[1/2] bindings: fsl-edma: Document fsl,imx8qm-edma compatbile string
diff mbox series

Message ID 20190326094239.5910-2-daniel.baluta@nxp.com
State New
Headers show
Series
  • Add EDMA0/EDMA1 nodes
Related show

Commit Message

Daniel Baluta March 26, 2019, 9:43 a.m. UTC
Add imx8qm edma support.

Signed-off-by: Daniel Baluta <daniel.baluta@nxp.com>
---
 Documentation/devicetree/bindings/dma/fsl-edma.txt | 1 +
 1 file changed, 1 insertion(+)

Patch
diff mbox series

diff --git a/Documentation/devicetree/bindings/dma/fsl-edma.txt b/Documentation/devicetree/bindings/dma/fsl-edma.txt
index 97e213e07660..5294ee094313 100644
--- a/Documentation/devicetree/bindings/dma/fsl-edma.txt
+++ b/Documentation/devicetree/bindings/dma/fsl-edma.txt
@@ -9,6 +9,7 @@  group, DMAMUX0 or DMAMUX1, but not both.
 Required properties:
 - compatible :
 	- "fsl,vf610-edma" for eDMA used similar to that on Vybrid vf610 SoC
+	- "fsl,imx8qm-edma" for eDMA used similar to that on i.MX8 SoC
 - reg : Specifies base physical address(s) and size of the eDMA registers.
 	The 1st region is eDMA control register's address and size.
 	The 2nd and the 3rd regions are programmable channel multiplexing