From: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
To: MyungJoo Ham <myungjoo.ham@samsung.com>,
Chanwoo Choi <cw00.choi@samsung.com>,
linux-kernel@vger.kernel.org, Hans de Goede <hdegoede@redhat.com>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Subject: [PATCH v2 1/2] extcon: intel: Split out some definitions to a common header
Date: Tue, 19 Mar 2019 16:30:41 +0200 [thread overview]
Message-ID: <20190319143042.66606-2-andriy.shevchenko@linux.intel.com> (raw)
In-Reply-To: <20190319143042.66606-1-andriy.shevchenko@linux.intel.com>
We are going to use some definitions in the other Intel extcon drivers,
thus, split out them to a common header file.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
---
drivers/extcon/extcon-intel-cht-wc.c | 21 +++++++--------------
drivers/extcon/extcon-intel.h | 20 ++++++++++++++++++++
2 files changed, 27 insertions(+), 14 deletions(-)
create mode 100644 drivers/extcon/extcon-intel.h
diff --git a/drivers/extcon/extcon-intel-cht-wc.c b/drivers/extcon/extcon-intel-cht-wc.c
index 53b28ecc4ad1..9d32150e68db 100644
--- a/drivers/extcon/extcon-intel-cht-wc.c
+++ b/drivers/extcon/extcon-intel-cht-wc.c
@@ -17,6 +17,8 @@
#include <linux/regmap.h>
#include <linux/slab.h>
+#include "extcon-intel.h"
+
#define CHT_WC_PHYCTRL 0x5e07
#define CHT_WC_CHGRCTRL0 0x5e16
@@ -80,15 +82,6 @@
#define CHT_WC_VBUS_GPIO_CTLO_DRV_OD BIT(4)
#define CHT_WC_VBUS_GPIO_CTLO_DIR_OUT BIT(5)
-enum cht_wc_usb_id {
- USB_ID_OTG,
- USB_ID_GND,
- USB_ID_FLOAT,
- USB_RID_A,
- USB_RID_B,
- USB_RID_C,
-};
-
enum cht_wc_mux_select {
MUX_SEL_PMIC = 0,
MUX_SEL_SOC,
@@ -116,9 +109,9 @@ static int cht_wc_extcon_get_id(struct cht_wc_extcon_data *ext, int pwrsrc_sts)
{
switch ((pwrsrc_sts & CHT_WC_PWRSRC_USBID_MASK) >> CHT_WC_PWRSRC_USBID_SHIFT) {
case CHT_WC_PWRSRC_RID_GND:
- return USB_ID_GND;
+ return INTEL_USB_ID_GND;
case CHT_WC_PWRSRC_RID_FLOAT:
- return USB_ID_FLOAT;
+ return INTEL_USB_ID_FLOAT;
case CHT_WC_PWRSRC_RID_ACA:
default:
/*
@@ -126,7 +119,7 @@ static int cht_wc_extcon_get_id(struct cht_wc_extcon_data *ext, int pwrsrc_sts)
* the USBID GPADC channel here and determine ACA role
* based on that.
*/
- return USB_ID_FLOAT;
+ return INTEL_USB_ID_FLOAT;
}
}
@@ -260,7 +253,7 @@ static void cht_wc_extcon_pwrsrc_event(struct cht_wc_extcon_data *ext)
}
id = cht_wc_extcon_get_id(ext, pwrsrc_sts);
- if (id == USB_ID_GND) {
+ if (id == INTEL_USB_ID_GND) {
cht_wc_extcon_enable_charging(ext, false);
cht_wc_extcon_set_otgmode(ext, true);
@@ -293,7 +286,7 @@ static void cht_wc_extcon_pwrsrc_event(struct cht_wc_extcon_data *ext)
ext->previous_cable = cable;
}
- ext->usb_host = ((id == USB_ID_GND) || (id == USB_RID_A));
+ ext->usb_host = ((id == INTEL_USB_ID_GND) || (id == INTEL_USB_RID_A));
extcon_set_state_sync(ext->edev, EXTCON_USB_HOST, ext->usb_host);
}
diff --git a/drivers/extcon/extcon-intel.h b/drivers/extcon/extcon-intel.h
new file mode 100644
index 000000000000..0ad645ec7b33
--- /dev/null
+++ b/drivers/extcon/extcon-intel.h
@@ -0,0 +1,20 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Header file for Intel extcon hardware
+ *
+ * Copyright (C) 2019 Intel Corporation. All rights reserved.
+ */
+
+#ifndef __EXTCON_INTEL_H__
+#define __EXTCON_INTEL_H__
+
+enum extcon_intel_usb_id {
+ INTEL_USB_ID_OTG,
+ INTEL_USB_ID_GND,
+ INTEL_USB_ID_FLOAT,
+ INTEL_USB_RID_A,
+ INTEL_USB_RID_B,
+ INTEL_USB_RID_C,
+};
+
+#endif /* __EXTCON_INTEL_H__ */
--
2.20.1
next prev parent reply other threads:[~2019-03-19 14:30 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <CGME20190319143051epcas2p3d606ab8e344a2dc5c01e969d3cbfd024@epcas2p3.samsung.com>
2019-03-19 14:30 ` [PATCH v2 0/2] extcon: Introduce support of Basin Cove PMIC Andy Shevchenko
2019-03-19 14:30 ` Andy Shevchenko [this message]
2019-03-19 14:30 ` [PATCH v2 2/2] extcon: mrfld: Introduce extcon driver for " Andy Shevchenko
2019-03-21 1:39 ` [PATCH v2 0/2] extcon: Introduce support of " Chanwoo Choi
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190319143042.66606-2-andriy.shevchenko@linux.intel.com \
--to=andriy.shevchenko@linux.intel.com \
--cc=cw00.choi@samsung.com \
--cc=hdegoede@redhat.com \
--cc=linux-kernel@vger.kernel.org \
--cc=myungjoo.ham@samsung.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).