From: Dan Murphy <dmurphy@ti.com>
To: <robh+dt@kernel.org>, <jacek.anaszewski@gmail.com>,
<pavel@ucw.cz>, <tony@atomide.com>, <lee.jones@linaro.org>
Cc: <devicetree@vger.kernel.org>, <linux-kernel@vger.kernel.org>,
<linux-leds@vger.kernel.org>, Dan Murphy <dmurphy@ti.com>
Subject: [PATCH v2 2/4] ARM: dts: omap4-droid4: Update backlight dt properties
Date: Fri, 8 Mar 2019 14:09:10 -0600 [thread overview]
Message-ID: <20190308200912.28163-2-dmurphy@ti.com> (raw)
In-Reply-To: <20190308200912.28163-1-dmurphy@ti.com>
Update the properties for the lm3532 device node for droid4.
With this change the backlight LED string and the keypad
LED strings will be controlled separately.
Signed-off-by: Dan Murphy <dmurphy@ti.com>
---
v2 - Fixed ramp-up and ramp-down properties, removed hard coded property values,
I did not change the label as it is undecided what it could be - https://lore.kernel.org/patchwork/patch/1048806/
arch/arm/boot/dts/omap4-droid4-xt894.dts | 26 ++++++++++++++++--------
1 file changed, 18 insertions(+), 8 deletions(-)
diff --git a/arch/arm/boot/dts/omap4-droid4-xt894.dts b/arch/arm/boot/dts/omap4-droid4-xt894.dts
index e21ec929f096..71e1a90dfe4d 100644
--- a/arch/arm/boot/dts/omap4-droid4-xt894.dts
+++ b/arch/arm/boot/dts/omap4-droid4-xt894.dts
@@ -383,20 +383,30 @@
};
&i2c1 {
- lm3532@38 {
+ led-controller@38 {
compatible = "ti,lm3532";
+ #address-cells = <1>;
+ #size-cells = <0>;
reg = <0x38>;
enable-gpios = <&gpio6 12 GPIO_ACTIVE_HIGH>;
- lcd_backlight: backlight {
- compatible = "ti,lm3532-backlight";
+ ramp-up-us = <1024>;
+ ramp-down-us = <8193>;
- lcd {
- led-sources = <0 1 2>;
- ramp-up-msec = <1>;
- ramp-down-msec = <0>;
- };
+ lcd_backlight: led@0 {
+ reg = <0>;
+ led-sources = <2>;
+ ti,led-mode = <0>;
+ label = "backlight";
+ linux,default-trigger = "backlight";
+ };
+
+ led@1 {
+ reg = <1>;
+ led-sources = <1>;
+ ti,led-mode = <0>;
+ label = "keypad";
};
};
};
--
2.20.1.390.gb5101f9297
next prev parent reply other threads:[~2019-03-08 20:09 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-03-08 20:09 [PATCH v2 1/4] dt: lm3532: Add lm3532 dt doc and update ti_lmu doc Dan Murphy
2019-03-08 20:09 ` Dan Murphy [this message]
2019-03-08 20:09 ` [PATCH v2 3/4] mfd: ti-lmu: Remove LM3532 backlight driver references Dan Murphy
2019-03-08 20:09 ` [PATCH v2 4/4] leds: lm3532: Introduce the lm3532 LED driver Dan Murphy
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190308200912.28163-2-dmurphy@ti.com \
--to=dmurphy@ti.com \
--cc=devicetree@vger.kernel.org \
--cc=jacek.anaszewski@gmail.com \
--cc=lee.jones@linaro.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-leds@vger.kernel.org \
--cc=pavel@ucw.cz \
--cc=robh+dt@kernel.org \
--cc=tony@atomide.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).