From: Balakrishna Godavarthi <bgodavar@codeaurora.org>
To: marcel@holtmann.org, johan.hedberg@gmail.com
Cc: mka@chromium.org, linux-kernel@vger.kernel.org,
linux-bluetooth@vger.kernel.org, hemantg@codeaurora.org,
linux-arm-msm@vger.kernel.org,
Balakrishna Godavarthi <bgodavar@codeaurora.org>
Subject: [PATCH v1] Bluetooth: hci_qca: Update baudrate change wait time for wcn3990
Date: Wed, 20 Feb 2019 16:55:16 +0530 [thread overview]
Message-ID: <20190220112516.19179-1-bgodavar@codeaurora.org> (raw)
This patch will update the baudrate change request wait time from
300 ms to 100 ms. When host sends the change baudrate request to
the controller, controller sets its clock and wait until the
clocks settle down. Here the Wait time is required for both
host and controller to be on sync.
Signed-off-by: Balakrishna Godavarthi <bgodavar@codeaurora.org>
---
drivers/bluetooth/hci_qca.c | 12 ++++++++++--
1 file changed, 10 insertions(+), 2 deletions(-)
diff --git a/drivers/bluetooth/hci_qca.c b/drivers/bluetooth/hci_qca.c
index 5e03504c4e0c..22f3c983f868 100644
--- a/drivers/bluetooth/hci_qca.c
+++ b/drivers/bluetooth/hci_qca.c
@@ -59,7 +59,8 @@
#define IBS_WAKE_RETRANS_TIMEOUT_MS 100
#define IBS_TX_IDLE_TIMEOUT_MS 2000
-#define BAUDRATE_SETTLE_TIMEOUT_MS 300
+#define ROME_BD_SETTLE_TIMEOUT_MS 300
+#define WCN3990_BD_SETTLE_TIMEOUT_MS 100
#define POWER_PULSE_TRANS_TIMEOUT_MS 100
/* susclk rate */
@@ -965,8 +966,11 @@ static int qca_set_baudrate(struct hci_dev *hdev, uint8_t baudrate)
struct hci_uart *hu = hci_get_drvdata(hdev);
struct qca_data *qca = hu->priv;
struct sk_buff *skb;
+ struct qca_serdev *qcadev;
+ unsigned int bd_settling_timeout;
u8 cmd[] = { 0x01, 0x48, 0xFC, 0x01, 0x00 };
+ qcadev = serdev_device_get_drvdata(hu->serdev);
if (baudrate > QCA_BAUDRATE_3200000)
return -EINVAL;
@@ -989,8 +993,12 @@ static int qca_set_baudrate(struct hci_dev *hdev, uint8_t baudrate)
* controller will come back after they receive this HCI command
* then host can communicate with new baudrate to controller
*/
+ bd_settling_timeout = qcadev->btsoc_type == QCA_WCN3990 ?
+ WCN3990_BD_SETTLE_TIMEOUT_MS :
+ ROME_BD_SETTLE_TIMEOUT_MS;
+
set_current_state(TASK_UNINTERRUPTIBLE);
- schedule_timeout(msecs_to_jiffies(BAUDRATE_SETTLE_TIMEOUT_MS));
+ schedule_timeout(msecs_to_jiffies(bd_settling_timeout));
set_current_state(TASK_RUNNING);
return 0;
--
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project
next reply other threads:[~2019-02-20 11:25 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-02-20 11:25 Balakrishna Godavarthi [this message]
2019-02-20 23:43 ` [PATCH v1] Bluetooth: hci_qca: Update baudrate change wait time for wcn3990 Matthias Kaehlcke
2019-02-25 23:56 ` Matthias Kaehlcke
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190220112516.19179-1-bgodavar@codeaurora.org \
--to=bgodavar@codeaurora.org \
--cc=hemantg@codeaurora.org \
--cc=johan.hedberg@gmail.com \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-bluetooth@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=marcel@holtmann.org \
--cc=mka@chromium.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).