[V5,1/3] USB: serial: f81232: clear overrun flag
diff mbox series

Message ID 1554272790-26747-1-git-send-email-hpeter+linux_kernel@gmail.com
State New
Headers show
Series
  • [V5,1/3] USB: serial: f81232: clear overrun flag
Related show

Commit Message

Ji-Ze Hong (Peter Hong) April 3, 2019, 6:26 a.m. UTC
The F81232 will report data and LSR with bulk like following format:
bulk-in data: [LSR(1Byte)+DATA(1Byte)][LSR(1Byte)+DATA(1Byte)]...

LSR will auto clear frame/parity/break error flag when reading by H/W,
but overrrun will only cleared when reading LSR. So this patch add a
worker to read LSR when overrun and flush the worker on close() &
suspend().

Cc: Oliver Neukum <oneukum@suse.com>
Signed-off-by: Ji-Ze Hong (Peter Hong) <hpeter+linux_kernel@gmail.com>
---
v5:
	1: Source code base revert to v3 and remove all v4 changes.
	2: Add serial->suspending check in f81232_process_read_urb()
	   before schedule_work(&priv->lsr_work) to avoid race condition.

v4:
	1: Add serial->suspending check in f81232_lsr_worker() to avoid
	   re-trigger
	2: Add port_priv-lsr_work_resched to re-trigger LSR worker

v3:
	1: Add flush_work(&port_priv->lsr_work) in f81232_suspend().

v2:
	1: Add flush_work(&port_priv->lsr_work) in f81232_close().

 drivers/usb/serial/f81232.c | 37 +++++++++++++++++++++++++++++++++++++
 1 file changed, 37 insertions(+)

Comments

Oliver Neukum April 3, 2019, 7:59 a.m. UTC | #1
On Mi, 2019-04-03 at 14:26 +0800,  Ji-Ze Hong (Peter Hong)  wrote:
> The F81232 will report data and LSR with bulk like following format:
> bulk-in data: [LSR(1Byte)+DATA(1Byte)][LSR(1Byte)+DATA(1Byte)]...
> 
> LSR will auto clear frame/parity/break error flag when reading by H/W,
> but overrrun will only cleared when reading LSR. So this patch add a
> worker to read LSR when overrun and flush the worker on close() &
> suspend().

Hi,

I am most sorry to complain again. Please forgive me for being less
clear than necessary.

> 
> Cc: Oliver Neukum <oneukum@suse.com>
> Signed-off-by: Ji-Ze Hong (Peter Hong) <hpeter+linux_kernel@gmail.com>
> ---
> v5:
> 	1: Source code base revert to v3 and remove all v4 changes.
> 	2: Add serial->suspending check in f81232_process_read_urb()
> 	   before schedule_work(&priv->lsr_work) to avoid race condition.
> 
> v4:
> 	1: Add serial->suspending check in f81232_lsr_worker() to avoid
> 	   re-trigger
> 	2: Add port_priv-lsr_work_resched to re-trigger LSR worker
> 
> v3:
> 	1: Add flush_work(&port_priv->lsr_work) in f81232_suspend().
> 
> v2:
> 	1: Add flush_work(&port_priv->lsr_work) in f81232_close().
> 
>  drivers/usb/serial/f81232.c | 37 +++++++++++++++++++++++++++++++++++++
>  1 file changed, 37 insertions(+)
> 
> diff --git a/drivers/usb/serial/f81232.c b/drivers/usb/serial/f81232.c
> index 0dcdcb4b2cde..d8a0bb7a41f0 100644
> --- a/drivers/usb/serial/f81232.c
> +++ b/drivers/usb/serial/f81232.c
> @@ -41,12 +41,14 @@ MODULE_DEVICE_TABLE(usb, id_table);
>  #define FIFO_CONTROL_REGISTER		(0x02 + SERIAL_BASE_ADDRESS)
>  #define LINE_CONTROL_REGISTER		(0x03 + SERIAL_BASE_ADDRESS)
>  #define MODEM_CONTROL_REGISTER		(0x04 + SERIAL_BASE_ADDRESS)
> +#define LINE_STATUS_REGISTER		(0x05 + SERIAL_BASE_ADDRESS)
>  #define MODEM_STATUS_REGISTER		(0x06 + SERIAL_BASE_ADDRESS)
>  
>  struct f81232_private {
>  	struct mutex lock;
>  	u8 modem_control;
>  	u8 modem_status;

Here you need a flag

bool deferred_lsr_work_needed;
> +	struct work_struct lsr_work;
>  	struct work_struct interrupt_work;
>  	struct usb_serial_port *port;
>  };
> @@ -282,6 +284,8 @@ static void f81232_read_int_callback(struct urb *urb)
>  static void f81232_process_read_urb(struct urb *urb)
>  {
>  	struct usb_serial_port *port = urb->context;
> +	struct usb_serial *serial = port->serial;
> +	struct f81232_private *priv = usb_get_serial_port_data(port);
>  	unsigned char *data = urb->transfer_buffer;
>  	char tty_flag;
>  	unsigned int i;
> @@ -315,6 +319,9 @@ static void f81232_process_read_urb(struct urb *urb)
>  
>  			if (lsr & UART_LSR_OE) {
>  				port->icount.overrun++;
> +
> +				if (!serial->suspending)
> +					schedule_work(&priv->lsr_work);
Yes, but you cannot just drop it. You also need

else
	priv->deferred_lsr_work_needed = true;
>  				tty_insert_flip_char(&port->port, 0,
>  						TTY_OVERRUN);
>  			}
> @@ -556,9 +563,12 @@ static int f81232_open(struct tty_struct *tty, struct usb_serial_port *port)
>  
>  static void f81232_close(struct usb_serial_port *port)
>  {
> +	struct f81232_private *port_priv = usb_get_serial_port_data(port);
> +
>  	f81232_port_disable(port);
>  	usb_serial_generic_close(port);
>  	usb_kill_urb(port->interrupt_in_urb);
> +	flush_work(&port_priv->lsr_work);
>  }
>  
>  static void f81232_dtr_rts(struct usb_serial_port *port, int on)
> @@ -603,6 +613,21 @@ static void  f81232_interrupt_work(struct work_struct *work)
>  	f81232_read_msr(priv->port);
>  }
>  
> +static void f81232_lsr_worker(struct work_struct *work)
> +{
> +	struct f81232_private *priv;
> +	struct usb_serial_port *port;
> +	int status;
> +	u8 tmp;
> +
> +	priv = container_of(work, struct f81232_private, lsr_work);
> +	port = priv->port;
> +
> +	status = f81232_get_register(port, LINE_STATUS_REGISTER, &tmp);
> +	if (status)
> +		dev_warn(&port->dev, "read LSR failed: %d\n", status);
> +}
> +
>  static int f81232_port_probe(struct usb_serial_port *port)
>  {
>  	struct f81232_private *priv;
> @@ -613,6 +638,7 @@ static int f81232_port_probe(struct usb_serial_port *port)
>  
>  	mutex_init(&priv->lock);
>  	INIT_WORK(&priv->interrupt_work,  f81232_interrupt_work);
> +	INIT_WORK(&priv->lsr_work, f81232_lsr_worker);
>  
>  	usb_set_serial_port_data(port, priv);
>  
> @@ -632,6 +658,16 @@ static int f81232_port_remove(struct usb_serial_port *port)
>  	return 0;
>  }
>  
> +static int f81232_suspend(struct usb_serial *serial, pm_message_t message)
> +{
> +	struct f81232_private *port_priv;
> +
> +	port_priv = usb_get_serial_port_data(serial->port[0]);
> +	flush_work(&port_priv->lsr_work);
> +
> +	return 0;
> +}

And you do need a resume, which you had in version v4 to check
the  deferred_lsr_work_needed flag and schedule the work if it is
set.

	Most sorry
		Oliver

Patch
diff mbox series

diff --git a/drivers/usb/serial/f81232.c b/drivers/usb/serial/f81232.c
index 0dcdcb4b2cde..d8a0bb7a41f0 100644
--- a/drivers/usb/serial/f81232.c
+++ b/drivers/usb/serial/f81232.c
@@ -41,12 +41,14 @@  MODULE_DEVICE_TABLE(usb, id_table);
 #define FIFO_CONTROL_REGISTER		(0x02 + SERIAL_BASE_ADDRESS)
 #define LINE_CONTROL_REGISTER		(0x03 + SERIAL_BASE_ADDRESS)
 #define MODEM_CONTROL_REGISTER		(0x04 + SERIAL_BASE_ADDRESS)
+#define LINE_STATUS_REGISTER		(0x05 + SERIAL_BASE_ADDRESS)
 #define MODEM_STATUS_REGISTER		(0x06 + SERIAL_BASE_ADDRESS)
 
 struct f81232_private {
 	struct mutex lock;
 	u8 modem_control;
 	u8 modem_status;
+	struct work_struct lsr_work;
 	struct work_struct interrupt_work;
 	struct usb_serial_port *port;
 };
@@ -282,6 +284,8 @@  static void f81232_read_int_callback(struct urb *urb)
 static void f81232_process_read_urb(struct urb *urb)
 {
 	struct usb_serial_port *port = urb->context;
+	struct usb_serial *serial = port->serial;
+	struct f81232_private *priv = usb_get_serial_port_data(port);
 	unsigned char *data = urb->transfer_buffer;
 	char tty_flag;
 	unsigned int i;
@@ -315,6 +319,9 @@  static void f81232_process_read_urb(struct urb *urb)
 
 			if (lsr & UART_LSR_OE) {
 				port->icount.overrun++;
+
+				if (!serial->suspending)
+					schedule_work(&priv->lsr_work);
 				tty_insert_flip_char(&port->port, 0,
 						TTY_OVERRUN);
 			}
@@ -556,9 +563,12 @@  static int f81232_open(struct tty_struct *tty, struct usb_serial_port *port)
 
 static void f81232_close(struct usb_serial_port *port)
 {
+	struct f81232_private *port_priv = usb_get_serial_port_data(port);
+
 	f81232_port_disable(port);
 	usb_serial_generic_close(port);
 	usb_kill_urb(port->interrupt_in_urb);
+	flush_work(&port_priv->lsr_work);
 }
 
 static void f81232_dtr_rts(struct usb_serial_port *port, int on)
@@ -603,6 +613,21 @@  static void  f81232_interrupt_work(struct work_struct *work)
 	f81232_read_msr(priv->port);
 }
 
+static void f81232_lsr_worker(struct work_struct *work)
+{
+	struct f81232_private *priv;
+	struct usb_serial_port *port;
+	int status;
+	u8 tmp;
+
+	priv = container_of(work, struct f81232_private, lsr_work);
+	port = priv->port;
+
+	status = f81232_get_register(port, LINE_STATUS_REGISTER, &tmp);
+	if (status)
+		dev_warn(&port->dev, "read LSR failed: %d\n", status);
+}
+
 static int f81232_port_probe(struct usb_serial_port *port)
 {
 	struct f81232_private *priv;
@@ -613,6 +638,7 @@  static int f81232_port_probe(struct usb_serial_port *port)
 
 	mutex_init(&priv->lock);
 	INIT_WORK(&priv->interrupt_work,  f81232_interrupt_work);
+	INIT_WORK(&priv->lsr_work, f81232_lsr_worker);
 
 	usb_set_serial_port_data(port, priv);
 
@@ -632,6 +658,16 @@  static int f81232_port_remove(struct usb_serial_port *port)
 	return 0;
 }
 
+static int f81232_suspend(struct usb_serial *serial, pm_message_t message)
+{
+	struct f81232_private *port_priv;
+
+	port_priv = usb_get_serial_port_data(serial->port[0]);
+	flush_work(&port_priv->lsr_work);
+
+	return 0;
+}
+
 static struct usb_serial_driver f81232_device = {
 	.driver = {
 		.owner =	THIS_MODULE,
@@ -655,6 +691,7 @@  static struct usb_serial_driver f81232_device = {
 	.read_int_callback =	f81232_read_int_callback,
 	.port_probe =		f81232_port_probe,
 	.port_remove =		f81232_port_remove,
+	.suspend =		f81232_suspend,
 };
 
 static struct usb_serial_driver * const serial_drivers[] = {