linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: David Hildenbrand <david@redhat.com>
To: linux-mm@kvack.org
Cc: linux-kernel@vger.kernel.org, linux-ia64@vger.kernel.org,
	linuxppc-dev@lists.ozlabs.org, linux-s390@vger.kernel.org,
	linux-sh@vger.kernel.org, akpm@linux-foundation.org,
	Dan Williams <dan.j.williams@intel.com>,
	David Hildenbrand <david@redhat.com>,
	Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
	"Rafael J. Wysocki" <rafael@kernel.org>,
	"mike.travis@hpe.com" <mike.travis@hpe.com>,
	Ingo Molnar <mingo@kernel.org>,
	Andrew Banman <andrew.banman@hpe.com>,
	Oscar Salvador <osalvador@suse.de>,
	Michal Hocko <mhocko@suse.com>,
	Pavel Tatashin <pasha.tatashin@soleen.com>, Qian Cai <cai@lca.pw>,
	Wei Yang <richard.weiyang@gmail.com>,
	Arun KS <arunks@codeaurora.org>,
	Mathieu Malaterre <malat@debian.org>
Subject: [PATCH v2 4/8] mm/memory_hotplug: Create memory block devices after arch_add_memory()
Date: Tue,  7 May 2019 20:38:00 +0200	[thread overview]
Message-ID: <20190507183804.5512-5-david@redhat.com> (raw)
In-Reply-To: <20190507183804.5512-1-david@redhat.com>

Only memory to be added to the buddy and to be onlined/offlined by
user space using memory block devices needs (and should have!) memory
block devices.

Factor out creation of memory block devices Create all devices after
arch_add_memory() succeeded. We can later drop the want_memblock parameter,
because it is now effectively stale.

Only after memory block devices have been added, memory can be onlined
by user space. This implies, that memory is not visible to user space at
all before arch_add_memory() succeeded.

Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: "Rafael J. Wysocki" <rafael@kernel.org>
Cc: David Hildenbrand <david@redhat.com>
Cc: "mike.travis@hpe.com" <mike.travis@hpe.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Andrew Banman <andrew.banman@hpe.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Pavel Tatashin <pasha.tatashin@soleen.com>
Cc: Qian Cai <cai@lca.pw>
Cc: Wei Yang <richard.weiyang@gmail.com>
Cc: Arun KS <arunks@codeaurora.org>
Cc: Mathieu Malaterre <malat@debian.org>
Signed-off-by: David Hildenbrand <david@redhat.com>
---
 drivers/base/memory.c  | 70 ++++++++++++++++++++++++++----------------
 include/linux/memory.h |  2 +-
 mm/memory_hotplug.c    | 15 ++++-----
 3 files changed, 53 insertions(+), 34 deletions(-)

diff --git a/drivers/base/memory.c b/drivers/base/memory.c
index 6e0cb4fda179..862c202a18ca 100644
--- a/drivers/base/memory.c
+++ b/drivers/base/memory.c
@@ -701,44 +701,62 @@ static int add_memory_block(int base_section_nr)
 	return 0;
 }
 
+static void unregister_memory(struct memory_block *memory)
+{
+	BUG_ON(memory->dev.bus != &memory_subsys);
+
+	/* drop the ref. we got via find_memory_block() */
+	put_device(&memory->dev);
+	device_unregister(&memory->dev);
+}
+
 /*
- * need an interface for the VM to add new memory regions,
- * but without onlining it.
+ * Create memory block devices for the given memory area. Start and size
+ * have to be aligned to memory block granularity. Memory block devices
+ * will be initialized as offline.
  */
-int hotplug_memory_register(int nid, struct mem_section *section)
+int hotplug_memory_register(unsigned long start, unsigned long size)
 {
-	int ret = 0;
+	unsigned long block_nr_pages = memory_block_size_bytes() >> PAGE_SHIFT;
+	unsigned long start_pfn = PFN_DOWN(start);
+	unsigned long end_pfn = start_pfn + (size >> PAGE_SHIFT);
+	unsigned long pfn;
 	struct memory_block *mem;
+	int ret = 0;
 
-	mutex_lock(&mem_sysfs_mutex);
+	BUG_ON(!IS_ALIGNED(start, memory_block_size_bytes()));
+	BUG_ON(!IS_ALIGNED(size, memory_block_size_bytes()));
 
-	mem = find_memory_block(section);
-	if (mem) {
-		mem->section_count++;
-		put_device(&mem->dev);
-	} else {
-		ret = init_memory_block(&mem, section, MEM_OFFLINE);
+	mutex_lock(&mem_sysfs_mutex);
+	for (pfn = start_pfn; pfn != end_pfn; pfn += block_nr_pages) {
+		mem = find_memory_block(__pfn_to_section(pfn));
+		if (mem) {
+			WARN_ON_ONCE(false);
+			put_device(&mem->dev);
+			continue;
+		}
+		ret = init_memory_block(&mem, __pfn_to_section(pfn),
+					MEM_OFFLINE);
 		if (ret)
-			goto out;
-		mem->section_count++;
+			break;
+		mem->section_count = memory_block_size_bytes() /
+				     MIN_MEMORY_BLOCK_SIZE;
+	}
+	if (ret) {
+		end_pfn = pfn;
+		for (pfn = start_pfn; pfn != end_pfn; pfn += block_nr_pages) {
+			mem = find_memory_block(__pfn_to_section(pfn));
+			if (!mem)
+				continue;
+			mem->section_count = 0;
+			unregister_memory(mem);
+		}
 	}
-
-out:
 	mutex_unlock(&mem_sysfs_mutex);
 	return ret;
 }
 
-static void
-unregister_memory(struct memory_block *memory)
-{
-	BUG_ON(memory->dev.bus != &memory_subsys);
-
-	/* drop the ref. we got via find_memory_block() */
-	put_device(&memory->dev);
-	device_unregister(&memory->dev);
-}
-
-void unregister_memory_section(struct mem_section *section)
+static int remove_memory_section(struct mem_section *section)
 {
 	struct memory_block *mem;
 
diff --git a/include/linux/memory.h b/include/linux/memory.h
index 474c7c60c8f2..95505fbb5f85 100644
--- a/include/linux/memory.h
+++ b/include/linux/memory.h
@@ -111,7 +111,7 @@ extern int register_memory_notifier(struct notifier_block *nb);
 extern void unregister_memory_notifier(struct notifier_block *nb);
 extern int register_memory_isolate_notifier(struct notifier_block *nb);
 extern void unregister_memory_isolate_notifier(struct notifier_block *nb);
-int hotplug_memory_register(int nid, struct mem_section *section);
+int hotplug_memory_register(unsigned long start, unsigned long size);
 extern void unregister_memory_section(struct mem_section *);
 extern int memory_dev_init(void);
 extern int memory_notify(unsigned long val, void *v);
diff --git a/mm/memory_hotplug.c b/mm/memory_hotplug.c
index 7b5439839d67..e1637c8a0723 100644
--- a/mm/memory_hotplug.c
+++ b/mm/memory_hotplug.c
@@ -258,13 +258,7 @@ static int __meminit __add_section(int nid, unsigned long phys_start_pfn,
 		return -EEXIST;
 
 	ret = sparse_add_one_section(nid, phys_start_pfn, altmap);
-	if (ret < 0)
-		return ret;
-
-	if (!want_memblock)
-		return 0;
-
-	return hotplug_memory_register(nid, __pfn_to_section(phys_start_pfn));
+	return ret < 0 ? ret : 0;
 }
 
 /*
@@ -1106,6 +1100,13 @@ int __ref add_memory_resource(int nid, struct resource *res)
 	if (ret < 0)
 		goto error;
 
+	/* create memory block devices after memory was added */
+	ret = hotplug_memory_register(start, size);
+	if (ret) {
+		arch_remove_memory(nid, start, size, NULL);
+		goto error;
+	}
+
 	if (new_node) {
 		/* If sysfs file of new node can't be created, cpu on the node
 		 * can't be hot-added. There is no rollback way now.
-- 
2.20.1


  parent reply	other threads:[~2019-05-07 18:38 UTC|newest]

Thread overview: 35+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
     [not found] <20190507183804.5512-1-david@redhat.com>
2019-05-07 18:37 ` [PATCH v2 1/8] mm/memory_hotplug: Simplify and fix check_hotplug_memory_range() David Hildenbrand
2019-05-07 20:38   ` Dan Williams
2019-05-09 12:23   ` Wei Yang
2019-05-07 18:37 ` [PATCH v2 2/8] s390x/mm: Implement arch_remove_memory() David Hildenbrand
2019-05-07 20:46   ` Dan Williams
2019-05-07 20:47     ` David Hildenbrand
2019-05-07 20:57       ` Dan Williams
2019-05-07 21:13         ` David Hildenbrand
2019-05-07 18:38 ` David Hildenbrand [this message]
2019-05-07 21:17   ` [PATCH v2 4/8] mm/memory_hotplug: Create memory block devices after arch_add_memory() Dan Williams
2019-05-07 21:27     ` David Hildenbrand
2019-05-08  8:35   ` David Hildenbrand
2019-05-09 12:43   ` Wei Yang
2019-05-09 12:50     ` David Hildenbrand
2019-05-09 13:55   ` Wei Yang
2019-05-09 14:05     ` David Hildenbrand
2019-05-09 14:31   ` Wei Yang
2019-05-09 14:58     ` David Hildenbrand
2019-05-09 21:50       ` Wei Yang
2019-05-09 22:18         ` David Hildenbrand
2019-05-07 18:38 ` [PATCH v2 5/8] mm/memory_hotplug: Drop MHP_MEMBLOCK_API David Hildenbrand
2019-05-07 21:19   ` Dan Williams
2019-05-07 21:24     ` David Hildenbrand
2019-05-07 21:25       ` Dan Williams
2019-05-08  7:39         ` David Hildenbrand
2019-05-08 23:08           ` osalvador
2019-05-09  7:05             ` David Hildenbrand
2019-05-07 18:38 ` [PATCH v2 6/8] mm/memory_hotplug: Remove memory block devices before arch_remove_memory() David Hildenbrand
2019-05-07 21:27   ` Dan Williams
2019-05-07 18:38 ` [PATCH v2 7/8] mm/memory_hotplug: Make unregister_memory_block_under_nodes() never fail David Hildenbrand
2019-05-08  0:15   ` Dan Williams
2019-05-08  7:21     ` David Hildenbrand
2019-05-08 13:50       ` Dan Williams
2019-05-07 18:38 ` [PATCH v2 8/8] mm/memory_hotplug: Remove "zone" parameter from sparse_remove_one_section David Hildenbrand
2019-05-08  0:30   ` Dan Williams

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20190507183804.5512-5-david@redhat.com \
    --to=david@redhat.com \
    --cc=akpm@linux-foundation.org \
    --cc=andrew.banman@hpe.com \
    --cc=arunks@codeaurora.org \
    --cc=cai@lca.pw \
    --cc=dan.j.williams@intel.com \
    --cc=gregkh@linuxfoundation.org \
    --cc=linux-ia64@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mm@kvack.org \
    --cc=linux-s390@vger.kernel.org \
    --cc=linux-sh@vger.kernel.org \
    --cc=linuxppc-dev@lists.ozlabs.org \
    --cc=malat@debian.org \
    --cc=mhocko@suse.com \
    --cc=mike.travis@hpe.com \
    --cc=mingo@kernel.org \
    --cc=osalvador@suse.de \
    --cc=pasha.tatashin@soleen.com \
    --cc=rafael@kernel.org \
    --cc=richard.weiyang@gmail.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).