From: Dan Williams <dan.j.williams@intel.com>
To: akpm@linux-foundation.org
Cc: Michal Hocko <mhocko@suse.com>, Vlastimil Babka <vbabka@suse.cz>,
Logan Gunthorpe <logang@deltatee.com>,
linux-mm@kvack.org, linux-nvdimm@lists.01.org,
linux-kernel@vger.kernel.org, mhocko@suse.com, david@redhat.com
Subject: [PATCH v6 03/12] mm/sparsemem: Add helpers track active portions of a section at boot
Date: Wed, 17 Apr 2019 11:39:11 -0700 [thread overview]
Message-ID: <155552635098.2015392.5460028594173939000.stgit@dwillia2-desk3.amr.corp.intel.com> (raw)
In-Reply-To: <155552633539.2015392.2477781120122237934.stgit@dwillia2-desk3.amr.corp.intel.com>
Prepare for hot{plug,remove} of sub-ranges of a section by tracking a
section active bitmask, each bit representing 2MB (SECTION_SIZE (128M) /
map_active bitmask length (64)). If it turns out that 2MB is too large
of an active tracking granularity it is trivial to increase the size of
the map_active bitmap.
The implications of a partially populated section is that pfn_valid()
needs to go beyond a valid_section() check and read the sub-section
active ranges from the bitmask.
Cc: Michal Hocko <mhocko@suse.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Logan Gunthorpe <logang@deltatee.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
---
include/linux/mmzone.h | 29 ++++++++++++++++++++++++++++-
mm/page_alloc.c | 4 +++-
mm/sparse.c | 48 ++++++++++++++++++++++++++++++++++++++++++++++++
3 files changed, 79 insertions(+), 2 deletions(-)
diff --git a/include/linux/mmzone.h b/include/linux/mmzone.h
index 6726fc175b51..cffde898e345 100644
--- a/include/linux/mmzone.h
+++ b/include/linux/mmzone.h
@@ -1175,6 +1175,8 @@ struct mem_section_usage {
unsigned long pageblock_flags[0];
};
+void section_active_init(unsigned long pfn, unsigned long nr_pages);
+
struct page;
struct page_ext;
struct mem_section {
@@ -1312,12 +1314,36 @@ static inline struct mem_section *__pfn_to_section(unsigned long pfn)
extern int __highest_present_section_nr;
+static inline int section_active_index(phys_addr_t phys)
+{
+ return (phys & ~(PA_SECTION_MASK)) / SECTION_ACTIVE_SIZE;
+}
+
+#ifdef CONFIG_SPARSEMEM_VMEMMAP
+static inline int pfn_section_valid(struct mem_section *ms, unsigned long pfn)
+{
+ int idx = section_active_index(PFN_PHYS(pfn));
+
+ return !!(ms->usage->map_active & (1UL << idx));
+}
+#else
+static inline int pfn_section_valid(struct mem_section *ms, unsigned long pfn)
+{
+ return 1;
+}
+#endif
+
#ifndef CONFIG_HAVE_ARCH_PFN_VALID
static inline int pfn_valid(unsigned long pfn)
{
+ struct mem_section *ms;
+
if (pfn_to_section_nr(pfn) >= NR_MEM_SECTIONS)
return 0;
- return valid_section(__nr_to_section(pfn_to_section_nr(pfn)));
+ ms = __nr_to_section(pfn_to_section_nr(pfn));
+ if (!valid_section(ms))
+ return 0;
+ return pfn_section_valid(ms, pfn);
}
#endif
@@ -1349,6 +1375,7 @@ void sparse_init(void);
#define sparse_init() do {} while (0)
#define sparse_index_init(_sec, _nid) do {} while (0)
#define pfn_present pfn_valid
+#define section_active_init(_pfn, _nr_pages) do {} while (0)
#endif /* CONFIG_SPARSEMEM */
/*
diff --git a/mm/page_alloc.c b/mm/page_alloc.c
index f671401a7c0b..c9ad28a78018 100644
--- a/mm/page_alloc.c
+++ b/mm/page_alloc.c
@@ -7273,10 +7273,12 @@ void __init free_area_init_nodes(unsigned long *max_zone_pfn)
/* Print out the early node map */
pr_info("Early memory node ranges\n");
- for_each_mem_pfn_range(i, MAX_NUMNODES, &start_pfn, &end_pfn, &nid)
+ for_each_mem_pfn_range(i, MAX_NUMNODES, &start_pfn, &end_pfn, &nid) {
pr_info(" node %3d: [mem %#018Lx-%#018Lx]\n", nid,
(u64)start_pfn << PAGE_SHIFT,
((u64)end_pfn << PAGE_SHIFT) - 1);
+ section_active_init(start_pfn, end_pfn - start_pfn);
+ }
/* Initialise every node */
mminit_verify_pageflags_layout();
diff --git a/mm/sparse.c b/mm/sparse.c
index f87de7ad32c8..5ef2f884c4e1 100644
--- a/mm/sparse.c
+++ b/mm/sparse.c
@@ -210,6 +210,54 @@ static inline unsigned long first_present_section_nr(void)
return next_present_section_nr(-1);
}
+static unsigned long section_active_mask(unsigned long pfn,
+ unsigned long nr_pages)
+{
+ int idx_start, idx_size;
+ phys_addr_t start, size;
+
+ if (!nr_pages)
+ return 0;
+
+ start = PFN_PHYS(pfn);
+ size = PFN_PHYS(min(nr_pages, PAGES_PER_SECTION
+ - (pfn & ~PAGE_SECTION_MASK)));
+ size = ALIGN(size, SECTION_ACTIVE_SIZE);
+
+ idx_start = section_active_index(start);
+ idx_size = section_active_index(size);
+
+ if (idx_size == 0)
+ return -1;
+ return ((1UL << idx_size) - 1) << idx_start;
+}
+
+void section_active_init(unsigned long pfn, unsigned long nr_pages)
+{
+ int end_sec = pfn_to_section_nr(pfn + nr_pages - 1);
+ int i, start_sec = pfn_to_section_nr(pfn);
+
+ if (!nr_pages)
+ return;
+
+ for (i = start_sec; i <= end_sec; i++) {
+ struct mem_section *ms;
+ unsigned long mask;
+ unsigned long pfns;
+
+ pfns = min(nr_pages, PAGES_PER_SECTION
+ - (pfn & ~PAGE_SECTION_MASK));
+ mask = section_active_mask(pfn, pfns);
+
+ ms = __nr_to_section(i);
+ pr_debug("%s: sec: %d mask: %#018lx\n", __func__, i, mask);
+ ms->usage->map_active = mask;
+
+ pfn += pfns;
+ nr_pages -= pfns;
+ }
+}
+
/* Record a memory area against a node. */
void __init memory_present(int nid, unsigned long start, unsigned long end)
{
next prev parent reply other threads:[~2019-04-17 18:53 UTC|newest]
Thread overview: 53+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-04-17 18:38 [PATCH v6 00/12] mm: Sub-section memory hotplug support Dan Williams
2019-04-17 18:39 ` [PATCH v6 01/12] mm/sparsemem: Introduce struct mem_section_usage Dan Williams
2019-05-01 23:25 ` Pavel Tatashin
2019-05-02 6:07 ` Dan Williams
2019-05-02 14:16 ` Pavel Tatashin
2019-05-04 0:22 ` Dan Williams
2019-05-04 15:55 ` Pavel Tatashin
2019-04-17 18:39 ` [PATCH v6 02/12] mm/sparsemem: Introduce common definitions for the size and mask of a section Dan Williams
2019-05-02 14:53 ` Pavel Tatashin
2019-05-03 0:41 ` Dan Williams
2019-05-03 10:35 ` Robin Murphy
2019-05-03 12:57 ` Pavel Tatashin
2019-05-03 13:00 ` Oscar Salvador
2019-04-17 18:39 ` Dan Williams [this message]
2019-04-25 14:33 ` [PATCH v6 03/12] mm/sparsemem: Add helpers track active portions of a section at boot Oscar Salvador
2019-04-25 14:43 ` Oscar Salvador
2019-04-26 12:57 ` Oscar Salvador
2019-05-02 16:12 ` Pavel Tatashin
2019-05-04 19:26 ` Dan Williams
2019-04-17 18:39 ` [PATCH v6 04/12] mm/hotplug: Prepare shrink_{zone, pgdat}_span for sub-section removal Dan Williams
2019-04-19 23:09 ` Ralph Campbell
2019-04-19 23:13 ` Dan Williams
2019-04-26 13:59 ` Oscar Salvador
2019-04-26 14:00 ` Oscar Salvador
2019-05-02 19:18 ` Pavel Tatashin
2019-04-17 18:39 ` [PATCH v6 05/12] mm/sparsemem: Convert kmalloc_section_memmap() to populate_section_memmap() Dan Williams
2019-05-02 19:28 ` Pavel Tatashin
2019-04-17 18:39 ` [PATCH v6 06/12] mm/hotplug: Add mem-hotplug restrictions for remove_memory() Dan Williams
2019-04-23 21:21 ` David Hildenbrand
2019-04-24 18:07 ` Dan Williams
2019-04-17 18:39 ` [PATCH v6 07/12] mm: Kill is_dev_zone() helper Dan Williams
2019-04-17 20:17 ` David Hildenbrand
2019-04-26 14:04 ` Oscar Salvador
2019-05-02 20:37 ` Pavel Tatashin
2019-04-17 18:39 ` [PATCH v6 08/12] mm/sparsemem: Prepare for sub-section ranges Dan Williams
2019-05-02 21:25 ` Pavel Tatashin
2019-04-17 18:39 ` [PATCH v6 09/12] mm/sparsemem: Support sub-section hotplug Dan Williams
2019-04-17 18:39 ` [PATCH v6 10/12] mm/devm_memremap_pages: Enable sub-section remap Dan Williams
2019-04-17 18:39 ` [PATCH v6 11/12] libnvdimm/pfn: Fix fsdax-mode namespace info-block zero-fields Dan Williams
2019-04-17 22:02 ` Andrew Morton
2019-04-17 22:09 ` Dan Williams
2019-04-17 18:39 ` [PATCH v6 12/12] libnvdimm/pfn: Stop padding pmem namespaces to section alignment Dan Williams
2019-04-17 22:03 ` [PATCH v6 00/12] mm: Sub-section memory hotplug support Andrew Morton
2019-04-17 22:59 ` Dan Williams
2019-04-18 2:09 ` Dan Williams
2019-04-18 12:45 ` Jeff Moyer
2019-04-19 3:25 ` Dan Williams
2019-04-23 13:16 ` Oscar Salvador
2019-04-24 20:43 ` Pavel Tatashin
2019-05-02 22:46 ` Pavel Tatashin
2019-05-02 23:20 ` Dan Williams
2019-05-02 23:21 ` Dan Williams
2019-05-03 10:48 ` Oscar Salvador
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=155552635098.2015392.5460028594173939000.stgit@dwillia2-desk3.amr.corp.intel.com \
--to=dan.j.williams@intel.com \
--cc=akpm@linux-foundation.org \
--cc=david@redhat.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mm@kvack.org \
--cc=linux-nvdimm@lists.01.org \
--cc=logang@deltatee.com \
--cc=mhocko@suse.com \
--cc=vbabka@suse.cz \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).