From: Eric Anholt <eric@anholt.net>
To: dri-devel@lists.freedesktop.org
Cc: linux-kernel@vger.kernel.org,
Paul Kocialkowski <paul.kocialkowski@bootlin.com>,
Maxime Ripard <maxime.ripard@bootlin.com>,
david.emett@broadcom.com, thomas.spurden@broadcom.com,
Eric Anholt <eric@anholt.net>
Subject: [PATCH 3/4] drm/v3d: Dump V3D error debug registers in debugfs, and one at reset.
Date: Thu, 18 Apr 2019 17:10:13 -0700 [thread overview]
Message-ID: <20190419001014.23579-3-eric@anholt.net> (raw)
In-Reply-To: <20190419001014.23579-1-eric@anholt.net>
Looking at a hang recently, I noticed these registers that might tell
me if something obvious was wrong. They didn't help in this case, but
keep it around for the future.
Signed-off-by: Eric Anholt <eric@anholt.net>
---
drivers/gpu/drm/v3d/v3d_debugfs.c | 5 ++++
drivers/gpu/drm/v3d/v3d_gem.c | 4 +++-
drivers/gpu/drm/v3d/v3d_regs.h | 38 +++++++++++++++++++++++++++++++
3 files changed, 46 insertions(+), 1 deletion(-)
diff --git a/drivers/gpu/drm/v3d/v3d_debugfs.c b/drivers/gpu/drm/v3d/v3d_debugfs.c
index ab652a034959..78a78938e81f 100644
--- a/drivers/gpu/drm/v3d/v3d_debugfs.c
+++ b/drivers/gpu/drm/v3d/v3d_debugfs.c
@@ -58,6 +58,11 @@ static const struct v3d_reg_def v3d_core_reg_defs[] = {
REGDEF(V3D_GMP_STATUS),
REGDEF(V3D_GMP_CFG),
REGDEF(V3D_GMP_VIO_ADDR),
+
+ REGDEF(V3D_ERR_FDBGO),
+ REGDEF(V3D_ERR_FDBGB),
+ REGDEF(V3D_ERR_FDBGS),
+ REGDEF(V3D_ERR_STAT),
};
static const struct v3d_reg_def v3d_csd_reg_defs[] = {
diff --git a/drivers/gpu/drm/v3d/v3d_gem.c b/drivers/gpu/drm/v3d/v3d_gem.c
index f736e021467a..27e0f87075d9 100644
--- a/drivers/gpu/drm/v3d/v3d_gem.c
+++ b/drivers/gpu/drm/v3d/v3d_gem.c
@@ -109,7 +109,9 @@ v3d_reset(struct v3d_dev *v3d)
{
struct drm_device *dev = &v3d->drm;
- DRM_ERROR("Resetting GPU.\n");
+ DRM_DEV_ERROR(dev->dev, "Resetting GPU for hang.\n");
+ DRM_DEV_ERROR(dev->dev, "V3D_ERR_STAT: 0x%08x\n",
+ V3D_CORE_READ(0, V3D_ERR_STAT));
trace_v3d_reset_begin(dev);
/* XXX: only needed for safe powerdown, not reset. */
diff --git a/drivers/gpu/drm/v3d/v3d_regs.h b/drivers/gpu/drm/v3d/v3d_regs.h
index 54c8c4320da0..eda1e289976f 100644
--- a/drivers/gpu/drm/v3d/v3d_regs.h
+++ b/drivers/gpu/drm/v3d/v3d_regs.h
@@ -455,4 +455,42 @@
# define V3D_CSD_CURRENT_ID0_WG_Y_MASK V3D_MASK(15, 0)
# define V3D_CSD_CURRENT_ID0_WG_Y_SHIFT 0
+#define V3D_ERR_FDBGO 0x00f04
+#define V3D_ERR_FDBGB 0x00f08
+#define V3D_ERR_FDBGR 0x00f0c
+
+#define V3D_ERR_FDBGS 0x00f10
+# define V3D_ERR_FDBGS_INTERPZ_IP_STALL BIT(17)
+# define V3D_ERR_FDBGS_DEPTHO_FIFO_IP_STALL BIT(16)
+# define V3D_ERR_FDBGS_XYNRM_IP_STALL BIT(14)
+# define V3D_ERR_FDBGS_EZREQ_FIFO_OP_VALID BIT(13)
+# define V3D_ERR_FDBGS_QXYF_FIFO_OP_VALID BIT(12)
+# define V3D_ERR_FDBGS_QXYF_FIFO_OP_LAST BIT(11)
+# define V3D_ERR_FDBGS_EZTEST_ANYQVALID BIT(7)
+# define V3D_ERR_FDBGS_EZTEST_PASS BIT(6)
+# define V3D_ERR_FDBGS_EZTEST_QREADY BIT(5)
+# define V3D_ERR_FDBGS_EZTEST_VLF_OKNOVALID BIT(4)
+# define V3D_ERR_FDBGS_EZTEST_QSTALL BIT(3)
+# define V3D_ERR_FDBGS_EZTEST_IP_VLFSTALL BIT(2)
+# define V3D_ERR_FDBGS_EZTEST_IP_PRSTALL BIT(1)
+# define V3D_ERR_FDBGS_EZTEST_IP_QSTALL BIT(0)
+
+#define V3D_ERR_STAT 0x00f20
+# define V3D_ERR_L2CARE BIT(15)
+# define V3D_ERR_VCMBE BIT(14)
+# define V3D_ERR_VCMRE BIT(13)
+# define V3D_ERR_VCDI BIT(12)
+# define V3D_ERR_VCDE BIT(11)
+# define V3D_ERR_VDWE BIT(10)
+# define V3D_ERR_VPMEAS BIT(9)
+# define V3D_ERR_VPMEFNA BIT(8)
+# define V3D_ERR_VPMEWNA BIT(7)
+# define V3D_ERR_VPMERNA BIT(6)
+# define V3D_ERR_VPMERR BIT(5)
+# define V3D_ERR_VPMEWR BIT(4)
+# define V3D_ERR_VPAERRGL BIT(3)
+# define V3D_ERR_VPAEBRGL BIT(2)
+# define V3D_ERR_VPAERGS BIT(1)
+# define V3D_ERR_VPAEABB BIT(0)
+
#endif /* V3D_REGS_H */
--
2.20.1
next prev parent reply other threads:[~2019-04-19 0:10 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-04-19 0:10 [PATCH 1/4] drm/v3d: Fix debugfs reads of MMU regs Eric Anholt
2019-04-19 0:10 ` [PATCH 2/4] drm/v3d: Set the correct DMA mask according to the MMU's limits Eric Anholt
2019-04-19 8:47 ` Paul Kocialkowski
2019-04-19 0:10 ` Eric Anholt [this message]
2019-04-19 8:48 ` [PATCH 3/4] drm/v3d: Dump V3D error debug registers in debugfs, and one at reset Paul Kocialkowski
2019-04-19 0:10 ` [PATCH 4/4] drm/v3d: Fix and extend MMU error handling Eric Anholt
2019-04-19 8:52 ` Paul Kocialkowski
2019-04-19 8:47 ` [PATCH 1/4] drm/v3d: Fix debugfs reads of MMU regs Paul Kocialkowski
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190419001014.23579-3-eric@anholt.net \
--to=eric@anholt.net \
--cc=david.emett@broadcom.com \
--cc=dri-devel@lists.freedesktop.org \
--cc=linux-kernel@vger.kernel.org \
--cc=maxime.ripard@bootlin.com \
--cc=paul.kocialkowski@bootlin.com \
--cc=thomas.spurden@broadcom.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).