[4/6] net: stmmac: don't overwrite discard_frame status
diff mbox series

Message ID 20190327203540.1884-5-aaro.koskinen@iki.fi
State Accepted
Commit 1b746ce8b397e58f9e40ce5c63b7198de6930482
Headers show
Series
  • net: stmmac: fix handling of oversized frames
Related show

Commit Message

Aaro Koskinen March 27, 2019, 8:35 p.m. UTC
From: Aaro Koskinen <aaro.koskinen@nokia.com>

If we have error bits set, the discard_frame status will get overwritten
by checksum bit checks, which might set the status back to good one.
Fix by checking the COE status only if the frame is good.

Signed-off-by: Aaro Koskinen <aaro.koskinen@nokia.com>
---
 drivers/net/ethernet/stmicro/stmmac/enh_desc.c | 7 ++++---
 1 file changed, 4 insertions(+), 3 deletions(-)

Patch
diff mbox series

diff --git a/drivers/net/ethernet/stmicro/stmmac/enh_desc.c b/drivers/net/ethernet/stmicro/stmmac/enh_desc.c
index e8855e6adb48..c42ef6c729c0 100644
--- a/drivers/net/ethernet/stmicro/stmmac/enh_desc.c
+++ b/drivers/net/ethernet/stmicro/stmmac/enh_desc.c
@@ -231,9 +231,10 @@  static int enh_desc_get_rx_status(void *data, struct stmmac_extra_stats *x,
 	 * It doesn't match with the information reported into the databook.
 	 * At any rate, we need to understand if the CSUM hw computation is ok
 	 * and report this info to the upper layers. */
-	ret = enh_desc_coe_rdes0(!!(rdes0 & RDES0_IPC_CSUM_ERROR),
-				 !!(rdes0 & RDES0_FRAME_TYPE),
-				 !!(rdes0 & ERDES0_RX_MAC_ADDR));
+	if (likely(ret == good_frame))
+		ret = enh_desc_coe_rdes0(!!(rdes0 & RDES0_IPC_CSUM_ERROR),
+					 !!(rdes0 & RDES0_FRAME_TYPE),
+					 !!(rdes0 & ERDES0_RX_MAC_ADDR));
 
 	if (unlikely(rdes0 & RDES0_DRIBBLING))
 		x->dribbling_bit++;