From: Steve Twiss <stwiss.opensource@diasemi.com>
To: Rob Herring <robh+dt@kernel.org>,
Mark Rutland <mark.rutland@arm.com>,
Shawn Guo <shawnguo@kernel.org>,
Sascha Hauer <s.hauer@pengutronix.de>,
Pengutronix Kernel Team <kernel@pengutronix.de>,
Fabio Estevam <festevam@gmail.com>,
NXP Linux Team <linux-imx@nxp.com>
Cc: DEVICETREE <devicetree@vger.kernel.org>,
LINUX-ARM-KERNEL <linux-arm-kernel@lists.infradead.org>,
LKML <linux-kernel@vger.kernel.org>,
Dialog Opensource Support <support.opensource@diasemi.com>
Subject: [PATCH] ARM: dts: imx6qdl-sabresd: change phy-mode to use rgmii-id
Date: Wed, 20 Mar 2019 11:03:50 +0000 [thread overview]
Message-ID: <20190320120604.7D99B3FBE9@swsrvapps-01.diasemi.com> (raw)
The PHY used on the Freescale i.MX6Q/DL SABRE boards is qualified as
'rgmii' instead of 'rgmii-id'. Meaning the RX and TX delays that were
previously added by the MAC when required, but are now provided
internally by the PHY (and the MAC should no longer add the RX or TX
delays in this case).
This patch fixes the network problems seen on the Freescale i.MX6Q/DL
SABRE boards and makes a difference when correctly loading the NFS
rootfs on startup.
Link: https://lkml.kernel.org/r/1397569821-5530-4-git-send-email-thomas.petazzoni@free-electrons.com
Tested-by: Steve Twiss <stwiss.opensource@diasemi.com>
Tested-by: Adam Thomson <Adam.Thomson@diasemi.com>
Signed-off-by: Steve Twiss <stwiss.opensource@diasemi.com>
---
arch/arm/boot/dts/imx6qdl-sabresd.dtsi | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm/boot/dts/imx6qdl-sabresd.dtsi b/arch/arm/boot/dts/imx6qdl-sabresd.dtsi
index a070506..185fb17 100644
--- a/arch/arm/boot/dts/imx6qdl-sabresd.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-sabresd.dtsi
@@ -202,7 +202,7 @@
&fec {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_enet>;
- phy-mode = "rgmii";
+ phy-mode = "rgmii-id";
phy-reset-gpios = <&gpio1 25 GPIO_ACTIVE_LOW>;
status = "okay";
};
--
1.9.3
next reply other threads:[~2019-03-20 12:06 UTC|newest]
Thread overview: 17+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-03-20 11:03 Steve Twiss [this message]
2019-03-20 12:16 ` [PATCH] ARM: dts: imx6qdl-sabresd: change phy-mode to use rgmii-id Fabio Estevam
2019-03-20 16:03 ` Steve Twiss
2019-03-20 17:04 ` Fabio Estevam
2019-03-21 8:42 ` Abel Vesa
2019-03-21 11:17 ` Fabio Estevam
2019-03-21 11:32 ` Steve Twiss
2019-03-21 11:50 ` Andrew Lunn
2019-03-21 11:45 ` Andrew Lunn
2019-03-21 12:43 ` Lucas Stach
2019-03-22 1:11 ` Shawn Guo
2019-03-22 2:00 ` Fabio Estevam
2019-03-22 2:15 ` Shawn Guo
2019-03-22 2:24 ` Fabio Estevam
2019-03-22 10:20 ` Michal Vokáč
2019-03-22 10:50 ` Steve Twiss
2019-03-22 10:59 ` Andrew Lunn
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190320120604.7D99B3FBE9@swsrvapps-01.diasemi.com \
--to=stwiss.opensource@diasemi.com \
--cc=devicetree@vger.kernel.org \
--cc=festevam@gmail.com \
--cc=kernel@pengutronix.de \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-imx@nxp.com \
--cc=linux-kernel@vger.kernel.org \
--cc=mark.rutland@arm.com \
--cc=robh+dt@kernel.org \
--cc=s.hauer@pengutronix.de \
--cc=shawnguo@kernel.org \
--cc=support.opensource@diasemi.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).