From: Arnd Bergmann <arnd@arndb.de>
To: stable@vger.kernel.org, Ulf Hansson <ulf.hansson@linaro.org>,
Shawn Lin <shawn.lin@rock-chips.com>,
Avri Altman <avri.altman@wdc.com>,
Ritesh Harjani <riteshh@codeaurora.org>,
Jiong Wu <lohengrin1024@gmail.com>, Martin Hicks <mort@bork.org>
Cc: Ziyuan Xu <xzy.xu@rock-chips.com>, Arnd Bergmann <arnd@arndb.de>,
Wolfram Sang <wsa+renesas@sang-engineering.com>,
linux-mmc@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: [BACKPORT 4.4.y 17/25] mmc: core: don't try to switch block size for dual rate mode
Date: Fri, 22 Mar 2019 16:44:08 +0100 [thread overview]
Message-ID: <20190322154425.3852517-18-arnd@arndb.de> (raw)
In-Reply-To: <20190322154425.3852517-1-arnd@arndb.de>
From: Ziyuan Xu <xzy.xu@rock-chips.com>
Per spec, block size should always be 512 bytes for dual rate mode,
so any attempts to switch the block size under dual rate mode should
be neglected.
Signed-off-by: Ziyuan Xu <xzy.xu@rock-chips.com>
Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
(cherry picked from commit 1712c9373f98ae8ed41599a8d7841a6fba29c264)
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
---
drivers/mmc/core/core.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/drivers/mmc/core/core.c b/drivers/mmc/core/core.c
index df074f8c7cb7..3e17268b9994 100644
--- a/drivers/mmc/core/core.c
+++ b/drivers/mmc/core/core.c
@@ -2406,7 +2406,8 @@ int mmc_set_blocklen(struct mmc_card *card, unsigned int blocklen)
{
struct mmc_command cmd = {0};
- if (mmc_card_blockaddr(card) || mmc_card_ddr52(card))
+ if (mmc_card_blockaddr(card) || mmc_card_ddr52(card) ||
+ mmc_card_hs400(card) || mmc_card_hs400es(card))
return 0;
cmd.opcode = MMC_SET_BLOCKLEN;
--
2.20.0
next prev parent reply other threads:[~2019-03-22 15:48 UTC|newest]
Thread overview: 46+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-03-22 15:43 [BACKPORT 4.4.y 00/25] candidates from spreadtrum 4.4 product kernel Arnd Bergmann
2019-03-22 15:43 ` [BACKPORT 4.4.y 01/25] mmc: pwrseq: constify mmc_pwrseq_ops structures Arnd Bergmann
2019-03-26 1:08 ` Greg KH
2019-03-26 6:44 ` Julia Lawall
2019-03-26 8:11 ` Arnd Bergmann
2019-03-22 15:43 ` [BACKPORT 4.4.y 02/25] ALSA: compress: add support for 32bit calls in a 64bit kernel Arnd Bergmann
2019-03-26 1:09 ` Greg KH
2019-03-26 7:55 ` Arnd Bergmann
2019-03-30 9:40 ` Greg KH
2019-03-22 15:43 ` [BACKPORT 4.4.y 03/25] mmc: pwrseq_simple: Make reset-gpios optional to match doc Arnd Bergmann
2019-03-22 15:43 ` [BACKPORT 4.4.y 04/25] USB: iowarrior: fix oops with malicious USB descriptors Arnd Bergmann
2019-03-26 1:13 ` Greg Kroah-Hartman
2019-03-26 8:20 ` Arnd Bergmann
2019-03-26 9:35 ` Baolin Wang
2019-03-26 9:47 ` 翟京 (Orson Zhai)
2019-03-22 15:43 ` [BACKPORT 4.4.y 05/25] mmc: debugfs: Add a restriction to mmc debugfs clock setting Arnd Bergmann
2019-03-22 15:43 ` [BACKPORT 4.4.y 06/25] mmc: make MAN_BKOPS_EN message a debug Arnd Bergmann
2019-03-22 15:43 ` [BACKPORT 4.4.y 07/25] mmc: sanitize 'bus width' in debug output Arnd Bergmann
2019-03-22 15:43 ` [BACKPORT 4.4.y 08/25] mmc: core: shut up "voltage-ranges unspecified" pr_info() Arnd Bergmann
2019-03-22 15:44 ` [BACKPORT 4.4.y 09/25] usb: dwc3: gadget: Fix suspend/resume during device mode Arnd Bergmann
2019-03-22 15:44 ` [BACKPORT 4.4.y 10/25] arm64: mm: Add trace_irqflags annotations to do_debug_exception() Arnd Bergmann
2019-03-22 15:44 ` [BACKPORT 4.4.y 11/25] mmc: core: fix using wrong io voltage if mmc_select_hs200 fails Arnd Bergmann
2019-03-22 15:44 ` [BACKPORT 4.4.y 12/25] mm/rmap: replace BUG_ON(anon_vma->degree) with VM_WARN_ON Arnd Bergmann
2019-03-22 15:44 ` [BACKPORT 4.4.y 13/25] extcon: usb-gpio: Don't miss event during suspend/resume Arnd Bergmann
2019-03-22 15:44 ` [BACKPORT 4.4.y 14/25] kbuild: setlocalversion: print error to STDERR Arnd Bergmann
2019-03-22 15:44 ` [BACKPORT 4.4.y 15/25] usb: gadget: composite: fix dereference after null check coverify warning Arnd Bergmann
2019-03-22 15:44 ` [BACKPORT 4.4.y 16/25] usb: gadget: Add the gserial port checking in gs_start_tx() Arnd Bergmann
2019-03-22 15:44 ` Arnd Bergmann [this message]
2019-03-26 1:27 ` [BACKPORT 4.4.y 17/25] mmc: core: don't try to switch block size for dual rate mode Greg KH
2019-03-26 8:14 ` Arnd Bergmann
2019-03-22 15:44 ` [BACKPORT 4.4.y 18/25] tcp/dccp: drop SYN packets if accept queue is full Arnd Bergmann
2019-03-26 1:21 ` Greg KH
2019-03-22 15:44 ` [BACKPORT 4.4.y 19/25] serial: sprd: adjust TIMEOUT to a big value Arnd Bergmann
2019-03-26 1:21 ` Greg KH
2019-03-22 15:44 ` [BACKPORT 4.4.y 20/25] Hang/soft lockup in d_invalidate with simultaneous calls Arnd Bergmann
2019-03-26 1:30 ` Greg KH
2019-03-22 15:44 ` [BACKPORT 4.4.y 21/25] arm64: traps: disable irq in die() Arnd Bergmann
2019-03-26 1:31 ` Greg KH
2019-03-22 15:44 ` [BACKPORT 4.4.y 22/25] usb: renesas_usbhs: gadget: fix unused-but-set-variable warning Arnd Bergmann
2019-03-22 15:44 ` [BACKPORT 4.4.y 23/25] serial: sprd: clear timeout interrupt only rather than all interrupts Arnd Bergmann
2019-03-26 1:34 ` Greg KH
2019-03-22 15:44 ` [BACKPORT 4.4.y 24/25] lib/int_sqrt: optimize small argument Arnd Bergmann
2019-03-26 1:36 ` Greg KH
2019-03-22 15:44 ` [BACKPORT 4.4.y 25/25] USB: core: only clean up what we allocated Arnd Bergmann
2019-03-26 1:36 ` Greg Kroah-Hartman
2019-03-26 2:18 ` [BACKPORT 4.4.y 00/25] candidates from spreadtrum 4.4 product kernel Greg KH
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190322154425.3852517-18-arnd@arndb.de \
--to=arnd@arndb.de \
--cc=avri.altman@wdc.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mmc@vger.kernel.org \
--cc=lohengrin1024@gmail.com \
--cc=mort@bork.org \
--cc=riteshh@codeaurora.org \
--cc=shawn.lin@rock-chips.com \
--cc=stable@vger.kernel.org \
--cc=ulf.hansson@linaro.org \
--cc=wsa+renesas@sang-engineering.com \
--cc=xzy.xu@rock-chips.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).