From: Colin King <colin.king@canonical.com>
To: Jack Wang <jinpu.wang@profitbricks.com>,
lindar_liu@usish.com,
"James E . J . Bottomley" <jejb@linux.ibm.com>,
"Martin K . Petersen" <martin.petersen@oracle.com>,
linux-scsi@vger.kernel.org
Cc: kernel-janitors@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: [PATCH] scsi: pm8001: clean up structurally dead code when PM8001_USE_MSIX is defined (part2)
Date: Fri, 29 Mar 2019 15:32:21 +0000 [thread overview]
Message-ID: <20190329153221.29238-1-colin.king@canonical.com> (raw)
From: Colin Ian King <colin.king@canonical.com>
When macro PM8001_USE_MSIX is defined there is redundant dead code
call to pm8001_cr32. Clean this up for the defined PM8001_USE_MSIX and
undefined PM8001_USE_MSIX cases.
Also rename the functions pm8001_chip_is_our_interupt,
pm80xx_chip_is_our_interupt and function pointer is_our_interrupt
to fix spelling mistakes.
Signed-off-by: Colin Ian King <colin.king@canonical.com>
---
drivers/scsi/pm8001/pm8001_hwi.c | 11 ++++++-----
drivers/scsi/pm8001/pm8001_init.c | 4 ++--
drivers/scsi/pm8001/pm8001_sas.h | 2 +-
drivers/scsi/pm8001/pm80xx_hwi.c | 11 ++++++-----
4 files changed, 15 insertions(+), 13 deletions(-)
diff --git a/drivers/scsi/pm8001/pm8001_hwi.c b/drivers/scsi/pm8001/pm8001_hwi.c
index e4209091c1da..627075d00918 100644
--- a/drivers/scsi/pm8001/pm8001_hwi.c
+++ b/drivers/scsi/pm8001/pm8001_hwi.c
@@ -4623,17 +4623,18 @@ static int pm8001_chip_phy_ctl_req(struct pm8001_hba_info *pm8001_ha,
return ret;
}
-static u32 pm8001_chip_is_our_interupt(struct pm8001_hba_info *pm8001_ha)
+static u32 pm8001_chip_is_our_interrupt(struct pm8001_hba_info *pm8001_ha)
{
- u32 value;
#ifdef PM8001_USE_MSIX
return 1;
-#endif
+#else
+ u32 value;
+
value = pm8001_cr32(pm8001_ha, 0, MSGU_ODR);
if (value)
return 1;
return 0;
-
+#endif
}
/**
@@ -5119,7 +5120,7 @@ const struct pm8001_dispatch pm8001_8001_dispatch = {
.chip_rst = pm8001_hw_chip_rst,
.chip_iounmap = pm8001_chip_iounmap,
.isr = pm8001_chip_isr,
- .is_our_interupt = pm8001_chip_is_our_interupt,
+ .is_our_interrupt = pm8001_chip_is_our_interrupt,
.isr_process_oq = process_oq,
.interrupt_enable = pm8001_chip_interrupt_enable,
.interrupt_disable = pm8001_chip_interrupt_disable,
diff --git a/drivers/scsi/pm8001/pm8001_init.c b/drivers/scsi/pm8001/pm8001_init.c
index a36060c23b37..3374f553c617 100644
--- a/drivers/scsi/pm8001/pm8001_init.c
+++ b/drivers/scsi/pm8001/pm8001_init.c
@@ -201,7 +201,7 @@ static irqreturn_t pm8001_interrupt_handler_msix(int irq, void *opaque)
if (unlikely(!pm8001_ha))
return IRQ_NONE;
- if (!PM8001_CHIP_DISP->is_our_interupt(pm8001_ha))
+ if (!PM8001_CHIP_DISP->is_our_interrupt(pm8001_ha))
return IRQ_NONE;
#ifdef PM8001_USE_TASKLET
tasklet_schedule(&pm8001_ha->tasklet[irq_vector->irq_id]);
@@ -224,7 +224,7 @@ static irqreturn_t pm8001_interrupt_handler_intx(int irq, void *dev_id)
pm8001_ha = sha->lldd_ha;
if (unlikely(!pm8001_ha))
return IRQ_NONE;
- if (!PM8001_CHIP_DISP->is_our_interupt(pm8001_ha))
+ if (!PM8001_CHIP_DISP->is_our_interrupt(pm8001_ha))
return IRQ_NONE;
#ifdef PM8001_USE_TASKLET
diff --git a/drivers/scsi/pm8001/pm8001_sas.h b/drivers/scsi/pm8001/pm8001_sas.h
index f88b0d33c385..ac6d8e3f22de 100644
--- a/drivers/scsi/pm8001/pm8001_sas.h
+++ b/drivers/scsi/pm8001/pm8001_sas.h
@@ -197,7 +197,7 @@ struct pm8001_dispatch {
int (*chip_ioremap)(struct pm8001_hba_info *pm8001_ha);
void (*chip_iounmap)(struct pm8001_hba_info *pm8001_ha);
irqreturn_t (*isr)(struct pm8001_hba_info *pm8001_ha, u8 vec);
- u32 (*is_our_interupt)(struct pm8001_hba_info *pm8001_ha);
+ u32 (*is_our_interrupt)(struct pm8001_hba_info *pm8001_ha);
int (*isr_process_oq)(struct pm8001_hba_info *pm8001_ha, u8 vec);
void (*interrupt_enable)(struct pm8001_hba_info *pm8001_ha, u8 vec);
void (*interrupt_disable)(struct pm8001_hba_info *pm8001_ha, u8 vec);
diff --git a/drivers/scsi/pm8001/pm80xx_hwi.c b/drivers/scsi/pm8001/pm80xx_hwi.c
index 536d2b4384f8..301de40eb708 100644
--- a/drivers/scsi/pm8001/pm80xx_hwi.c
+++ b/drivers/scsi/pm8001/pm80xx_hwi.c
@@ -4617,17 +4617,18 @@ static int pm80xx_chip_phy_ctl_req(struct pm8001_hba_info *pm8001_ha,
return pm8001_mpi_build_cmd(pm8001_ha, circularQ, opc, &payload, 0);
}
-static u32 pm80xx_chip_is_our_interupt(struct pm8001_hba_info *pm8001_ha)
+static u32 pm80xx_chip_is_our_interrupt(struct pm8001_hba_info *pm8001_ha)
{
- u32 value;
#ifdef PM8001_USE_MSIX
return 1;
-#endif
+#else
+ u32 value;
+
value = pm8001_cr32(pm8001_ha, 0, MSGU_ODR);
if (value)
return 1;
return 0;
-
+#endif
}
/**
@@ -4724,7 +4725,7 @@ const struct pm8001_dispatch pm8001_80xx_dispatch = {
.chip_rst = pm80xx_hw_chip_rst,
.chip_iounmap = pm8001_chip_iounmap,
.isr = pm80xx_chip_isr,
- .is_our_interupt = pm80xx_chip_is_our_interupt,
+ .is_our_interrupt = pm80xx_chip_is_our_interrupt,
.isr_process_oq = process_oq,
.interrupt_enable = pm80xx_chip_interrupt_enable,
.interrupt_disable = pm80xx_chip_interrupt_disable,
--
2.20.1
next reply other threads:[~2019-03-29 15:32 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-03-29 15:32 Colin King [this message]
2019-03-29 20:08 ` [PATCH] scsi: pm8001: clean up structurally dead code when PM8001_USE_MSIX is defined (part2) Mukesh Ojha
2019-03-29 21:00 ` Mukesh Ojha
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190329153221.29238-1-colin.king@canonical.com \
--to=colin.king@canonical.com \
--cc=jejb@linux.ibm.com \
--cc=jinpu.wang@profitbricks.com \
--cc=kernel-janitors@vger.kernel.org \
--cc=lindar_liu@usish.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-scsi@vger.kernel.org \
--cc=martin.petersen@oracle.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).