From: Bjorn Helgaas <helgaas@kernel.org>
To: Frederick Lawler <fred@fredlawl.com>
Cc: Mika Westerberg <mika.westerberg@linux.intel.com>,
Lukas Wunner <lukas@wunner.de>,
Andy Shevchenko <andriy.shevchenko@linux.intel.com>,
Keith Busch <keith.busch@intel.com>,
Dongdong Liu <liudongdong3@huawei.com>,
Sven Van Asbroeck <thesven73@gmail.com>,
linux-pci@vger.kernel.org, linux-kernel@vger.kernel.org,
Bjorn Helgaas <bhelgaas@google.com>
Subject: [PATCH 03/10] PCI/DPC: Log messages with pci_dev, not pcie_device
Date: Thu, 9 May 2019 09:14:49 -0500 [thread overview]
Message-ID: <20190509141456.223614-4-helgaas@kernel.org> (raw)
In-Reply-To: <20190509141456.223614-1-helgaas@kernel.org>
From: Frederick Lawler <fred@fredlawl.com>
Log messages with pci_dev, not pcie_device. Factor out common message
prefixes with dev_fmt().
Example output change:
- dpc 0000:00:01.1:pcie008: DPC error containment capabilities...
+ pcieport 0000:00:01.1: DPC: error containment capabilities...
Link: https://lore.kernel.org/lkml/20190503035946.23608-3-fred@fredlawl.com
Signed-off-by: Frederick Lawler <fred@fredlawl.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
---
drivers/pci/pcie/dpc.c | 37 ++++++++++++++++++-------------------
1 file changed, 18 insertions(+), 19 deletions(-)
diff --git a/drivers/pci/pcie/dpc.c b/drivers/pci/pcie/dpc.c
index 7b77754a82de..a32ec3487a8d 100644
--- a/drivers/pci/pcie/dpc.c
+++ b/drivers/pci/pcie/dpc.c
@@ -6,6 +6,8 @@
* Copyright (C) 2016 Intel Corp.
*/
+#define dev_fmt(fmt) "DPC: " fmt
+
#include <linux/aer.h>
#include <linux/delay.h>
#include <linux/interrupt.h>
@@ -100,7 +102,6 @@ static int dpc_wait_rp_inactive(struct dpc_dev *dpc)
{
unsigned long timeout = jiffies + HZ;
struct pci_dev *pdev = dpc->dev->port;
- struct device *dev = &dpc->dev->device;
u16 cap = dpc->cap_pos, status;
pci_read_config_word(pdev, cap + PCI_EXP_DPC_STATUS, &status);
@@ -110,7 +111,7 @@ static int dpc_wait_rp_inactive(struct dpc_dev *dpc)
pci_read_config_word(pdev, cap + PCI_EXP_DPC_STATUS, &status);
}
if (status & PCI_EXP_DPC_RP_BUSY) {
- dev_warn(dev, "DPC root port still busy\n");
+ pci_warn(pdev, "root port still busy\n");
return -EBUSY;
}
return 0;
@@ -148,7 +149,6 @@ static pci_ers_result_t dpc_reset_link(struct pci_dev *pdev)
static void dpc_process_rp_pio_error(struct dpc_dev *dpc)
{
- struct device *dev = &dpc->dev->device;
struct pci_dev *pdev = dpc->dev->port;
u16 cap = dpc->cap_pos, dpc_status, first_error;
u32 status, mask, sev, syserr, exc, dw0, dw1, dw2, dw3, log, prefix;
@@ -156,13 +156,13 @@ static void dpc_process_rp_pio_error(struct dpc_dev *dpc)
pci_read_config_dword(pdev, cap + PCI_EXP_DPC_RP_PIO_STATUS, &status);
pci_read_config_dword(pdev, cap + PCI_EXP_DPC_RP_PIO_MASK, &mask);
- dev_err(dev, "rp_pio_status: %#010x, rp_pio_mask: %#010x\n",
+ pci_err(pdev, "rp_pio_status: %#010x, rp_pio_mask: %#010x\n",
status, mask);
pci_read_config_dword(pdev, cap + PCI_EXP_DPC_RP_PIO_SEVERITY, &sev);
pci_read_config_dword(pdev, cap + PCI_EXP_DPC_RP_PIO_SYSERROR, &syserr);
pci_read_config_dword(pdev, cap + PCI_EXP_DPC_RP_PIO_EXCEPTION, &exc);
- dev_err(dev, "RP PIO severity=%#010x, syserror=%#010x, exception=%#010x\n",
+ pci_err(pdev, "RP PIO severity=%#010x, syserror=%#010x, exception=%#010x\n",
sev, syserr, exc);
/* Get First Error Pointer */
@@ -171,7 +171,7 @@ static void dpc_process_rp_pio_error(struct dpc_dev *dpc)
for (i = 0; i < ARRAY_SIZE(rp_pio_error_string); i++) {
if ((status & ~mask) & (1 << i))
- dev_err(dev, "[%2d] %s%s\n", i, rp_pio_error_string[i],
+ pci_err(pdev, "[%2d] %s%s\n", i, rp_pio_error_string[i],
first_error == i ? " (First)" : "");
}
@@ -185,18 +185,18 @@ static void dpc_process_rp_pio_error(struct dpc_dev *dpc)
&dw2);
pci_read_config_dword(pdev, cap + PCI_EXP_DPC_RP_PIO_HEADER_LOG + 12,
&dw3);
- dev_err(dev, "TLP Header: %#010x %#010x %#010x %#010x\n",
+ pci_err(pdev, "TLP Header: %#010x %#010x %#010x %#010x\n",
dw0, dw1, dw2, dw3);
if (dpc->rp_log_size < 5)
goto clear_status;
pci_read_config_dword(pdev, cap + PCI_EXP_DPC_RP_PIO_IMPSPEC_LOG, &log);
- dev_err(dev, "RP PIO ImpSpec Log %#010x\n", log);
+ pci_err(pdev, "RP PIO ImpSpec Log %#010x\n", log);
for (i = 0; i < dpc->rp_log_size - 5; i++) {
pci_read_config_dword(pdev,
cap + PCI_EXP_DPC_RP_PIO_TLPPREFIX_LOG, &prefix);
- dev_err(dev, "TLP Prefix Header: dw%d, %#010x\n", i, prefix);
+ pci_err(pdev, "TLP Prefix Header: dw%d, %#010x\n", i, prefix);
}
clear_status:
pci_write_config_dword(pdev, cap + PCI_EXP_DPC_RP_PIO_STATUS, status);
@@ -229,18 +229,17 @@ static irqreturn_t dpc_handler(int irq, void *context)
struct aer_err_info info;
struct dpc_dev *dpc = context;
struct pci_dev *pdev = dpc->dev->port;
- struct device *dev = &dpc->dev->device;
u16 cap = dpc->cap_pos, status, source, reason, ext_reason;
pci_read_config_word(pdev, cap + PCI_EXP_DPC_STATUS, &status);
pci_read_config_word(pdev, cap + PCI_EXP_DPC_SOURCE_ID, &source);
- dev_info(dev, "DPC containment event, status:%#06x source:%#06x\n",
+ pci_info(pdev, "containment event, status:%#06x source:%#06x\n",
status, source);
reason = (status & PCI_EXP_DPC_STATUS_TRIGGER_RSN) >> 1;
ext_reason = (status & PCI_EXP_DPC_STATUS_TRIGGER_RSN_EXT) >> 5;
- dev_warn(dev, "DPC %s detected\n",
+ pci_warn(pdev, "%s detected\n",
(reason == 0) ? "unmasked uncorrectable error" :
(reason == 1) ? "ERR_NONFATAL" :
(reason == 2) ? "ERR_FATAL" :
@@ -307,7 +306,7 @@ static int dpc_probe(struct pcie_device *dev)
dpc_handler, IRQF_SHARED,
"pcie-dpc", dpc);
if (status) {
- dev_warn(device, "request IRQ%d failed: %d\n", dev->irq,
+ pci_warn(pdev, "request IRQ%d failed: %d\n", dev->irq,
status);
return status;
}
@@ -319,7 +318,7 @@ static int dpc_probe(struct pcie_device *dev)
if (dpc->rp_extensions) {
dpc->rp_log_size = (cap & PCI_EXP_DPC_RP_PIO_LOG_SIZE) >> 8;
if (dpc->rp_log_size < 4 || dpc->rp_log_size > 9) {
- dev_err(device, "RP PIO log size %u is invalid\n",
+ pci_err(pdev, "RP PIO log size %u is invalid\n",
dpc->rp_log_size);
dpc->rp_log_size = 0;
}
@@ -328,11 +327,11 @@ static int dpc_probe(struct pcie_device *dev)
ctl = (ctl & 0xfff4) | PCI_EXP_DPC_CTL_EN_FATAL | PCI_EXP_DPC_CTL_INT_EN;
pci_write_config_word(pdev, dpc->cap_pos + PCI_EXP_DPC_CTL, ctl);
- dev_info(device, "DPC error containment capabilities: Int Msg #%d, RPExt%c PoisonedTLP%c SwTrigger%c RP PIO Log %d, DL_ActiveErr%c\n",
- cap & PCI_EXP_DPC_IRQ, FLAG(cap, PCI_EXP_DPC_CAP_RP_EXT),
- FLAG(cap, PCI_EXP_DPC_CAP_POISONED_TLP),
- FLAG(cap, PCI_EXP_DPC_CAP_SW_TRIGGER), dpc->rp_log_size,
- FLAG(cap, PCI_EXP_DPC_CAP_DL_ACTIVE));
+ pci_info(pdev, "error containment capabilities: Int Msg #%d, RPExt%c PoisonedTLP%c SwTrigger%c RP PIO Log %d, DL_ActiveErr%c\n",
+ cap & PCI_EXP_DPC_IRQ, FLAG(cap, PCI_EXP_DPC_CAP_RP_EXT),
+ FLAG(cap, PCI_EXP_DPC_CAP_POISONED_TLP),
+ FLAG(cap, PCI_EXP_DPC_CAP_SW_TRIGGER), dpc->rp_log_size,
+ FLAG(cap, PCI_EXP_DPC_CAP_DL_ACTIVE));
pci_add_ext_cap_save_buffer(pdev, PCI_EXT_CAP_ID_DPC, sizeof(u16));
return status;
--
2.21.0.1020.gf2820cf01a-goog
next prev parent reply other threads:[~2019-05-09 14:15 UTC|newest]
Thread overview: 25+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-05-09 14:14 [PATCH v4 00/10] PCI: Log with pci_dev, not pcie_device Bjorn Helgaas
2019-05-09 14:14 ` [PATCH 01/10] PCI/AER: Replace dev_printk(KERN_DEBUG) with dev_info() Bjorn Helgaas
2019-05-09 17:36 ` Andy Shevchenko
2019-05-09 21:08 ` Bjorn Helgaas
2019-05-09 14:14 ` [PATCH 02/10] PCI/PME: " Bjorn Helgaas
2019-05-09 17:35 ` Andy Shevchenko
2019-05-09 18:31 ` Joe Perches
2019-05-09 21:12 ` Bjorn Helgaas
2019-05-10 2:22 ` Joe Perches
2019-05-09 14:14 ` Bjorn Helgaas [this message]
2019-05-09 17:39 ` [PATCH 03/10] PCI/DPC: Log messages with pci_dev, not pcie_device Andy Shevchenko
2019-05-09 21:18 ` Bjorn Helgaas
2019-05-09 14:14 ` [PATCH 04/10] PCI/AER: " Bjorn Helgaas
2019-05-09 17:42 ` Andy Shevchenko
2019-05-09 21:44 ` Bjorn Helgaas
2019-05-09 14:14 ` [PATCH 05/10] PCI: pciehp: Remove pciehp_debug uses Bjorn Helgaas
2019-05-09 14:14 ` [PATCH 06/10] PCI: pciehp: Replace pciehp_debug module param with dyndbg Bjorn Helgaas
2019-05-09 14:14 ` [PATCH 07/10] PCI: pciehp: Log messages with pci_dev, not pcie_device Bjorn Helgaas
2019-05-09 14:14 ` [PATCH 08/10] PCI: pciehp: Remove unused dbg/err/info/warn() wrappers Bjorn Helgaas
2019-05-09 14:14 ` [PATCH 09/10] PCI: pciehp: Remove pointless PCIE_MODULE_NAME definition Bjorn Helgaas
2019-05-09 14:14 ` [PATCH 10/10] PCI: pciehp: Remove pointless MY_NAME definition Bjorn Helgaas
2019-05-09 15:07 ` [PATCH v4 00/10] PCI: Log with pci_dev, not pcie_device Keith Busch
2019-05-09 17:10 ` Bjorn Helgaas
2019-05-09 17:49 ` Andy Shevchenko
2019-05-09 21:49 ` Bjorn Helgaas
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190509141456.223614-4-helgaas@kernel.org \
--to=helgaas@kernel.org \
--cc=andriy.shevchenko@linux.intel.com \
--cc=bhelgaas@google.com \
--cc=fred@fredlawl.com \
--cc=keith.busch@intel.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pci@vger.kernel.org \
--cc=liudongdong3@huawei.com \
--cc=lukas@wunner.de \
--cc=mika.westerberg@linux.intel.com \
--cc=thesven73@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).