linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Grygorii Strashko <grygorii.strashko@ti.com>
To: <netdev@vger.kernel.org>,
	Ilias Apalodimas <ilias.apalodimas@linaro.org>,
	Andrew Lunn <andrew@lunn.ch>,
	"David S . Miller" <davem@davemloft.net>,
	Ivan Khoronzhuk <ivan.khoronzhuk@linaro.org>,
	Jiri Pirko <jiri@resnulli.us>
Cc: Florian Fainelli <f.fainelli@gmail.com>,
	Sekhar Nori <nsekhar@ti.com>, <linux-kernel@vger.kernel.org>,
	<linux-omap@vger.kernel.org>,
	Murali Karicheri <m-karicheri2@ti.com>,
	Ivan Vecera <ivecera@redhat.com>,
	Grygorii Strashko <grygorii.strashko@ti.com>
Subject: [RFC PATCH v3 net-next 04/11] net: ethernet: ti: cpsw: allow untagged traffic on host port
Date: Thu, 25 Apr 2019 01:24:20 +0300	[thread overview]
Message-ID: <1556144667-27997-5-git-send-email-grygorii.strashko@ti.com> (raw)
In-Reply-To: <1556144667-27997-1-git-send-email-grygorii.strashko@ti.com>

Now untagged vlan traffic is not supported on Host P0 port. This patch adds
in ALE context bitmap of VLANs for which Host P0 port bit set in Force
Untagged Packet Egress bitmask in VLANs ALE entries, and adds corresponding
check in VLAN incapsulation header parsing function cpsw_rx_vlan_encap().

Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
---
 drivers/net/ethernet/ti/cpsw.c     | 17 ++++++++---------
 drivers/net/ethernet/ti/cpsw_ale.c | 24 +++++++++++++++++++++---
 drivers/net/ethernet/ti/cpsw_ale.h |  5 +++++
 3 files changed, 34 insertions(+), 12 deletions(-)

diff --git a/drivers/net/ethernet/ti/cpsw.c b/drivers/net/ethernet/ti/cpsw.c
index 2998a45e01e8..86e23468c51f 100644
--- a/drivers/net/ethernet/ti/cpsw.c
+++ b/drivers/net/ethernet/ti/cpsw.c
@@ -329,17 +329,16 @@ static void cpsw_rx_vlan_encap(struct sk_buff *skb)
 	/* Ignore vid 0 and pass packet as is */
 	if (!vid)
 		return;
-	/* Ignore default vlans in dual mac mode */
-	if (cpsw->data.dual_emac &&
-	    vid == cpsw->slaves[priv->emac_port].port_vlan)
-		return;
 
-	prio = (rx_vlan_encap_hdr >>
-		CPSW_RX_VLAN_ENCAP_HDR_PRIO_SHIFT) &
-		CPSW_RX_VLAN_ENCAP_HDR_PRIO_MSK;
+	/* Untag P0 packets if set for vlan */
+	if (!cpsw_ale_get_vlan_p0_untag(cpsw->ale, vid)) {
+		prio = (rx_vlan_encap_hdr >>
+			CPSW_RX_VLAN_ENCAP_HDR_PRIO_SHIFT) &
+			CPSW_RX_VLAN_ENCAP_HDR_PRIO_MSK;
 
-	vtag = (prio << VLAN_PRIO_SHIFT) | vid;
-	__vlan_hwaccel_put_tag(skb, htons(ETH_P_8021Q), vtag);
+		vtag = (prio << VLAN_PRIO_SHIFT) | vid;
+		__vlan_hwaccel_put_tag(skb, htons(ETH_P_8021Q), vtag);
+	}
 
 	/* strip vlan tag for VLAN-tagged packet */
 	if (pkt_type == CPSW_RX_VLAN_ENCAP_HDR_PKT_VLAN_TAG) {
diff --git a/drivers/net/ethernet/ti/cpsw_ale.c b/drivers/net/ethernet/ti/cpsw_ale.c
index add3f6e4917b..529768484115 100644
--- a/drivers/net/ethernet/ti/cpsw_ale.c
+++ b/drivers/net/ethernet/ti/cpsw_ale.c
@@ -5,6 +5,8 @@
  * Copyright (C) 2012 Texas Instruments
  *
  */
+#include <linux/bitmap.h>
+#include <linux/if_vlan.h>
 #include <linux/kernel.h>
 #include <linux/module.h>
 #include <linux/platform_device.h>
@@ -500,6 +502,17 @@ static int cpsw_ale_read_reg_unreg_mc(struct cpsw_ale *ale, u16 vid, bool unreg)
 	return ret;
 }
 
+void cpsw_ale_set_vlan_untag(struct cpsw_ale *ale, u32 *ale_entry,
+			     u16 vid, int untag_mask)
+{
+	cpsw_ale_set_vlan_untag_force(ale_entry,
+				      untag_mask, ale->vlan_field_bits);
+	if (untag_mask & ALE_PORT_HOST)
+		bitmap_set(ale->p0_untag_vid_mask, vid, 1);
+	else
+		bitmap_clear(ale->p0_untag_vid_mask, vid, 1);
+}
+
 int cpsw_ale_add_vlan(struct cpsw_ale *ale, u16 vid, int port, int untag,
 		      int reg_mcast, int unreg_mcast)
 {
@@ -512,8 +525,8 @@ int cpsw_ale_add_vlan(struct cpsw_ale *ale, u16 vid, int port, int untag,
 
 	cpsw_ale_set_entry_type(ale_entry, ALE_TYPE_VLAN);
 	cpsw_ale_set_vlan_id(ale_entry, vid);
+	cpsw_ale_set_vlan_untag(ale, ale_entry, vid, untag);
 
-	cpsw_ale_set_vlan_untag_force(ale_entry, untag, ale->vlan_field_bits);
 	if (!ale->params.nu_switch_ale) {
 		cpsw_ale_set_vlan_reg_mcast(ale_entry, reg_mcast,
 					    ale->vlan_field_bits);
@@ -552,8 +565,8 @@ int cpsw_ale_del_vlan(struct cpsw_ale *ale, u16 vid, int port_mask)
 	cpsw_ale_read(ale, idx, ale_entry);
 
 	if (port_mask) {
-		cpsw_ale_set_vlan_untag_force(ale_entry, untag,
-					      ale->vlan_field_bits);
+		cpsw_ale_set_vlan_untag(ale, ale_entry, vid, untag);
+
 		if (!ale->params.nu_switch_ale) {
 			cpsw_ale_set_vlan_reg_mcast(ale_entry, reg_mcast,
 						    ale->vlan_field_bits);
@@ -973,6 +986,11 @@ struct cpsw_ale *cpsw_ale_create(struct cpsw_ale_params *params)
 	if (!ale)
 		return NULL;
 
+	ale->p0_untag_vid_mask =
+		devm_kmalloc_array(params->dev, BITS_TO_LONGS(VLAN_N_VID),
+				   sizeof(unsigned long),
+				   GFP_KERNEL);
+
 	ale->params = *params;
 	ale->ageout = ale->params.ale_ageout * HZ;
 
diff --git a/drivers/net/ethernet/ti/cpsw_ale.h b/drivers/net/ethernet/ti/cpsw_ale.h
index b5ac8cc7c677..4493bd8ed58f 100644
--- a/drivers/net/ethernet/ti/cpsw_ale.h
+++ b/drivers/net/ethernet/ti/cpsw_ale.h
@@ -36,6 +36,7 @@ struct cpsw_ale {
 	u32			port_mask_bits;
 	u32			port_num_bits;
 	u32			vlan_field_bits;
+	unsigned long		*p0_untag_vid_mask;
 };
 
 enum cpsw_ale_control {
@@ -126,4 +127,8 @@ int cpsw_ale_mcast_del_modify(struct cpsw_ale *ale, u8 *addr, int port,
 void cpsw_ale_set_unreg_mcast(struct cpsw_ale *ale, int unreg_mcast_mask,
 			      bool add);
 
+static inline int cpsw_ale_get_vlan_p0_untag(struct cpsw_ale *ale, u16 vid)
+{
+	return test_bit(vid, ale->p0_untag_vid_mask);
+}
 #endif
-- 
2.17.1


  parent reply	other threads:[~2019-04-24 22:24 UTC|newest]

Thread overview: 20+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-04-24 22:24 [RFC PATCH v3 net-next 00/11] net: ethernet: ti: introduce new cpsw switchdev based driver Grygorii Strashko
2019-04-24 22:24 ` [RFC PATCH v3 net-next 01/11] net: ethernet: ti: cpts: use devm_get_clk_from_child Grygorii Strashko
2019-04-24 22:46   ` Andrew Lunn
2019-04-25 10:05     ` Grygorii Strashko
2019-04-25 12:18       ` Andrew Lunn
2019-04-24 22:24 ` [RFC PATCH v3 net-next 02/11] net: ethernet: ti: cpsw: move set of common functions in cpsw_priv Grygorii Strashko
2019-04-24 22:24 ` [RFC PATCH v3 net-next 03/11] net: ethernet: ti: cpsw: ale: add functions to modify VLANs/MDBs Grygorii Strashko
2019-04-26 10:41   ` Ivan Khoronzhuk
2019-04-26 10:53     ` Ilias Apalodimas
2019-04-24 22:24 ` Grygorii Strashko [this message]
2019-04-24 22:24 ` [RFC PATCH v3 net-next 05/11] net: ethernet: ti: cpsw: add switchdev API for cpsw driver Grygorii Strashko
2019-04-24 22:24 ` [RFC PATCH v3 net-next 06/11] dt-bindings: net: ti: add new cpsw switch driver bindings Grygorii Strashko
2019-04-25 22:40   ` Andrew Lunn
2019-04-26  7:50     ` Grygorii Strashko
2019-04-24 22:24 ` [RFC PATCH v3 net-next 07/11] net: ethernet: ti: cpsw: introduce cpsw switch driver based on switchdev Grygorii Strashko
2019-04-25 23:44   ` Andrew Lunn
2019-04-24 22:24 ` [RFC PATCH v3 net-next 08/11] net: ethernet: ti: cpsw: fix build of cpsw drivers Grygorii Strashko
2019-04-24 22:24 ` [RFC PATCH v3 net-next 09/11] phy: ti: phy-gmii-sel: dependency from ti cpsw-switchdev driver Grygorii Strashko
2019-04-24 22:24 ` [RFC PATCH v3 net-next 10/11] Documentation: networking: add cpsw switchdev based driver documentation Grygorii Strashko
2019-04-24 22:24 ` [RFC PATCH v3 net-next 11/11] ARM: dts: am57xx-idk: add dt nodes for new cpsw switch dev driver Grygorii Strashko

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1556144667-27997-5-git-send-email-grygorii.strashko@ti.com \
    --to=grygorii.strashko@ti.com \
    --cc=andrew@lunn.ch \
    --cc=davem@davemloft.net \
    --cc=f.fainelli@gmail.com \
    --cc=ilias.apalodimas@linaro.org \
    --cc=ivan.khoronzhuk@linaro.org \
    --cc=ivecera@redhat.com \
    --cc=jiri@resnulli.us \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-omap@vger.kernel.org \
    --cc=m-karicheri2@ti.com \
    --cc=netdev@vger.kernel.org \
    --cc=nsekhar@ti.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).