From: Yong Wu <yong.wu@mediatek.com>
To: Matthias Brugger <matthias.bgg@gmail.com>
Cc: Joerg Roedel <joro@8bytes.org>,
Robin Murphy <robin.murphy@arm.com>,
Rob Herring <robh+dt@kernel.org>,
Evan Green <evgreen@chromium.org>, Tomasz Figa <tfiga@google.com>,
<linux-mediatek@lists.infradead.org>,
<srv_heupstream@mediatek.com>, <devicetree@vger.kernel.org>,
<linux-kernel@vger.kernel.org>,
<linux-arm-kernel@lists.infradead.org>,
<iommu@lists.linux-foundation.org>, <weiyi.lu@mediatek.com>,
<yong.wu@mediatek.com>, <youlin.pei@mediatek.com>,
Nicolas Boichat <drinkcat@chromium.org>, <anan.sun@mediatek.com>,
Matthias Kaehlcke <mka@chromium.org>
Subject: [PATCH] arm64: dts: Add m4u and smi-larbs nodes for mt8183
Date: Sun, 24 Mar 2019 15:41:15 +0800 [thread overview]
Message-ID: <1553413275-10724-1-git-send-email-yong.wu@mediatek.com> (raw)
Add nodes for M4U, smi-common, and smi-larbs.
Signed-off-by: Yong Wu <yong.wu@mediatek.com>
---
This one is based on MTK IOMMU v6[1] and basical nodes of clocks and powers.
[1] https://patchwork.kernel.org/patch/10816827/
[2] https://patchwork.kernel.org/patch/10858941/
---
arch/arm64/boot/dts/mediatek/mt8183.dtsi | 85 ++++++++++++++++++++++++++++++++
1 file changed, 85 insertions(+)
diff --git a/arch/arm64/boot/dts/mediatek/mt8183.dtsi b/arch/arm64/boot/dts/mediatek/mt8183.dtsi
index 75c4881..1138da2 100644
--- a/arch/arm64/boot/dts/mediatek/mt8183.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt8183.dtsi
@@ -8,6 +8,7 @@
#include <dt-bindings/clock/mt8183-clk.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/memory/mt8183-larb-port.h>
#include <dt-bindings/power/mt8183-power.h>
/ {
@@ -269,6 +270,15 @@
clock-names = "spi", "wrap";
};
+ iommu: iommu@10205000 {
+ compatible = "mediatek,mt8183-m4u";
+ reg = <0 0x10205000 0 0x1000>;
+ interrupts = <GIC_SPI 166 IRQ_TYPE_LEVEL_LOW>;
+ mediatek,larbs = <&larb0 &larb1 &larb2 &larb3
+ &larb4 &larb5 &larb6>;
+ #iommu-cells = <1>;
+ };
+
uart0: serial@11002000 {
compatible = "mediatek,mt8183-uart",
"mediatek,mt6577-uart";
@@ -317,9 +327,25 @@
#clock-cells = <1>;
};
+ larb0: larb@14017000 {
+ compatible = "mediatek,mt8183-smi-larb";
+ reg = <0 0x14017000 0 0x1000>;
+ mediatek,smi = <&smi_common>;
+ clocks = <&mmsys CLK_MM_SMI_LARB0>,
+ <&mmsys CLK_MM_SMI_LARB0>;
+ power-domains = <&scpsys MT8183_POWER_DOMAIN_DISP>;
+ clock-names = "apb", "smi";
+ };
+
smi_common: smi@14019000 {
compatible = "mediatek,mt8183-smi-common", "syscon";
reg = <0 0x14019000 0 0x1000>;
+ clocks = <&mmsys CLK_MM_SMI_COMMON>,
+ <&mmsys CLK_MM_SMI_COMMON>,
+ <&mmsys CLK_MM_GALS_COMM0>,
+ <&mmsys CLK_MM_GALS_COMM1>;
+ clock-names = "apb", "smi", "gals0", "gals1";
+ power-domains = <&scpsys MT8183_POWER_DOMAIN_DISP>;
};
imgsys: syscon@15020000 {
@@ -328,18 +354,57 @@
#clock-cells = <1>;
};
+ larb5: larb@15021000 {
+ compatible = "mediatek,mt8183-smi-larb";
+ reg = <0 0x15021000 0 0x1000>;
+ mediatek,smi = <&smi_common>;
+ clocks = <&imgsys CLK_IMG_LARB5>, <&imgsys CLK_IMG_LARB5>,
+ <&mmsys CLK_MM_GALS_IMG2MM>;
+ clock-names = "apb", "smi", "gals";
+ power-domains = <&scpsys MT8183_POWER_DOMAIN_ISP>;
+ };
+
+ larb2: larb@1502f000 {
+ compatible = "mediatek,mt8183-smi-larb";
+ reg = <0 0x1502f000 0 0x1000>;
+ mediatek,smi = <&smi_common>;
+ clocks = <&imgsys CLK_IMG_LARB2>, <&imgsys CLK_IMG_LARB2>,
+ <&mmsys CLK_MM_GALS_IPU2MM>;
+ clock-names = "apb", "smi", "gals";
+ power-domains = <&scpsys MT8183_POWER_DOMAIN_ISP>;
+ };
+
vdecsys: syscon@16000000 {
compatible = "mediatek,mt8183-vdecsys", "syscon";
reg = <0 0x16000000 0 0x1000>;
#clock-cells = <1>;
};
+ larb1: larb@16010000 {
+ compatible = "mediatek,mt8183-smi-larb";
+ reg = <0 0x16010000 0 0x1000>;
+ mediatek,smi = <&smi_common>;
+ clocks = <&vdecsys CLK_VDEC_VDEC>, <&vdecsys CLK_VDEC_LARB1>;
+ clock-names = "apb", "smi";
+ power-domains = <&scpsys MT8183_POWER_DOMAIN_VDEC>;
+ };
+
vencsys: syscon@17000000 {
compatible = "mediatek,mt8183-vencsys", "syscon";
reg = <0 0x17000000 0 0x1000>;
#clock-cells = <1>;
};
+ larb4: larb@17010000 {
+ compatible = "mediatek,mt8183-smi-larb";
+ reg = <0 0x17010000 0 0x1000>;
+ mediatek,smi = <&smi_common>;
+ clocks = <&vencsys CLK_VENC_LARB>,
+ <&vencsys CLK_VENC_LARB>;
+ clock-names = "apb", "smi";
+ power-domains = <&scpsys MT8183_POWER_DOMAIN_VENC>;
+ };
+
ipu_conn: syscon@19000000 {
compatible = "mediatek,mt8183-ipu_conn", "syscon";
reg = <0 0x19000000 0 0x1000>;
@@ -369,5 +434,25 @@
reg = <0 0x1a000000 0 0x1000>;
#clock-cells = <1>;
};
+
+ larb6: larb@1a001000 {
+ compatible = "mediatek,mt8183-smi-larb";
+ reg = <0 0x1a001000 0 0x1000>;
+ mediatek,smi = <&smi_common>;
+ clocks = <&camsys CLK_CAM_LARB6>, <&camsys CLK_CAM_LARB6>,
+ <&mmsys CLK_MM_GALS_CAM2MM>;
+ clock-names = "apb", "smi", "gals";
+ power-domains = <&scpsys MT8183_POWER_DOMAIN_CAM>;
+ };
+
+ larb3: larb@1a002000 {
+ compatible = "mediatek,mt8183-smi-larb";
+ reg = <0 0x1a002000 0 0x1000>;
+ mediatek,smi = <&smi_common>;
+ clocks = <&camsys CLK_CAM_LARB3>, <&camsys CLK_CAM_LARB3>,
+ <&mmsys CLK_MM_GALS_IPU12MM>;
+ clock-names = "apb", "smi", "gals";
+ power-domains = <&scpsys MT8183_POWER_DOMAIN_CAM>;
+ };
};
};
--
1.9.1
reply other threads:[~2019-03-24 7:41 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1553413275-10724-1-git-send-email-yong.wu@mediatek.com \
--to=yong.wu@mediatek.com \
--cc=anan.sun@mediatek.com \
--cc=devicetree@vger.kernel.org \
--cc=drinkcat@chromium.org \
--cc=evgreen@chromium.org \
--cc=iommu@lists.linux-foundation.org \
--cc=joro@8bytes.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mediatek@lists.infradead.org \
--cc=matthias.bgg@gmail.com \
--cc=mka@chromium.org \
--cc=robh+dt@kernel.org \
--cc=robin.murphy@arm.com \
--cc=srv_heupstream@mediatek.com \
--cc=tfiga@google.com \
--cc=weiyi.lu@mediatek.com \
--cc=youlin.pei@mediatek.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).