linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Ivan Khoronzhuk <ivan.khoronzhuk@linaro.org>
To: davem@davemloft.net, grygorii.strashko@ti.com, f.fainelli@gmail.com
Cc: linux-omap@vger.kernel.org, netdev@vger.kernel.org,
	linux-kernel@vger.kernel.org, jiri@mellanox.com,
	ilias.apalodimas@linaro.org,
	Ivan Khoronzhuk <ivan.khoronzhuk@linaro.org>
Subject: [PATCH net-next 3/6] net: 8021q: vlan_dev: add vid tag for vlan device own address
Date: Tue, 26 Feb 2019 20:45:53 +0200	[thread overview]
Message-ID: <20190226184556.16082-4-ivan.khoronzhuk@linaro.org> (raw)
In-Reply-To: <20190226184556.16082-1-ivan.khoronzhuk@linaro.org>

The vlan device address is held separately from uc/mc lists and
handled differently. The vlan dev address is bound with real device
address only if it's inherited from init, in all other cases it's
separate address entry in uc list. With vid set, the address becomes
not inherited from real device after it's set manually as before, but
is part of uc list any way, with appropriate vid tag set. If vid_len
for real device is 0, the behaviour is the same as before this change,
so shouldn't be any impact on systems w/o individual virtual device
filtering (IVDF) enabled. This allows to control and sync vlan device
address and disable concrete vlan packet income when vlan interface is
down.

Signed-off-by: Ivan Khoronzhuk <ivan.khoronzhuk@linaro.org>
---
 net/8021q/vlan.c     |  3 ++
 net/8021q/vlan_dev.c | 76 +++++++++++++++++++++++++++++++++-----------
 2 files changed, 60 insertions(+), 19 deletions(-)

diff --git a/net/8021q/vlan.c b/net/8021q/vlan.c
index dc4411165e43..9c72551a9a1e 100644
--- a/net/8021q/vlan.c
+++ b/net/8021q/vlan.c
@@ -295,6 +295,9 @@ static void vlan_sync_address(struct net_device *dev,
 	if (vlan_dev_inherit_address(vlandev, dev))
 		goto out;
 
+	if (dev->vid_len)
+		goto out;
+
 	/* vlan address was different from the old address and is equal to
 	 * the new address */
 	if (!ether_addr_equal(vlandev->dev_addr, vlan->real_dev_addr) &&
diff --git a/net/8021q/vlan_dev.c b/net/8021q/vlan_dev.c
index 93d20b1f4916..634436e780f1 100644
--- a/net/8021q/vlan_dev.c
+++ b/net/8021q/vlan_dev.c
@@ -257,12 +257,61 @@ static void vlan_dev_set_addr_vid(struct net_device *vlan_dev, u8 *addr)
 	addr[vlan_dev->addr_len + 1] = (vid >> 8) & 0xf;
 }
 
+static int vlan_dev_add_addr(struct net_device *dev, u8 *addr)
+{
+	struct net_device *real_dev = vlan_dev_real_dev(dev);
+	unsigned char naddr[ETH_ALEN + NET_8021Q_VID_TSIZE];
+
+	if (real_dev->vid_len) {
+		memcpy(naddr, addr, dev->addr_len);
+		vlan_dev_set_addr_vid(dev, naddr);
+		return dev_vid_uc_add(real_dev, naddr);
+	}
+
+	if (ether_addr_equal(addr, real_dev->dev_addr))
+		return 0;
+
+	return dev_uc_add(real_dev, addr);
+}
+
+static void vlan_dev_del_addr(struct net_device *dev, u8 *addr)
+{
+	struct net_device *real_dev = vlan_dev_real_dev(dev);
+	unsigned char naddr[ETH_ALEN + NET_8021Q_VID_TSIZE];
+
+	if (real_dev->vid_len) {
+		memcpy(naddr, addr, dev->addr_len);
+		vlan_dev_set_addr_vid(dev, naddr);
+		dev_vid_uc_del(real_dev, naddr);
+		return;
+	}
+
+	if (!ether_addr_equal(dev->dev_addr, real_dev->dev_addr))
+		dev_uc_del(real_dev, addr);
+}
+
+static int vlan_dev_subs_addr(struct net_device *dev, u8 *addr)
+{
+	int err;
+
+	err = vlan_dev_add_addr(dev, addr);
+	if (err < 0)
+		return err;
+
+	vlan_dev_del_addr(dev, dev->dev_addr);
+	return err;
+}
+
 bool vlan_dev_inherit_address(struct net_device *dev,
 			      struct net_device *real_dev)
 {
 	if (dev->addr_assign_type != NET_ADDR_STOLEN)
 		return false;
 
+	if (real_dev->vid_len)
+		if (vlan_dev_subs_addr(dev, real_dev->dev_addr))
+			return false;
+
 	ether_addr_copy(dev->dev_addr, real_dev->dev_addr);
 	call_netdevice_notifiers(NETDEV_CHANGEADDR, dev);
 	return true;
@@ -278,9 +327,10 @@ static int vlan_dev_open(struct net_device *dev)
 	    !(vlan->flags & VLAN_FLAG_LOOSE_BINDING))
 		return -ENETDOWN;
 
-	if (!ether_addr_equal(dev->dev_addr, real_dev->dev_addr) &&
-	    !vlan_dev_inherit_address(dev, real_dev)) {
-		err = dev_uc_add(real_dev, dev->dev_addr);
+	if (ether_addr_equal(dev->dev_addr, real_dev->dev_addr) ||
+	    (!ether_addr_equal(dev->dev_addr, real_dev->dev_addr) &&
+	     !vlan_dev_inherit_address(dev, real_dev))) {
+		err = vlan_dev_add_addr(dev, dev->dev_addr);
 		if (err < 0)
 			goto out;
 	}
@@ -312,8 +362,7 @@ static int vlan_dev_open(struct net_device *dev)
 	if (dev->flags & IFF_ALLMULTI)
 		dev_set_allmulti(real_dev, -1);
 del_unicast:
-	if (!ether_addr_equal(dev->dev_addr, real_dev->dev_addr))
-		dev_uc_del(real_dev, dev->dev_addr);
+	vlan_dev_del_addr(dev, dev->dev_addr);
 out:
 	netif_carrier_off(dev);
 	return err;
@@ -331,18 +380,14 @@ static int vlan_dev_stop(struct net_device *dev)
 	if (dev->flags & IFF_PROMISC)
 		dev_set_promiscuity(real_dev, -1);
 
-	if (!ether_addr_equal(dev->dev_addr, real_dev->dev_addr))
-		dev_uc_del(real_dev, dev->dev_addr);
-
+	vlan_dev_del_addr(dev, dev->dev_addr);
 	netif_carrier_off(dev);
 	return 0;
 }
 
 static int vlan_dev_set_mac_address(struct net_device *dev, void *p)
 {
-	struct net_device *real_dev = vlan_dev_priv(dev)->real_dev;
 	struct sockaddr *addr = p;
-	int err;
 
 	if (!is_valid_ether_addr(addr->sa_data))
 		return -EADDRNOTAVAIL;
@@ -350,15 +395,8 @@ static int vlan_dev_set_mac_address(struct net_device *dev, void *p)
 	if (!(dev->flags & IFF_UP))
 		goto out;
 
-	if (!ether_addr_equal(addr->sa_data, real_dev->dev_addr)) {
-		err = dev_uc_add(real_dev, addr->sa_data);
-		if (err < 0)
-			return err;
-	}
-
-	if (!ether_addr_equal(dev->dev_addr, real_dev->dev_addr))
-		dev_uc_del(real_dev, dev->dev_addr);
-
+	if (vlan_dev_subs_addr(dev, addr->sa_data))
+		return true;
 out:
 	ether_addr_copy(dev->dev_addr, addr->sa_data);
 	return 0;
-- 
2.17.1


  parent reply	other threads:[~2019-02-26 18:47 UTC|newest]

Thread overview: 20+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-02-26 18:45 [PATCH net-next 0/6] net: add individual virtual device filtering Ivan Khoronzhuk
2019-02-26 18:45 ` [PATCH net-next 1/6] net: core: dev_addr_lists: add VID to device address Ivan Khoronzhuk
2019-02-28  4:24   ` Florian Fainelli
2019-03-01 12:21     ` Ivan Khoronzhuk
2019-02-26 18:45 ` [PATCH net-next 2/6] net: 8021q: vlan_dev: add vid tag to addresses of uc and mc lists Ivan Khoronzhuk
2019-02-28  4:09   ` Florian Fainelli
2019-03-01 12:24     ` Ivan Khoronzhuk
2019-03-02  3:19       ` Florian Fainelli
2019-02-26 18:45 ` Ivan Khoronzhuk [this message]
2019-02-28  4:13   ` [PATCH net-next 3/6] net: 8021q: vlan_dev: add vid tag for vlan device own address Florian Fainelli
2019-03-01 12:28     ` Ivan Khoronzhuk
2019-03-02  3:24       ` Florian Fainelli
2019-02-26 18:45 ` [PATCH net-next 4/6] ethernet: eth: add default vid len for all ehternet kind devices Ivan Khoronzhuk
2019-02-28  4:29   ` Florian Fainelli
2019-03-01 13:11     ` Ivan Khoronzhuk
2019-03-02  3:33       ` Florian Fainelli
2019-02-26 18:45 ` [PATCH net-next 5/6] net: ethernet: ti: cpsw: update mc filtering to use IVDF Ivan Khoronzhuk
2019-02-28  4:17   ` Florian Fainelli
2019-02-26 18:45 ` [PATCH net-next 6/6] net: ethernet: ti: cpsw: add macvlan and ucast/vlan filtering support Ivan Khoronzhuk
2019-02-28  0:23 ` [PATCH net-next 0/6] net: add individual virtual device filtering Florian Fainelli

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20190226184556.16082-4-ivan.khoronzhuk@linaro.org \
    --to=ivan.khoronzhuk@linaro.org \
    --cc=davem@davemloft.net \
    --cc=f.fainelli@gmail.com \
    --cc=grygorii.strashko@ti.com \
    --cc=ilias.apalodimas@linaro.org \
    --cc=jiri@mellanox.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-omap@vger.kernel.org \
    --cc=netdev@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).