From: "Gustavo A. R. Silva" <gustavo@embeddedor.com>
To: Jeff Kirsher <jeffrey.t.kirsher@intel.com>,
"David S. Miller" <davem@davemloft.net>
Cc: intel-wired-lan@lists.osuosl.org, netdev@vger.kernel.org,
linux-kernel@vger.kernel.org,
"Gustavo A. R. Silva" <gustavo@embeddedor.com>
Subject: [PATCH][next] iavf: use struct_size() helper
Date: Wed, 1 May 2019 12:17:59 -0500 [thread overview]
Message-ID: <20190501171759.GA3494@embeddedor> (raw)
Make use of the struct_size() helper instead of an open-coded version
in order to avoid any potential type mistakes, in particular in the
context in which this code is being used.
So, replace code of the following form:
sizeof(struct virtchnl_ether_addr_list) + (count * sizeof(struct virtchnl_ether_addr))
with:
struct_size(veal, list, count)
and so on...
This code was detected with the help of Coccinelle.
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
---
.../net/ethernet/intel/iavf/iavf_virtchnl.c | 37 ++++++++-----------
1 file changed, 16 insertions(+), 21 deletions(-)
diff --git a/drivers/net/ethernet/intel/iavf/iavf_virtchnl.c b/drivers/net/ethernet/intel/iavf/iavf_virtchnl.c
index e64751da0921..9c80bf972b90 100644
--- a/drivers/net/ethernet/intel/iavf/iavf_virtchnl.c
+++ b/drivers/net/ethernet/intel/iavf/iavf_virtchnl.c
@@ -242,7 +242,8 @@ void iavf_configure_queues(struct iavf_adapter *adapter)
struct virtchnl_vsi_queue_config_info *vqci;
struct virtchnl_queue_pair_info *vqpi;
int pairs = adapter->num_active_queues;
- int i, len, max_frame = IAVF_MAX_RXBUFFER;
+ int i, max_frame = IAVF_MAX_RXBUFFER;
+ size_t len;
if (adapter->current_op != VIRTCHNL_OP_UNKNOWN) {
/* bail because we already have a command pending */
@@ -251,8 +252,7 @@ void iavf_configure_queues(struct iavf_adapter *adapter)
return;
}
adapter->current_op = VIRTCHNL_OP_CONFIG_VSI_QUEUES;
- len = sizeof(struct virtchnl_vsi_queue_config_info) +
- (sizeof(struct virtchnl_queue_pair_info) * pairs);
+ len = struct_size(vqci, qpair, pairs);
vqci = kzalloc(len, GFP_KERNEL);
if (!vqci)
return;
@@ -351,7 +351,8 @@ void iavf_map_queues(struct iavf_adapter *adapter)
{
struct virtchnl_irq_map_info *vimi;
struct virtchnl_vector_map *vecmap;
- int v_idx, q_vectors, len;
+ int v_idx, q_vectors;
+ size_t len;
struct iavf_q_vector *q_vector;
if (adapter->current_op != VIRTCHNL_OP_UNKNOWN) {
@@ -364,9 +365,7 @@ void iavf_map_queues(struct iavf_adapter *adapter)
q_vectors = adapter->num_msix_vectors - NONQ_VECS;
- len = sizeof(struct virtchnl_irq_map_info) +
- (adapter->num_msix_vectors *
- sizeof(struct virtchnl_vector_map));
+ len = struct_size(vimi, vecmap, adapter->num_msix_vectors);
vimi = kzalloc(len, GFP_KERNEL);
if (!vimi)
return;
@@ -433,9 +432,10 @@ int iavf_request_queues(struct iavf_adapter *adapter, int num)
void iavf_add_ether_addrs(struct iavf_adapter *adapter)
{
struct virtchnl_ether_addr_list *veal;
- int len, i = 0, count = 0;
+ int i = 0, count = 0;
struct iavf_mac_filter *f;
bool more = false;
+ size_t len;
if (adapter->current_op != VIRTCHNL_OP_UNKNOWN) {
/* bail because we already have a command pending */
@@ -457,15 +457,13 @@ void iavf_add_ether_addrs(struct iavf_adapter *adapter)
}
adapter->current_op = VIRTCHNL_OP_ADD_ETH_ADDR;
- len = sizeof(struct virtchnl_ether_addr_list) +
- (count * sizeof(struct virtchnl_ether_addr));
+ len = struct_size(veal, list, count);
if (len > IAVF_MAX_AQ_BUF_SIZE) {
dev_warn(&adapter->pdev->dev, "Too many add MAC changes in one request\n");
count = (IAVF_MAX_AQ_BUF_SIZE -
sizeof(struct virtchnl_ether_addr_list)) /
sizeof(struct virtchnl_ether_addr);
- len = sizeof(struct virtchnl_ether_addr_list) +
- (count * sizeof(struct virtchnl_ether_addr));
+ len = struct_size(veal, list, count);
more = true;
}
@@ -505,8 +503,9 @@ void iavf_del_ether_addrs(struct iavf_adapter *adapter)
{
struct virtchnl_ether_addr_list *veal;
struct iavf_mac_filter *f, *ftmp;
- int len, i = 0, count = 0;
+ int i = 0, count = 0;
bool more = false;
+ size_t len;
if (adapter->current_op != VIRTCHNL_OP_UNKNOWN) {
/* bail because we already have a command pending */
@@ -528,15 +527,13 @@ void iavf_del_ether_addrs(struct iavf_adapter *adapter)
}
adapter->current_op = VIRTCHNL_OP_DEL_ETH_ADDR;
- len = sizeof(struct virtchnl_ether_addr_list) +
- (count * sizeof(struct virtchnl_ether_addr));
+ len = struct_size(veal, list, count);
if (len > IAVF_MAX_AQ_BUF_SIZE) {
dev_warn(&adapter->pdev->dev, "Too many delete MAC changes in one request\n");
count = (IAVF_MAX_AQ_BUF_SIZE -
sizeof(struct virtchnl_ether_addr_list)) /
sizeof(struct virtchnl_ether_addr);
- len = sizeof(struct virtchnl_ether_addr_list) +
- (count * sizeof(struct virtchnl_ether_addr));
+ len = struct_size(veal, list, count);
more = true;
}
veal = kzalloc(len, GFP_ATOMIC);
@@ -973,7 +970,7 @@ static void iavf_print_link_message(struct iavf_adapter *adapter)
void iavf_enable_channels(struct iavf_adapter *adapter)
{
struct virtchnl_tc_info *vti = NULL;
- u16 len;
+ size_t len;
int i;
if (adapter->current_op != VIRTCHNL_OP_UNKNOWN) {
@@ -983,9 +980,7 @@ void iavf_enable_channels(struct iavf_adapter *adapter)
return;
}
- len = (adapter->num_tc * sizeof(struct virtchnl_channel_info)) +
- sizeof(struct virtchnl_tc_info);
-
+ len = struct_size(vti, list, adapter->num_tc);
vti = kzalloc(len, GFP_KERNEL);
if (!vti)
return;
--
2.21.0
next reply other threads:[~2019-05-01 17:18 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-05-01 17:17 Gustavo A. R. Silva [this message]
2019-05-01 23:56 ` [PATCH][next] iavf: use struct_size() helper Allan, Bruce W
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190501171759.GA3494@embeddedor \
--to=gustavo@embeddedor.com \
--cc=davem@davemloft.net \
--cc=intel-wired-lan@lists.osuosl.org \
--cc=jeffrey.t.kirsher@intel.com \
--cc=linux-kernel@vger.kernel.org \
--cc=netdev@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).