From: Mason Yang <masonccyang@mxic.com.tw>
To: broonie@kernel.org, marek.vasut@gmail.com,
linux-kernel@vger.kernel.org, linux-spi@vger.kernel.org,
bbrezillon@kernel.org, linux-renesas-soc@vger.kernel.org,
Geert Uytterhoeven <geert+renesas@glider.be>,
lee.jones@linaro.org, sergei.shtylyov@cogentembedded.com,
robh+dt@kernel.org, mark.rutland@arm.com,
devicetree@vger.kernel.org
Cc: juliensu@mxic.com.tw, Simon Horman <horms@verge.net.au>,
Mason Yang <masonccyang@mxic.com.tw>,
zhengxunli@mxic.com.tw
Subject: [PATCH v11 3/3] dt-bindings: mfd: Document Renesas R-Car Gen3 RPC-IF MFD bindings
Date: Mon, 22 Apr 2019 11:32:05 +0800 [thread overview]
Message-ID: <1555903925-15292-4-git-send-email-masonccyang@mxic.com.tw> (raw)
In-Reply-To: <1555903925-15292-1-git-send-email-masonccyang@mxic.com.tw>
Document the bindings used by the Renesas R-Car Gen3 RPC-IF MFD.
Signed-off-by: Mason Yang <masonccyang@mxic.com.tw>
---
.../devicetree/bindings/mfd/mfd-renesas-rpc.txt | 39 ++++++++++++++++++++++
1 file changed, 39 insertions(+)
create mode 100644 Documentation/devicetree/bindings/mfd/mfd-renesas-rpc.txt
diff --git a/Documentation/devicetree/bindings/mfd/mfd-renesas-rpc.txt b/Documentation/devicetree/bindings/mfd/mfd-renesas-rpc.txt
new file mode 100644
index 0000000..ee3bad8
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/mfd-renesas-rpc.txt
@@ -0,0 +1,39 @@
+Renesas R-Car Gen3 RPC-IF MFD controller Device Tree Bindings
+-------------------------------------------------------------
+
+Required properties:
+- compatible: should be an SoC-specific compatible value, followed by
+ "renesas,rcar-gen3-rpc" as a fallback.
+ supported SoC-specific values are:
+ "renesas,r8a77995-rpc" (R-Car D3)
+- reg: should contain three register areas:
+ first for the base address of rpc-if registers,
+ second for the direct mapping read mode and
+ third for the write buffer area.
+- reg-names: should contain "regs", "dirmap" and "wbuf"
+- clocks: should contain 1 entries for the module's clock
+- clock-names: should contain "rpc"
+- #address-cells: should be 1
+- #size-cells: should be 0
+
+Example:
+
+ rpc: rpc-if@ee200000 {
+ compatible = "renesas,r8a77995-rpc", "renesas,rcar-gen3-rpc";
+ reg = <0 0xee200000 0 0x200>, <0 0x08000000 0 0x4000000>;
+ reg-names = "regs", "dirmap";
+ clocks = <&cpg CPG_MOD 917>;
+ clock-names = "rpc";
+ power-domains = <&sysc R8A77995_PD_ALWAYS_ON>;
+ resets = <&cpg 917>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ flash@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <40000000>;
+ spi-tx-bus-width = <1>;
+ spi-rx-bus-width = <1>;
+ };
+ };
--
1.9.1
next prev parent reply other threads:[~2019-04-22 3:11 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-04-22 3:32 [PATCH v11 0/3] mfd: Add Renesas R-Car Gen3 RPC-IF MFD & SPI driver Mason Yang
2019-04-22 3:32 ` [PATCH v11 1/3] mfd: Add Renesas R-Car Gen3 RPC-IF MFD driver Mason Yang
2019-04-22 3:32 ` [PATCH v11 2/3] spi: Add Renesas R-Car Gen3 RPC-IF SPI controller driver Mason Yang
2019-04-22 18:32 ` Sergei Shtylyov
2019-04-22 19:00 ` Sergei Shtylyov
[not found] ` <OFF96C004A.0EFDDD69-ON482583E5.0032EE18-482583E5.00337F42@mxic.com.tw>
2019-04-23 16:09 ` Sergei Shtylyov
2019-04-22 3:32 ` Mason Yang [this message]
2019-04-22 11:45 ` [PATCH v11 3/3] dt-bindings: mfd: Document Renesas R-Car Gen3 RPC-IF MFD bindings Sergei Shtylyov
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1555903925-15292-4-git-send-email-masonccyang@mxic.com.tw \
--to=masonccyang@mxic.com.tw \
--cc=bbrezillon@kernel.org \
--cc=broonie@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=geert+renesas@glider.be \
--cc=horms@verge.net.au \
--cc=juliensu@mxic.com.tw \
--cc=lee.jones@linaro.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-renesas-soc@vger.kernel.org \
--cc=linux-spi@vger.kernel.org \
--cc=marek.vasut@gmail.com \
--cc=mark.rutland@arm.com \
--cc=robh+dt@kernel.org \
--cc=sergei.shtylyov@cogentembedded.com \
--cc=zhengxunli@mxic.com.tw \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).