[v4,2/4] ARM: dts: omap4-droid4: Update backlight dt properties
diff mbox series

Message ID 20190313123249.17258-2-dmurphy@ti.com
State New, archived
Headers show
Series
  • [v4,1/4] dt: lm3532: Add lm3532 dt doc and update ti_lmu doc
Related show

Commit Message

Dan Murphy March 13, 2019, 12:32 p.m. UTC
Update the properties for the lm3532 device node for droid4.
With this change the backlight LED string and the keypad
LED strings will be controlled separately.

Signed-off-by: Dan Murphy <dmurphy@ti.com>
---

v4 - No change - https://lore.kernel.org/patchwork/patch/1050125/

v3 - updated keypad label on v1 comment - https://lore.kernel.org/patchwork/patch/1049023/
v2 - Fixed ramp-up and ramp-down properties, removed hard coded property values,
I did not change the label as it is undecided what it could be - https://lore.kernel.org/patchwork/patch/1048806/

 arch/arm/boot/dts/omap4-droid4-xt894.dts | 26 ++++++++++++++++--------
 1 file changed, 18 insertions(+), 8 deletions(-)

Patch
diff mbox series

diff --git a/arch/arm/boot/dts/omap4-droid4-xt894.dts b/arch/arm/boot/dts/omap4-droid4-xt894.dts
index e21ec929f096..aea206f04f76 100644
--- a/arch/arm/boot/dts/omap4-droid4-xt894.dts
+++ b/arch/arm/boot/dts/omap4-droid4-xt894.dts
@@ -383,20 +383,30 @@ 
 };
 
 &i2c1 {
-	lm3532@38 {
+	led-controller@38 {
 		compatible = "ti,lm3532";
+		#address-cells = <1>;
+		#size-cells = <0>;
 		reg = <0x38>;
 
 		enable-gpios = <&gpio6 12 GPIO_ACTIVE_HIGH>;
 
-		lcd_backlight: backlight {
-			compatible = "ti,lm3532-backlight";
+		ramp-up-us = <1024>;
+		ramp-down-us = <8193>;
 
-			lcd {
-				led-sources = <0 1 2>;
-				ramp-up-msec = <1>;
-				ramp-down-msec = <0>;
-			};
+		lcd_backlight: led@0 {
+			reg = <0>;
+			led-sources = <2>;
+			ti,led-mode = <0>;
+			label = "backlight";
+			linux,default-trigger = "backlight";
+		};
+
+		led@1 {
+			reg = <1>;
+			led-sources = <1>;
+			ti,led-mode = <0>;
+			label = "platform::kbd_backlight";
 		};
 	};
 };