From: Ulf Hansson <ulf.hansson@linaro.org>
To: Linus <torvalds@linux-foundation.org>,
linux-mmc@vger.kernel.org, linux-kernel@vger.kernel.org
Cc: Ulf Hansson <ulf.hansson@linaro.org>
Subject: [GIT PULL] MMC and MEMSTICK updates for v5.2
Date: Tue, 7 May 2019 08:36:34 +0200 [thread overview]
Message-ID: <20190507063634.8389-1-ulf.hansson@linaro.org> (raw)
Hi Linus,
Here's the PR with MMC updates for v5.1. This time and onwards I will continue
to include changes also for the MEMSTICK subsystem in the PR, please tell me if
you prefer another setup.
Details about the highlights are as usual found in the signed tag.
Please pull this in!
Kind regards
Ulf Hansson
The following changes since commit dc4060a5dc2557e6b5aa813bf5b73677299d62d2:
Linux 5.1-rc5 (2019-04-14 15:17:41 -0700)
are available in the Git repository at:
git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc.git tags/mmc-v5.2
for you to fetch changes up to 0a49a619e7e1aeb3f5f5511ca59314423c83dae2:
mmc: sdhci-pci: Fix BYT OCP setting (2019-05-06 12:33:03 +0200)
----------------------------------------------------------------
MMC core:
- Fix a few memoryleaks
- Minor improvements to the card initialization sequence
- Partially support sleepy GPIO controllers for pwrseq eMMC
MMC host:
- alcor: Work with multiple-entry sglists
- alcor: Enable DMA for writes
- meson-gx: Improve tuning support
- meson-gx: Avoid clock glitch when switching to DDR modes
- meson-gx: Disable unreliable HS400 mode
- mmci: Minor updates for support of HW busy detection
- mmci: Support data transfers for the stm32_sdmmc variant
- mmci: Restructure code to better support different variants
- mtk-sd: Add support for version found on MT7620 family SOCs
- mtk-sd: Add support for the MT8516 version
- mtk-sd: Add Chaotian Jing as the maintainer
- sdhci: Reorganize request-code to convert from tasklet to workqueue
- sdhci_am654: Stabilize support for lower speed modes
- sdhci-esdhc-imx: Add HS400 support for iMX7ULP
- sdhci-esdhc-imx: Add support for iMX7ULP version
- sdhci-of-arasan: Allow to disable DCMDs via DT for CQE
- sdhci-of-esdhc: Add support for the ls1028a version
- sdhci-of-esdhc: Several fixups for errata
- sdhci-pci: Fix BYT OCP setting
- sdhci-pci: Add support for Intel CML
- sdhci-tegra: Add support for system suspend/resume
- sdhci-tegra: Add CQE support for Tegra186 WAR
- sdhci-tegra: Add support for Tegra194
- sdhci-tegra: Update HW tuning process
MEMSTICK:
- I volunteered to help as a maintainer for the memstick subsystem, which is
reflected by an update to the MAINTAINERS file. Changes are funneled through
my MMC git and we will use the linux-mmc mailing list.
MEMSTICK host:
- A few minor cleanups
----------------------------------------------------------------
Adrian Hunter (7):
mmc: sdhci-pci: Add support for Intel CML
mmc: sdhci: Reorganize sdhci_finish_mrq() and __sdhci_finish_mrq()
mmc: sdhci: Move timer and has_requests functions
mmc: sdhci: Move some processing to __sdhci_finish_mrq()
mmc: sdhci: Call mmc_request_done() from IRQ handler if possible
mmc: sdhci: Remove finish_tasklet
mmc: sdhci-pci: Fix BYT OCP setting
Andrea Merello (1):
mmc: core: make pwrseq_emmc (partially) support sleepy GPIO controllers
Andy Shevchenko (5):
mmc: mmc_spi: Remove redundant dev_set_drvdata()
mmc: mmc_spi: Remove useless NULL check at ->remove()
mmc: mmc_spi: Join string literals back
mmc: mmc_spi: Indentation fixes
mmc: mmc_spi: Convert to use SPDX identifier
BOUGH CHEN (3):
dt-bindings: mmc: fsl-imx-esdhc: add imx7ulp compatible string
mmc: sdhci-esdhc-imx: add pm_qos to interact with cpuidle
mmc: sdhci-esdhc-imx: Add HS400 support for iMX7ULP
Christoph Muellner (2):
dt-bindings: mmc: Add disable-cqe-dcmd property.
mmc: sdhci-of-arasan: Add DTS property to disable DCMDs.
Daniel Drake (4):
mmc: alcor: enable DMA for writes
mmc: alcor: enable DMA transfer of large buffers
Revert "mmc: alcor: enable DMA transfer of large buffers"
mmc: alcor: work with multiple-entry sglists
Enrico Weigelt, metux IT consult (1):
mmc: host: Pedantic cleanups to Kconfig
Fabien Parent (3):
mmc: mtk-sd: add support for MT8516
mmc: mtk-sd: check for valid optional memory resource
dt-bindings: mmc: Add support for MT8516 to mtk-sd
Faiz Abbas (1):
mmc: sdhci_am654: Clear HISPD_ENA in some lower speed modes
Gustavo A. R. Silva (1):
mmc: usdhi6rol0: mark expected switch fall-throughs
Jerome Brunet (7):
mmc: meson-gx: remove open coded read with timeout
mmc: meson-gx: ack only raised irq
mmc: meson-gx: correct irq flag
mmc: meson-gx: disable HS400
mmc: meson-gx: avoid clock glitch when switching to DDR modes
mmc: meson-gx: remove Rx phase tuning
mmc: meson-gx: add signal resampling tuning
Kamlesh Gurudasani (1):
mmc: alcor: Drop pointer to mmc_host from alcor_sdmmc_host
Kangjie Lu (1):
mmc_spi: add a status check for spi_sync_locked
Kefeng Wang (1):
mmc: omap_hsmmc: Use dev_get_drvdata()
Ludovic Barre (7):
mmc: mmci: add get_datactrl_cfg callback and helper functions
mmc: mmci: define get_dctrl_cfg for legacy variant
mmc: mmci: qcom: define get_dctrl_cfg
mmc: mmci: stm32: define get_dctrl_cfg
mmc: mmci: replace blksz_datactrlXX by get_datactrl_cfg callback
mmc: mmci: Cleanup mmci_cmd_irq() for busy detect
mmc: mmci: Prevent polling for busy detection in IRQ context
NeilBrown (4):
mmc: mtk-sd: don't hard-code interrupt trigger type
mmc: mtk-sd: add support for config found in mt7620 family SOCs.
mmc: mtk-sd: enable internal card-detect logic.
mmc: mtk-sd: select REGULATOR
Pan Bian (1):
mmc: core: fix possible use after free of host
Pavel Machek (1):
mmc: core: Fix warning and undefined behavior in mmc voltage handling
Raul E Rangel (2):
mmc: core: Verify SD bus width
mmc: core: Fix tag set memory leak
Sowjanya Komatineni (9):
mmc: tegra: fix ddr signaling for non-ddr modes
mmc: sdhci: allow host to specify maximum tuning loops
mmc: tegra: update hw tuning process
dt-bindings: mmc: tegra: document Tegra194 compatible string
mmc: cqhci: allow hosts to update dcmd cmd desc
mmc: tegra: add Tegra186 WAR for CQE
mmc: cqhci: add CQHCI_SSC1 register CBC field mask
mmc: tegra: fix CQE enable and resume sequence
mmc: tegra: add sdhci tegra suspend and resume
Stefan Wahren (1):
mmc: mxs-mmc: Enable MMC_CAP_ERASE
Ulf Hansson (9):
mmc: mmci: Don't share un-implemented DMA functions
mmc: mmci: Drop unnecessary clear of variant->qcom_dml flag
mmc: mmci: Re-work code starting DMA for the qcom variant
mmc: mmci: Drop qcom specific header file
mmc: mmci: Share sdmmc_variant_init() via the common header file
mmc: mmci: Make mmci_variant_init() static
MAINTAINERS: Collect TI FLASH MEDIA drivers into one section
MAINTAINERS: Add Ulf Hansson to the MEMORYSTICK section
MAINTAINERS: Add section for MediaTek MMC/SD/SDIO driver
Wolfram Sang (4):
mmc: renesas_sdhi: update copyright information
mmc: tmio: introduce macro for max block size
mmc: renesas_sdhi: prevent overflow for max_req_size
mmc: renesas_sdhi: set CBSY flag before probing TMIO host
Yangbo Lu (1):
mmc: sdhci-of-esdhc: add quirk to ignore command inhibit for data
Yinbo Zhu (6):
mmc: sdhci-of-esdhc: add erratum A011334 support in lx2160 2.0 SoC
mmc: sdhci-of-esdhc: add erratum eSDHC5 support
mmc: sdhci-of-esdhc: add erratum eSDHC-A001 and A-008358 support
mmc: sdhci-of-esdhc: add erratum A-009204 support
mmc: sdhci-of-esdhc: add erratum eSDHC7 support
dt-bindings: mmc: add DT bindings for ls1028a eSDHC host controller
Yoshihiro Shimoda (1):
mmc: core: retry CMD1 in mmc_send_op_cond() even if the ocr = 0
YueHaibing (3):
mmc: sdhci-omap: Make sdhci_omap_reset static
memstick: jmb38x_ms: remove set but not used variable 'data'
memstick: tifm: remove set but not used variable 'data'
.../devicetree/bindings/mmc/fsl-esdhc.txt | 1 +
.../devicetree/bindings/mmc/fsl-imx-esdhc.txt | 1 +
Documentation/devicetree/bindings/mmc/mmc.txt | 2 +
Documentation/devicetree/bindings/mmc/mtk-sd.txt | 2 +
.../bindings/mmc/nvidia,tegra20-sdhci.txt | 1 +
MAINTAINERS | 25 +-
drivers/memstick/host/jmb38x_ms.c | 3 -
drivers/memstick/host/tifm_ms.c | 3 -
drivers/mmc/core/host.c | 4 +-
drivers/mmc/core/mmc_ops.c | 16 +-
drivers/mmc/core/pwrseq_emmc.c | 38 +-
drivers/mmc/core/queue.c | 1 +
drivers/mmc/core/sd.c | 8 +
drivers/mmc/host/Kconfig | 46 +--
drivers/mmc/host/alcor.c | 72 ++--
drivers/mmc/host/cqhci.c | 2 +
drivers/mmc/host/cqhci.h | 4 +
drivers/mmc/host/meson-gx-mmc.c | 419 ++++++---------------
drivers/mmc/host/mmc_spi.c | 98 ++---
drivers/mmc/host/mmci.c | 82 ++--
drivers/mmc/host/mmci.h | 32 +-
drivers/mmc/host/mmci_qcom_dml.c | 17 +-
drivers/mmc/host/mmci_qcom_dml.h | 30 --
drivers/mmc/host/mmci_stm32_sdmmc.c | 18 +
drivers/mmc/host/mtk-sd.c | 97 ++++-
drivers/mmc/host/mxs-mmc.c | 3 +-
drivers/mmc/host/of_mmc_spi.c | 6 +-
drivers/mmc/host/omap_hsmmc.c | 4 +-
drivers/mmc/host/renesas_sdhi.h | 2 +-
drivers/mmc/host/renesas_sdhi_core.c | 12 +-
drivers/mmc/host/renesas_sdhi_internal_dmac.c | 11 +-
drivers/mmc/host/renesas_sdhi_sys_dmac.c | 6 +-
drivers/mmc/host/sdhci-esdhc-imx.c | 41 +-
drivers/mmc/host/sdhci-of-arasan.c | 5 +-
drivers/mmc/host/sdhci-of-esdhc.c | 47 +++
drivers/mmc/host/sdhci-omap.c | 2 +-
drivers/mmc/host/sdhci-pci-core.c | 98 +++++
drivers/mmc/host/sdhci-pci.h | 2 +
drivers/mmc/host/sdhci-tegra.c | 362 +++++++++++++++++-
drivers/mmc/host/sdhci.c | 164 +++++---
drivers/mmc/host/sdhci.h | 4 +-
drivers/mmc/host/sdhci_am654.c | 22 ++
drivers/mmc/host/tmio_mmc.h | 6 +-
drivers/mmc/host/tmio_mmc_core.c | 6 +-
drivers/mmc/host/usdhi6rol0.c | 9 +-
include/linux/alcor_pci.h | 2 +-
46 files changed, 1170 insertions(+), 666 deletions(-)
delete mode 100644 drivers/mmc/host/mmci_qcom_dml.h
next reply other threads:[~2019-05-07 6:36 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-05-07 6:36 Ulf Hansson [this message]
2019-05-07 20:00 ` [GIT PULL] MMC and MEMSTICK updates for v5.2 Linus Torvalds
2019-05-07 20:50 ` pr-tracker-bot
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190507063634.8389-1-ulf.hansson@linaro.org \
--to=ulf.hansson@linaro.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mmc@vger.kernel.org \
--cc=torvalds@linux-foundation.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).