linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Dan Williams <dan.j.williams@intel.com>
To: akpm@linux-foundation.org
Cc: Michal Hocko <mhocko@suse.com>, Vlastimil Babka <vbabka@suse.cz>,
	Logan Gunthorpe <logang@deltatee.com>,
	Oscar Salvador <osalvador@suse.de>,
	Pavel Tatashin <pasha.tatashin@soleen.com>,
	Jane Chu <jane.chu@oracle.com>,
	linux-nvdimm@lists.01.org, linux-mm@kvack.org,
	linux-kernel@vger.kernel.org, osalvador@suse.de, mhocko@suse.com
Subject: [PATCH v8 03/12] mm/sparsemem: Add helpers track active portions of a section at boot
Date: Mon, 06 May 2019 16:39:42 -0700	[thread overview]
Message-ID: <155718598213.130019.10989541248734713186.stgit@dwillia2-desk3.amr.corp.intel.com> (raw)
In-Reply-To: <155718596657.130019.17139634728875079809.stgit@dwillia2-desk3.amr.corp.intel.com>

Prepare for hot{plug,remove} of sub-ranges of a section by tracking a
sub-section active bitmask, each bit representing a PMD_SIZE span of the
architecture's memory hotplug section size.

The implications of a partially populated section is that pfn_valid()
needs to go beyond a valid_section() check and read the sub-section
active ranges from the bitmask. The expectation is that the bitmask
(subsection_map) fits in the same cacheline as the valid_section() data,
so the incremental performance overhead to pfn_valid() should be
negligible.

Cc: Michal Hocko <mhocko@suse.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Logan Gunthorpe <logang@deltatee.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Pavel Tatashin <pasha.tatashin@soleen.com>
Tested-by: Jane Chu <jane.chu@oracle.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
---
 include/linux/mmzone.h |   29 ++++++++++++++++++++++++++++-
 mm/page_alloc.c        |    4 +++-
 mm/sparse.c            |   29 +++++++++++++++++++++++++++++
 3 files changed, 60 insertions(+), 2 deletions(-)

diff --git a/include/linux/mmzone.h b/include/linux/mmzone.h
index ac163f2f274f..6dd52d544857 100644
--- a/include/linux/mmzone.h
+++ b/include/linux/mmzone.h
@@ -1199,6 +1199,8 @@ struct mem_section_usage {
 	unsigned long pageblock_flags[0];
 };
 
+void subsection_map_init(unsigned long pfn, unsigned long nr_pages);
+
 struct page;
 struct page_ext;
 struct mem_section {
@@ -1336,12 +1338,36 @@ static inline struct mem_section *__pfn_to_section(unsigned long pfn)
 
 extern int __highest_present_section_nr;
 
+static inline int subsection_map_index(unsigned long pfn)
+{
+	return (pfn & ~(PAGE_SECTION_MASK)) / PAGES_PER_SUBSECTION;
+}
+
+#ifdef CONFIG_SPARSEMEM_VMEMMAP
+static inline int pfn_section_valid(struct mem_section *ms, unsigned long pfn)
+{
+	int idx = subsection_map_index(pfn);
+
+	return test_bit(idx, ms->usage->subsection_map);
+}
+#else
+static inline int pfn_section_valid(struct mem_section *ms, unsigned long pfn)
+{
+	return 1;
+}
+#endif
+
 #ifndef CONFIG_HAVE_ARCH_PFN_VALID
 static inline int pfn_valid(unsigned long pfn)
 {
+	struct mem_section *ms;
+
 	if (pfn_to_section_nr(pfn) >= NR_MEM_SECTIONS)
 		return 0;
-	return valid_section(__nr_to_section(pfn_to_section_nr(pfn)));
+	ms = __nr_to_section(pfn_to_section_nr(pfn));
+	if (!valid_section(ms))
+		return 0;
+	return pfn_section_valid(ms, pfn);
 }
 #endif
 
@@ -1373,6 +1399,7 @@ void sparse_init(void);
 #define sparse_init()	do {} while (0)
 #define sparse_index_init(_sec, _nid)  do {} while (0)
 #define pfn_present pfn_valid
+#define subsection_map_init(_pfn, _nr_pages) do {} while (0)
 #endif /* CONFIG_SPARSEMEM */
 
 /*
diff --git a/mm/page_alloc.c b/mm/page_alloc.c
index 61c2b54a5b61..13816c5a51eb 100644
--- a/mm/page_alloc.c
+++ b/mm/page_alloc.c
@@ -7291,10 +7291,12 @@ void __init free_area_init_nodes(unsigned long *max_zone_pfn)
 
 	/* Print out the early node map */
 	pr_info("Early memory node ranges\n");
-	for_each_mem_pfn_range(i, MAX_NUMNODES, &start_pfn, &end_pfn, &nid)
+	for_each_mem_pfn_range(i, MAX_NUMNODES, &start_pfn, &end_pfn, &nid) {
 		pr_info("  node %3d: [mem %#018Lx-%#018Lx]\n", nid,
 			(u64)start_pfn << PAGE_SHIFT,
 			((u64)end_pfn << PAGE_SHIFT) - 1);
+		subsection_map_init(start_pfn, end_pfn - start_pfn);
+	}
 
 	/* Initialise every node */
 	mminit_verify_pageflags_layout();
diff --git a/mm/sparse.c b/mm/sparse.c
index f87de7ad32c8..ac47a48050c7 100644
--- a/mm/sparse.c
+++ b/mm/sparse.c
@@ -210,6 +210,35 @@ static inline unsigned long first_present_section_nr(void)
 	return next_present_section_nr(-1);
 }
 
+void subsection_map_init(unsigned long pfn, unsigned long nr_pages)
+{
+	int end_sec = pfn_to_section_nr(pfn + nr_pages - 1);
+	int i, start_sec = pfn_to_section_nr(pfn);
+
+	if (!nr_pages)
+		return;
+
+	for (i = start_sec; i <= end_sec; i++) {
+		int idx, end;
+		unsigned long pfns;
+		struct mem_section *ms;
+
+		idx = subsection_map_index(pfn);
+		pfns = min(nr_pages, PAGES_PER_SECTION
+				- (pfn & ~PAGE_SECTION_MASK));
+		end = subsection_map_index(pfn + pfns - 1);
+
+		ms = __nr_to_section(i);
+		bitmap_set(ms->usage->subsection_map, idx, end - idx + 1);
+
+		pr_debug("%s: sec: %d pfns: %ld set(%d, %d)\n", __func__, i,
+				pfns, idx, end - idx + 1);
+
+		pfn += pfns;
+		nr_pages -= pfns;
+	}
+}
+
 /* Record a memory area against a node. */
 void __init memory_present(int nid, unsigned long start, unsigned long end)
 {


  parent reply	other threads:[~2019-05-06 23:53 UTC|newest]

Thread overview: 23+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-05-06 23:39 [PATCH v8 00/12] mm: Sub-section memory hotplug support Dan Williams
2019-05-06 23:39 ` [PATCH v8 01/12] mm/sparsemem: Introduce struct mem_section_usage Dan Williams
2019-05-10 13:30   ` osalvador
2019-05-10 19:38     ` Dan Williams
2019-05-06 23:39 ` [PATCH v8 02/12] mm/memremap: Rename and consolidate SECTION_SIZE Dan Williams
2019-05-06 23:39 ` Dan Williams [this message]
2019-05-10 12:56   ` [PATCH v8 03/12] mm/sparsemem: Add helpers track active portions of a section at boot osalvador
2019-05-06 23:39 ` [PATCH v8 04/12] mm/hotplug: Prepare shrink_{zone, pgdat}_span for sub-section removal Dan Williams
2019-05-06 23:39 ` [PATCH v8 05/12] mm/sparsemem: Convert kmalloc_section_memmap() to populate_section_memmap() Dan Williams
2019-05-06 23:39 ` [PATCH v8 06/12] mm/hotplug: Kill is_dev_zone() usage in __remove_pages() Dan Williams
2019-05-06 23:40 ` [PATCH v8 07/12] mm: Kill is_dev_zone() helper Dan Williams
2019-05-06 23:40 ` [PATCH v8 08/12] mm/sparsemem: Prepare for sub-section ranges Dan Williams
2019-05-10 13:00   ` osalvador
2019-05-06 23:40 ` [PATCH v8 09/12] mm/sparsemem: Support sub-section hotplug Dan Williams
2019-05-08 23:15   ` Oscar Salvador
2019-05-13 13:54   ` Oscar Salvador
2019-06-04  4:47     ` Dan Williams
2019-05-06 23:40 ` [PATCH v8 10/12] mm/devm_memremap_pages: Enable sub-section remap Dan Williams
2019-05-06 23:40 ` [PATCH v8 11/12] libnvdimm/pfn: Fix fsdax-mode namespace info-block zero-fields Dan Williams
2019-05-06 23:40 ` [PATCH v8 12/12] libnvdimm/pfn: Stop padding pmem namespaces to section alignment Dan Williams
2019-05-13 21:01 ` [PATCH v8 00/12] mm: Sub-section memory hotplug support Mike Rapoport
2019-05-13 21:11   ` Dan Williams
2019-06-04  7:41 ` Oscar Salvador

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=155718598213.130019.10989541248734713186.stgit@dwillia2-desk3.amr.corp.intel.com \
    --to=dan.j.williams@intel.com \
    --cc=akpm@linux-foundation.org \
    --cc=jane.chu@oracle.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mm@kvack.org \
    --cc=linux-nvdimm@lists.01.org \
    --cc=logang@deltatee.com \
    --cc=mhocko@suse.com \
    --cc=osalvador@suse.de \
    --cc=pasha.tatashin@soleen.com \
    --cc=vbabka@suse.cz \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).