all().  Fix this by only ever initializing the completion a
single time.

Signed-off-by: George Hilliard <thirtythreeforty@gmail.com>
---
 drivers/staging/mt7621-mmc/sd.c | 13 +++++++++----
 1 file changed, 9 insertions(+), 4 deletions(-)

diff --git a/drivers/staging/mt7621-mmc/sd.c b/drivers/staging/mt7621-mmc/sd.c
index f12f9d6611c9..942c0d63d710 100644
--- a/drivers/staging/mt7621-mmc/sd.c
+++ b/drivers/staging/mt7621-mmc/sd.c
@@ -468,7 +468,9 @@ static unsigned int msdc_command_start(struct msdc_host   *host,
 	host->cmd     = cmd;
 	host->cmd_rsp = resp;
 
-	init_completion(&host->cmd_done);
+	// The completion should have been consumed by the previous command
+	// response handler, because the mmc requests should be serialized
+	BUG_ON(completion_done(&host->cmd_done));
 
 	sdr_set_bits(host->base + MSDC_INTEN, wints);
 	sdc_send_cmd(rawcmd, cmd->arg);
@@ -490,7 +492,6 @@ static unsigned int msdc_command_resp(struct msdc_host   *host,
 		    MSDC_INT_ACMD19_DONE;
 
 	BUG_ON(in_interrupt());
-	//init_completion(&host->cmd_done);
 	//sdr_set_bits(host->base + MSDC_INTEN, wints);
 
 	spin_unlock(&host->lock);
@@ -674,7 +675,10 @@ static int msdc_do_request(struct mmc_host *mmc, struct mmc_request *mrq)
 		//msdc_clr_fifo(host);  /* no need */
 
 		msdc_dma_on();  /* enable DMA mode first!! */
-		init_completion(&host->xfer_done);
+
+		// The completion should have been consumed by the previous xfer
+		// response handler, because the mmc requests should be serialized
+		BUG_ON(completion_done(&host->xfer_done));
 
 		/* start the command first*/
 		if (msdc_command_start(host, cmd, CMD_TIMEOUT) != 0)
@@ -693,7 +697,6 @@ static int msdc_do_request(struct mmc_host *mmc, struct mmc_request *mrq)
 		/* for read, the data coming too fast, then CRC error
 		 *  start DMA no business with CRC.
 		 */
-		//init_completion(&host->xfer_done);
 		msdc_dma_start(host);
 
 		spin_unlock(&host->lock);
@@ -1708,6 +1711,8 @@ static int msdc_drv_probe(struct platform_device *pdev)
 	}
 	msdc_init_gpd_bd(host, &host->dma);
 
+	init_completion(&host->cmd_done);
+	init_completion(&host->xfer_done);
 	INIT_DELAYED_WORK(&host->card_delaywork, msdc_tasklet_card);
 	spin_lock_init(&host->lock);
 	msdc_init_hw(host);
-- 
2.20.1


  parent reply	other threads:[~2019-02-20  5:18 UTC|newest]

Thread overview: 12+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-02-20  5:17 mt7621-mmc driver improvements George Hilliard
2019-02-20  5:17 ` [PATCH 01/10] staging: mt7621-mmc: fix unused variable compiler warning George Hilliard
2019-02-20  5:17 ` [PATCH 02/10] staging: mt7621-mmc: Remove obsolete comments George Hilliard
2019-02-20  5:17 ` [PATCH 03/10] staging: mt7621-mmc: Remove references to nonexistent mt7621_spi_ops George Hilliard
2019-02-20  5:17 ` [PATCH 04/10] staging: mt7621-mmc: Fix warning when reloading module with debug msgs enabled George Hilliard
2019-02-20  5:17 ` [PATCH 05/10] staging: mt7621-mmc: Use pinctrl subsystem to select SDXC pin mode George Hilliard
2019-02-20 11:27   ` Jonas Gorski
2019-02-20  5:17 ` [PATCH 06/10] staging: mt7621-mmc: Bill the caller for I/O time George Hilliard
2019-02-20  5:17 ` George Hilliard [this message]
2019-02-20  5:17 ` [PATCH 08/10] staging: mt7621-mmc: Check for nonzero number of scatterlist entries George Hilliard
2019-02-20  5:17 ` [PATCH 09/10] staging: mt7621-mmc: Remove redundant host->mmc->f_max write George Hilliard
2019-02-20  5:17 ` [PATCH 10/10] staging: mt7621-mmc: Immediately notify mmc layer of card change detection George Hilliard

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20190220051754.12195-8-thirtythreeforty@gmail.com \
    --to=thirtythreeforty@gmail.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mips@linux-mips.org \
    --cc=neil@brown.name \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).