linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Paul Burton <paul.burton@mips.com>
To: Linus Torvalds <torvalds@linux-foundation.org>
Cc: "linux-mips@vger.kernel.org" <linux-mips@vger.kernel.org>,
	"linux-kernel@vger.kernel.org" <linux-kernel@vger.kernel.org>
Subject: [GIT PULL] Main MIPS pull request for 5.1
Date: Tue, 5 Mar 2019 00:29:53 +0000	[thread overview]
Message-ID: <20190305002951.jdrcgn5jf5xoa5rr@pburton-laptop> (raw)

[-- Attachment #1: Type: text/plain, Size: 14965 bytes --]

Hi Linus,

Below are the main MIPS changes for v5.1; please pull.

Thanks,
    Paul


The following changes since commit 1c7fc5cbc33980acd13d668f1c8f0313d6ae9fd8:

  Linux 5.0-rc2 (2019-01-14 10:41:12 +1200)

are available in the Git repository at:

  git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux.git tags/mips_5.1

for you to fetch changes up to aeb669d41ffabb91b1542f1f802cb12a989fced0:

  MIPS: lantiq: Remove separate GPHY Firmware loader (2019-02-25 14:17:10 -0800)

----------------------------------------------------------------
Here's the main MIPS pull request for v5.1:

- Support for the MIPSr6 MemoryMapID register & Global INValidate TLB
  (GINVT) instructions, allowing for more efficient TLB maintenance when
  running on a CPU such as the I6500 that supports these.

- Enable huge page support for MIPS64r6.

- Optimize post-DMA cache sync by removing that code entirely for kernel
  configurations in which we know it won't be needed.

- The number of pages allocated for interrupt stacks is now calculated
  correctly, where before we would wastefully allocate too much memory
  in some configurations.

- The ath79 platform migrates to devicetree.

- The bcm47xx platform sees fixes for the Buffalo WHR-G54S board.

- The ingenic/jz4740 platform gains support for appended devicetrees.

- The cavium_octeon, lantiq, loongson32 & sgi-ip27 platforms all see
  cleanups as do various pieces of core architecture code.

----------------------------------------------------------------
Aaro Koskinen (7):
      MIPS: OCTEON: delete SMI/MDIO enable
      MIPS: OCTEON: delete unused cvmx-smix-defs.h
      MIPS: OCTEON: add fixed-link nodes to in-kernel device tree
      MIPS: OCTEON: warn if deprecated link status is being used
      MIPS: OCTEON: don't lie about interface type of CN3005 board
      MIPS: OCTEON: delete board-specific link status
      MIPS: OCTEON: program rx/tx-delay always from DT

Felix Fietkau (6):
      MIPS: ath79: add helpers for setting clocks and expose the ref clock
      MIPS: ath79: move legacy "wdt" and "uart" clock aliases out of soc init
      MIPS: ath79: pass PLL base to clock init functions
      MIPS: ath79: make specifying the reference clock in DT optional
      MIPS: ath79: support setting up clock via DT on all SoC types
      MIPS: ath79: export switch MDIO reference clock

Greg Kroah-Hartman (5):
      mips: cavium: no need to check return value of debugfs_create functions
      mips: ralink: no need to check return value of debugfs_create functions
      mips: mm: no need to check return value of debugfs_create functions
      mips: math-emu: no need to check return value of debugfs_create functions
      mips: kernel: no need to check return value of debugfs_create functions

Hauke Mehrtens (2):
      MIPS: Compile post DMA flush only when needed
      MIPS: lantiq: Remove separate GPHY Firmware loader

Jiaxun Yang (5):
      MIPS: Loongson32: Remove unused platform devices
      MIPS: Loongson32: clarify we don't support MIPS16 and merge configs
      MIPS: Loongson32: Set load address to 0x80200000
      MIPS: Loongson32: workaround di issue
      MIPS: Loongson32: Revert ISA level to MIPS32R2

John Crispin (5):
      MIPS: ath79: drop legacy IRQ code
      MIPS: ath79: drop machfiles
      MIPS: ath79: drop legacy pci code
      MIPS: ath79: drop platform device registration code
      MIPS: ath79: drop !OF clock code

Liu Xiang (1):
      MIPS: irq: Allocate accurate order pages for irq stack

Masahiro Yamada (1):
      MIPS: remove meaningless generic-(CONFIG_GENERIC_CSUM) += checksum.h

Paul Burton (26):
      MIPS: mm: Define activate_mm() using switch_mm()
      MIPS: mm: Remove redundant drop_mmu_context() cpu argument
      MIPS: mm: Remove redundant get_new_mmu_context() cpu argument
      MIPS: mm: Avoid HTW stop/start when dropping an inactive mm
      MIPS: mm: Consolidate drop_mmu_context() has-ASID checks
      MIPS: mm: Move drop_mmu_context() comment into appropriate block
      MIPS: mm: Remove redundant preempt_disable in local_flush_tlb_mm()
      MIPS: mm: Remove local_flush_tlb_mm()
      MIPS: mm: Split obj-y to a file per line
      MIPS: mm: Un-inline get_new_mmu_context
      MIPS: mm: Unify ASID version checks
      MIPS: mm: Add set_cpu_context() for ASID assignments
      MIPS: Add GINVT instruction helpers
      MIPS: MemoryMapID (MMID) Support
      MIPS: Remove open-coded cmpxchg() in set_pte()
      MIPS: Enable hugepage support for MIPS64r6
      MIPS: Don't select ARCH_HAS_SYNC_DMA_FOR_CPU when DMA is coherent
      MIPS: Loongson32: Fix config brokenness; select SYS_SUPPORTS_32BIT_KERNEL
      MIPS: Loongson32: Remove DMA & NAND devices from ls1b/board.c
      MIPS: Export mm switching functions used by KVM
      MIPS: Fix set_pte() for Netlogic XLR using cmpxchg64()
      MIPS: Delete unused flush_cache_sigtramp()
      MIPS: CM: Fix indentation
      MIPS: eBPF: Always return sign extended 32b values
      MIPS: eBPF: Remove REG_32BIT_ZERO_EX
      MIPS: dma-noncoherent: Remove bogus condition in dma_sync_phys()

Paul Cercueil (1):
      MIPS: ingenic: Add support for appended devicetree

Rafał Miłecki (1):
      MIPS: BCM47XX: Fix/improve Buffalo WHR-G54S support

Thomas Bogendoerfer (6):
      MIPS: SGI-IP27: get rid of volatile and hubreg_t
      MIPS: SGI-IP27: clean up bridge access and header files
      MIPS: SGI-IP27: use pr_info/pr_emerg and pr_cont to fix output
      MIPS: SGI-IP27: do xtalk scanning later
      MIPS: SGI-IP27: do boot CPU init later
      MIPS: SGI-IP27: rework HUB interrupts

 .../devicetree/bindings/mips/lantiq/rcu-gphy.txt   |  36 ---
 .../devicetree/bindings/mips/lantiq/rcu.txt        |  18 --
 arch/mips/Kconfig                                  |  13 +-
 arch/mips/Makefile                                 |   2 +
 arch/mips/ath79/Kconfig                            |  73 -----
 arch/mips/ath79/Makefile                           |  23 +-
 arch/mips/ath79/clock.c                            | 342 +++++++++-----------
 arch/mips/ath79/common.h                           |   5 -
 arch/mips/ath79/dev-common.c                       | 159 ---------
 arch/mips/ath79/dev-common.h                       |  18 --
 arch/mips/ath79/dev-gpio-buttons.c                 |  56 ----
 arch/mips/ath79/dev-gpio-buttons.h                 |  23 --
 arch/mips/ath79/dev-leds-gpio.c                    |  54 ----
 arch/mips/ath79/dev-leds-gpio.h                    |  21 --
 arch/mips/ath79/dev-spi.c                          |  38 ---
 arch/mips/ath79/dev-spi.h                          |  22 --
 arch/mips/ath79/dev-usb.c                          | 242 --------------
 arch/mips/ath79/dev-usb.h                          |  17 -
 arch/mips/ath79/dev-wmac.c                         | 155 ---------
 arch/mips/ath79/dev-wmac.h                         |  17 -
 arch/mips/ath79/irq.c                              | 169 ----------
 arch/mips/ath79/mach-ap121.c                       |  92 ------
 arch/mips/ath79/mach-ap136.c                       | 156 ---------
 arch/mips/ath79/mach-ap81.c                        | 100 ------
 arch/mips/ath79/mach-db120.c                       | 136 --------
 arch/mips/ath79/mach-pb44.c                        | 128 --------
 arch/mips/ath79/mach-ubnt-xm.c                     | 126 --------
 arch/mips/ath79/machtypes.h                        |  28 --
 arch/mips/ath79/pci.c                              | 273 ----------------
 arch/mips/ath79/pci.h                              |  35 --
 arch/mips/ath79/setup.c                            |  78 +----
 arch/mips/bcm47xx/buttons.c                        |   2 +-
 arch/mips/bcm47xx/leds.c                           |  10 +-
 arch/mips/boot/dts/cavium-octeon/octeon_3xxx.dts   |  14 +
 arch/mips/boot/dts/cavium-octeon/ubnt_e100.dts     |   6 +
 .../cavium-octeon/executive/cvmx-helper-board.c    |  86 +----
 arch/mips/cavium-octeon/executive/cvmx-helper.c    |  39 +--
 arch/mips/cavium-octeon/oct_ilm.c                  |  32 +-
 arch/mips/cavium-octeon/octeon-platform.c          |  64 ++++
 arch/mips/configs/xway_defconfig                   |   1 -
 arch/mips/include/asm/Kbuild                       |   1 -
 arch/mips/include/asm/barrier.h                    |  19 ++
 arch/mips/include/asm/cacheflush.h                 |   2 -
 arch/mips/include/asm/cmpxchg.h                    | 104 +++++-
 arch/mips/include/asm/cpu-features.h               |  13 +
 arch/mips/include/asm/cpu.h                        |   1 +
 arch/mips/include/asm/ginvt.h                      |  56 ++++
 arch/mips/include/asm/irqflags.h                   |   2 +-
 arch/mips/include/asm/mach-ath79/ath79.h           |   4 -
 arch/mips/include/asm/mach-ip27/irq.h              |  12 +-
 arch/mips/include/asm/mach-ip27/mmzone.h           |   9 -
 arch/mips/include/asm/mach-loongson32/platform.h   |   4 -
 arch/mips/include/asm/mipsregs.h                   |  11 +
 arch/mips/include/asm/mmu.h                        |   6 +-
 arch/mips/include/asm/mmu_context.h                | 139 ++++----
 arch/mips/include/asm/octeon/cvmx-helper-board.h   |  12 -
 arch/mips/include/asm/octeon/cvmx-smix-defs.h      | 276 ----------------
 arch/mips/include/asm/pci/bridge.h                 | 206 ++++++------
 arch/mips/include/asm/pgtable.h                    |  49 +--
 arch/mips/include/asm/smp-ops.h                    |   1 +
 arch/mips/include/asm/sn/addrs.h                   |  72 +----
 arch/mips/include/asm/sn/arch.h                    |   2 -
 arch/mips/include/asm/sn/io.h                      |   2 +-
 arch/mips/include/asm/sn/sn0/addrs.h               |   5 -
 arch/mips/include/asm/tlbflush.h                   |   5 +-
 arch/mips/jz4740/setup.c                           |  14 +-
 arch/mips/kernel/cpu-probe.c                       |  55 +++-
 arch/mips/kernel/irq.c                             |   4 +-
 arch/mips/kernel/mips-cm.c                         |   4 +-
 arch/mips/kernel/mips-r2-to-r6-emul.c              |  21 +-
 arch/mips/kernel/segment.c                         |  15 +-
 arch/mips/kernel/setup.c                           |   7 +-
 arch/mips/kernel/smp.c                             |  69 +++-
 arch/mips/kernel/spinlock_test.c                   |  21 +-
 arch/mips/kernel/traps.c                           |   4 +-
 arch/mips/kernel/unaligned.c                       |  17 +-
 arch/mips/kvm/emulate.c                            |   8 +-
 arch/mips/kvm/mips.c                               |   5 +
 arch/mips/kvm/trap_emul.c                          |  30 +-
 arch/mips/kvm/vz.c                                 |   8 +-
 arch/mips/lantiq/Kconfig                           |   4 -
 arch/mips/lib/dump_tlb.c                           |  22 +-
 arch/mips/loongson32/Kconfig                       |   2 -
 arch/mips/loongson32/Platform                      |   4 +-
 arch/mips/loongson32/common/platform.c             |  63 ----
 arch/mips/loongson32/ls1b/board.c                  |  28 --
 arch/mips/math-emu/me-debugfs.c                    |  23 +-
 arch/mips/mm/Makefile                              |  16 +-
 arch/mips/mm/c-octeon.c                            |  18 --
 arch/mips/mm/c-r3k.c                               |  25 --
 arch/mips/mm/c-r4k.c                               | 124 +------
 arch/mips/mm/c-tx39.c                              |  21 --
 arch/mips/mm/cache.c                               |   1 -
 arch/mips/mm/context.c                             | 291 +++++++++++++++++
 arch/mips/mm/dma-noncoherent.c                     |   9 +-
 arch/mips/mm/init.c                                |   7 +
 arch/mips/mm/sc-debugfs.c                          |  15 +-
 arch/mips/mm/tlb-r3k.c                             |  14 +-
 arch/mips/mm/tlb-r4k.c                             |  71 ++--
 arch/mips/mm/tlb-r8k.c                             |  10 +-
 arch/mips/net/ebpf_jit.c                           |  24 +-
 arch/mips/pci/Makefile                             |   1 +
 arch/mips/pci/fixup-ath79.c                        |  21 ++
 arch/mips/pci/ops-bridge.c                         |  68 ++--
 arch/mips/pci/pci-ip27.c                           |  49 +--
 arch/mips/ralink/bootrom.c                         |   8 +-
 arch/mips/sgi-ip27/Makefile                        |   3 +-
 arch/mips/sgi-ip27/ip27-hubio.c                    |   4 +-
 arch/mips/sgi-ip27/ip27-init.c                     |  39 +--
 arch/mips/sgi-ip27/ip27-irq-pci.c                  | 266 ---------------
 arch/mips/sgi-ip27/ip27-irq.c                      | 357 ++++++++++++++-------
 arch/mips/sgi-ip27/ip27-irqno.c                    |  48 ---
 arch/mips/sgi-ip27/ip27-memory.c                   |  34 +-
 arch/mips/sgi-ip27/ip27-nmi.c                      |  64 ++--
 arch/mips/sgi-ip27/ip27-smp.c                      |   5 +-
 arch/mips/sgi-ip27/ip27-timer.c                    |  42 +--
 arch/mips/sgi-ip27/ip27-xtalk.c                    |  13 +-
 drivers/soc/lantiq/Makefile                        |   1 -
 drivers/soc/lantiq/gphy.c                          | 224 -------------
 include/dt-bindings/clock/ath79-clk.h              |   4 +-
 120 files changed, 1622 insertions(+), 4625 deletions(-)
 delete mode 100644 Documentation/devicetree/bindings/mips/lantiq/rcu-gphy.txt
 delete mode 100644 arch/mips/ath79/dev-common.c
 delete mode 100644 arch/mips/ath79/dev-common.h
 delete mode 100644 arch/mips/ath79/dev-gpio-buttons.c
 delete mode 100644 arch/mips/ath79/dev-gpio-buttons.h
 delete mode 100644 arch/mips/ath79/dev-leds-gpio.c
 delete mode 100644 arch/mips/ath79/dev-leds-gpio.h
 delete mode 100644 arch/mips/ath79/dev-spi.c
 delete mode 100644 arch/mips/ath79/dev-spi.h
 delete mode 100644 arch/mips/ath79/dev-usb.c
 delete mode 100644 arch/mips/ath79/dev-usb.h
 delete mode 100644 arch/mips/ath79/dev-wmac.c
 delete mode 100644 arch/mips/ath79/dev-wmac.h
 delete mode 100644 arch/mips/ath79/irq.c
 delete mode 100644 arch/mips/ath79/mach-ap121.c
 delete mode 100644 arch/mips/ath79/mach-ap136.c
 delete mode 100644 arch/mips/ath79/mach-ap81.c
 delete mode 100644 arch/mips/ath79/mach-db120.c
 delete mode 100644 arch/mips/ath79/mach-pb44.c
 delete mode 100644 arch/mips/ath79/mach-ubnt-xm.c
 delete mode 100644 arch/mips/ath79/machtypes.h
 delete mode 100644 arch/mips/ath79/pci.c
 delete mode 100644 arch/mips/ath79/pci.h
 create mode 100644 arch/mips/include/asm/ginvt.h
 delete mode 100644 arch/mips/include/asm/octeon/cvmx-smix-defs.h
 create mode 100644 arch/mips/mm/context.c
 create mode 100644 arch/mips/pci/fixup-ath79.c
 delete mode 100644 arch/mips/sgi-ip27/ip27-irq-pci.c
 delete mode 100644 arch/mips/sgi-ip27/ip27-irqno.c
 delete mode 100644 drivers/soc/lantiq/gphy.c

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 228 bytes --]

             reply	other threads:[~2019-03-05  0:30 UTC|newest]

Thread overview: 3+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-03-05  0:29 Paul Burton [this message]
2019-03-05 18:08 ` [GIT PULL] Main MIPS pull request for 5.1 Paul Burton
2019-03-05 19:35 ` pr-tracker-bot

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20190305002951.jdrcgn5jf5xoa5rr@pburton-laptop \
    --to=paul.burton@mips.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mips@vger.kernel.org \
    --cc=torvalds@linux-foundation.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).