From: Matthias Kaehlcke <mka@chromium.org>
To: Marcel Holtmann <marcel@holtmann.org>,
Johan Hedberg <johan.hedberg@gmail.com>
Cc: linux-bluetooth@vger.kernel.org, linux-kernel@vger.kernel.org,
Balakrishna Godavarthi <bgodavar@codeaurora.org>,
Hemantg <hemantg@codeaurora.org>,
Rocky Liao <rjliao@codeaurora.org>,
Harish Bandi <c-hbandi@codeaurora.org>,
Matthias Kaehlcke <mka@chromium.org>
Subject: [PATCH v2 1/2] Bluetooth: hci_qca: Rename STATE_<flags> to QCA_<flags>
Date: Tue, 12 Mar 2019 13:42:21 -0700 [thread overview]
Message-ID: <CAG5bF+RLTaYbrn8uSpoU+W=PBmNawR6Ov0EOEcfuSymzuini5w@mail.gmail.com> (raw)
In-Reply-To: <20190312204217.73296-1-mka@chromium.org>
Rename STATE_IN_BAND_SLEEP_ENABLED to QCA_IN_BAND_SLEEP_ENABLED.
The constant represents a flag (multiple flags can be set at once),
not a unique state of the controller or driver.
Also make the flag an enum value instead of a pre-processor constant
(more flags will be added to the enum group by another patch).
Signed-off-by: Matthias Kaehlcke <mka@chromium.org>
---
Changes in v2:
- don't use BIT()
- change to enum type
- updated commit message
---
drivers/bluetooth/hci_qca.c | 15 ++++++++-------
1 file changed, 8 insertions(+), 7 deletions(-)
diff --git a/drivers/bluetooth/hci_qca.c b/drivers/bluetooth/hci_qca.c
index 237aea34b69f..1b7ba9e9e08a 100644
--- a/drivers/bluetooth/hci_qca.c
+++ b/drivers/bluetooth/hci_qca.c
@@ -54,9 +54,6 @@
#define HCI_IBS_WAKE_ACK 0xFC
#define HCI_MAX_IBS_SIZE 10
-/* Controller states */
-#define STATE_IN_BAND_SLEEP_ENABLED 1
-
#define IBS_WAKE_RETRANS_TIMEOUT_MS 100
#define IBS_TX_IDLE_TIMEOUT_MS 2000
#define CMD_TRANS_TIMEOUT_MS 100
@@ -67,6 +64,10 @@
/* Controller debug log header */
#define QCA_DEBUG_HANDLE 0x2EDC
+enum qca_flags {
+ QCA_IN_BAND_SLEEP_ENABLED,
+};
+
/* HCI_IBS transmit side sleep protocol states */
enum tx_ibs_states {
HCI_IBS_TX_ASLEEP,
@@ -775,7 +776,7 @@ static int qca_enqueue(struct hci_uart *hu, struct
sk_buff *skb)
/* Don't go to sleep in middle of patch download or
* Out-Of-Band(GPIOs control) sleep is selected.
*/
- if (!test_bit(STATE_IN_BAND_SLEEP_ENABLED, &qca->flags)) {
+ if (!test_bit(QCA_IN_BAND_SLEEP_ENABLED, &qca->flags)) {
skb_queue_tail(&qca->txq, skb);
spin_unlock_irqrestore(&qca->hci_ibs_lock, flags);
return 0;
@@ -1192,7 +1193,7 @@ static int qca_setup(struct hci_uart *hu)
return ret;
/* Patch downloading has to be done without IBS mode */
- clear_bit(STATE_IN_BAND_SLEEP_ENABLED, &qca->flags);
+ clear_bit(QCA_IN_BAND_SLEEP_ENABLED, &qca->flags);
if (qcadev->btsoc_type == QCA_WCN3990) {
bt_dev_info(hdev, "setting up wcn3990");
@@ -1236,7 +1237,7 @@ static int qca_setup(struct hci_uart *hu)
/* Setup patch / NVM configurations */
ret = qca_uart_setup(hdev, qca_baudrate, qcadev->btsoc_type, soc_ver);
if (!ret) {
- set_bit(STATE_IN_BAND_SLEEP_ENABLED, &qca->flags);
+ set_bit(QCA_IN_BAND_SLEEP_ENABLED, &qca->flags);
qca_debugfs_init(hdev);
} else if (ret == -ENOENT) {
/* No patch/nvm-config found, run with original fw/config */
@@ -1294,7 +1295,7 @@ static void qca_power_shutdown(struct hci_uart *hu)
* data in skb's.
*/
spin_lock_irqsave(&qca->hci_ibs_lock, flags);
- clear_bit(STATE_IN_BAND_SLEEP_ENABLED, &qca->flags);
+ clear_bit(QCA_IN_BAND_SLEEP_ENABLED, &qca->flags);
qca_flush(hu);
spin_unlock_irqrestore(&qca->hci_ibs_lock, flags);
--
2.21.0.360.g471c308f928-goog
next parent reply other threads:[~2019-03-12 20:42 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <20190312204217.73296-1-mka@chromium.org>
2019-03-12 20:42 ` Matthias Kaehlcke [this message]
2019-04-01 7:46 ` [PATCH v2 1/2] Bluetooth: hci_qca: Rename STATE_<flags> to QCA_<flags> Balakrishna Godavarthi
2019-04-01 21:30 ` Matthias Kaehlcke
2019-03-12 20:42 ` [PATCH v2 2/2] Bluetooth: hci_qca: wcn3990: Drop baudrate change vendor event Matthias Kaehlcke
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to='CAG5bF+RLTaYbrn8uSpoU+W=PBmNawR6Ov0EOEcfuSymzuini5w@mail.gmail.com' \
--to=mka@chromium.org \
--cc=bgodavar@codeaurora.org \
--cc=c-hbandi@codeaurora.org \
--cc=hemantg@codeaurora.org \
--cc=johan.hedberg@gmail.com \
--cc=linux-bluetooth@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=marcel@holtmann.org \
--cc=rjliao@codeaurora.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).