[PATCH v4 07/11] ARM: davinci: dm355: switch to using the clocksource driver

From: Bartosz Golaszewski <brgl@bgdev.pl>
To: Sekhar Nori <nsekhar@ti.com>, Kevin Hilman <khilman@kernel.org>,
	Daniel Lezcano <daniel.lezcano@linaro.org>,
	Thomas Gleixner <tglx@linutronix.de>,
	David Lechner <david@lechnology.com>
Cc: linux-arm-kernel@lists.infradead.org,
	linux-kernel@vger.kernel.org,
	Bartosz Golaszewski <bgolaszewski@baylibre.com>
Subject: [PATCH v4 07/11] ARM: davinci: dm355: switch to using the clocksource driver
Date: Mon, 18 Mar 2019 13:10:56 +0100	[thread overview]
Message-ID: <20190318121100.28132-8-brgl@bgdev.pl> (raw)
In-Reply-To: <20190318121100.28132-1-brgl@bgdev.pl>

From: Bartosz Golaszewski <bgolaszewski@baylibre.com>

We now have a proper clocksource driver for davinci. Switch the dm355
platform to using it.

Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Reviewed-by: David Lechner <david@lechnology.com>
---
 arch/arm/mach-davinci/dm355.c | 24 +++++++++++++-----------
 1 file changed, 13 insertions(+), 11 deletions(-)

diff --git a/arch/arm/mach-davinci/dm355.c b/arch/arm/mach-davinci/dm355.c
index 57c5a660758e..d871172f74c2 100644
--- a/arch/arm/mach-davinci/dm355.c
+++ b/arch/arm/mach-davinci/dm355.c
@@ -29,7 +29,8 @@
 #include <mach/cputype.h>
 #include <mach/mux.h>
 #include <mach/serial.h>
-#include <mach/time.h>
+
+#include <clocksource/timer-davinci.h>
 
 #include "asp.h"
 #include "davinci.h"
@@ -619,15 +620,15 @@ static struct davinci_id dm355_ids[] = {
 };
 
 /*
- * T0_BOT: Timer 0, bottom:  clockevent source for hrtimers
- * T0_TOP: Timer 0, top   :  clocksource for generic timekeeping
- * T1_BOT: Timer 1, bottom:  (used by DSP in TI DSPLink code)
- * T1_TOP: Timer 1, top   :  <unused>
+ * Bottom half of timer0 is used for clockevent, top half is used for
+ * clocksource.
  */
-static struct davinci_timer_info dm355_timer_info = {
-	.timers		= davinci_timer_instance,
-	.clockevent_id	= T0_BOT,
-	.clocksource_id	= T0_TOP,
+static const struct davinci_timer_cfg dm355_timer_cfg = {
+	.reg = DEFINE_RES_IO(DAVINCI_TIMER0_BASE, SZ_4K),
+	.irq = {
+		DEFINE_RES_IRQ(DAVINCI_INTC_IRQ(IRQ_TINT0_TINT12)),
+		DEFINE_RES_IRQ(DAVINCI_INTC_IRQ(IRQ_TINT0_TINT34)),
+	},
 };
 
 static struct plat_serial8250_port dm355_serial0_platform_data[] = {
@@ -705,7 +706,6 @@ static const struct davinci_soc_info davinci_soc_info_dm355 = {
 	.pinmux_base		= DAVINCI_SYSTEM_MODULE_BASE,
 	.pinmux_pins		= dm355_pins,
 	.pinmux_pins_num	= ARRAY_SIZE(dm355_pins),
-	.timer_info		= &dm355_timer_info,
 	.sram_dma		= 0x00010000,
 	.sram_len		= SZ_32K,
 };
@@ -732,6 +732,7 @@ void __init dm355_init_time(void)
 {
 	void __iomem *pll1, *psc;
 	struct clk *clk;
+	int rv;
 
 	clk_register_fixed_rate(NULL, "ref_clk", NULL, 0, DM355_REF_FREQ);
 
@@ -747,7 +748,8 @@ void __init dm355_init_time(void)
 		return;
 	}
 
-	davinci_timer_init(clk);
+	rv = davinci_timer_register(clk, &dm355_timer_cfg);
+	WARN(rv, "Unable to register the timer: %d\n", rv);
 }
 
 static struct resource dm355_pll2_resources[] = {
-- 
2.20.1

