From: Daniel Baluta <daniel.baluta@nxp.com>
To: "shawnguo@kernel.org" <shawnguo@kernel.org>
Cc: "robh+dt@kernel.org" <robh+dt@kernel.org>,
"mark.rutland@arm.com" <mark.rutland@arm.com>,
"s.hauer@pengutronix.de" <s.hauer@pengutronix.de>,
"kernel@pengutronix.de" <kernel@pengutronix.de>,
"festevam@gmail.com" <festevam@gmail.com>,
dl-linux-imx <linux-imx@nxp.com>,
Aisheng Dong <aisheng.dong@nxp.com>, Peng Fan <peng.fan@nxp.com>,
Anson Huang <anson.huang@nxp.com>,
Daniel Baluta <daniel.baluta@nxp.com>,
"devicetree@vger.kernel.org" <devicetree@vger.kernel.org>,
"linux-arm-kernel@lists.infradead.org"
<linux-arm-kernel@lists.infradead.org>,
"linux-kernel@vger.kernel.org" <linux-kernel@vger.kernel.org>,
"S.j. Wang" <shengjiu.wang@nxp.com>, Teo Hall <teo.hall@nxp.com>
Subject: [PATCH] arm64: dts: imx8qxp: Add lpuart1/lpuart2/lpuart3 nodes
Date: Sat, 30 Mar 2019 17:07:44 +0000 [thread overview]
Message-ID: <20190330170725.24360-1-daniel.baluta@nxp.com> (raw)
lpuart nodes are part of the ADMA subsystem. See Audio DMA
memory map in iMX8 QXP RM [1]
This patch is based on the dtsi file initially submitted by
Teo Hall in i.MX NXP internal tree.
[1] https://www.nxp.com/docs/en/reference-manual/IMX8DQXPRM.pdf
Signed-off-by: Teo Hall <teo.hall@nxp.com>
Signed-off-by: Daniel Baluta <daniel.baluta@nxp.com>
---
arch/arm64/boot/dts/freescale/imx8qxp.dtsi | 33 ++++++++++++++++++++++
1 file changed, 33 insertions(+)
diff --git a/arch/arm64/boot/dts/freescale/imx8qxp.dtsi b/arch/arm64/boot/dts/freescale/imx8qxp.dtsi
index 0cb939861a60..1adfe15c2ea5 100644
--- a/arch/arm64/boot/dts/freescale/imx8qxp.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8qxp.dtsi
@@ -193,6 +193,39 @@
status = "disabled";
};
+ adma_lpuart1: serial@5a070000 {
+ compatible = "fsl,imx8qxp-lpuart", "fsl,imx7ulp-lpuart";
+ reg = <0x5a070000 0x1000>;
+ interrupts = <GIC_SPI 226 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-parent = <&gic>;
+ clocks = <&adma_lpcg IMX_ADMA_LPCG_UART1_BAUD_CLK>;
+ clock-names = "ipg";
+ power-domains = <&pd IMX_SC_R_UART_1>;
+ status = "disabled";
+ };
+
+ adma_lpuart2: serial@5a080000 {
+ compatible = "fsl,imx8qxp-lpuart", "fsl,imx7ulp-lpuart";
+ reg = <0x5a080000 0x1000>;
+ interrupts = <GIC_SPI 227 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-parent = <&gic>;
+ clocks = <&adma_lpcg IMX_ADMA_LPCG_UART2_BAUD_CLK>;
+ clock-names = "ipg";
+ power-domains = <&pd IMX_SC_R_UART_2>;
+ status = "disabled";
+ }
+
+ adma_lpuart3: serial@5a090000 {
+ compatible = "fsl,imx8qxp-lpuart", "fsl,imx7ulp-lpuart";
+ reg = <0x5a090000 0x1000>;
+ interrupts = <GIC_SPI 228 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-parent = <&gic>;
+ clocks = <&adma_lpcg IMX_ADMA_LPCG_UART3_BAUD_CLK>;
+ clock-names = "ipg";
+ power-domains = <&pd IMX_SC_R_UART_3>;
+ status = "disabled";
+ }
+
adma_i2c0: i2c@5a800000 {
compatible = "fsl,imx8qxp-lpi2c", "fsl,imx7ulp-lpi2c";
reg = <0x5a800000 0x4000>;
--
2.17.1
next reply other threads:[~2019-03-30 17:07 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-03-30 17:07 Daniel Baluta [this message]
2019-03-31 11:20 ` [PATCH] arm64: dts: imx8qxp: Add lpuart1/lpuart2/lpuart3 nodes Aisheng Dong
2019-04-11 3:00 ` Shawn Guo
2019-04-11 6:49 ` Shawn Guo
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190330170725.24360-1-daniel.baluta@nxp.com \
--to=daniel.baluta@nxp.com \
--cc=aisheng.dong@nxp.com \
--cc=anson.huang@nxp.com \
--cc=devicetree@vger.kernel.org \
--cc=festevam@gmail.com \
--cc=kernel@pengutronix.de \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-imx@nxp.com \
--cc=linux-kernel@vger.kernel.org \
--cc=mark.rutland@arm.com \
--cc=peng.fan@nxp.com \
--cc=robh+dt@kernel.org \
--cc=s.hauer@pengutronix.de \
--cc=shawnguo@kernel.org \
--cc=shengjiu.wang@nxp.com \
--cc=teo.hall@nxp.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).