From: Bjorn Andersson <bjorn.andersson@linaro.org>
To: Ohad Ben-Cohen <ohad@wizery.com>,
Bjorn Andersson <bjorn.andersson@linaro.org>,
Rob Herring <robh+dt@kernel.org>,
Mark Rutland <mark.rutland@arm.com>
Cc: Andy Gross <agross@kernel.org>,
David Brown <david.brown@linaro.org>,
linux-arm-msm@vger.kernel.org, linux-remoteproc@vger.kernel.org,
devicetree@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: [PATCH v2 1/8] dt-bindings: remoteproc: Rename and amend Hexagon v56 binding
Date: Thu, 9 May 2019 21:34:14 -0700 [thread overview]
Message-ID: <20190510043421.31393-2-bjorn.andersson@linaro.org> (raw)
In-Reply-To: <20190510043421.31393-1-bjorn.andersson@linaro.org>
The SDM845 Audio DSP peripheral image loader binding describes the
properties needed to load and boot firmware on a Hexagon v56. Rename the
file and add the Compute DSP (CDSP) found in QCS404 to the binding.
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
---
...qcom,adsp-pil.txt => qcom,hexagon-v56.txt} | 35 +++++++++++++------
1 file changed, 25 insertions(+), 10 deletions(-)
rename Documentation/devicetree/bindings/remoteproc/{qcom,adsp-pil.txt => qcom,hexagon-v56.txt} (74%)
diff --git a/Documentation/devicetree/bindings/remoteproc/qcom,adsp-pil.txt b/Documentation/devicetree/bindings/remoteproc/qcom,hexagon-v56.txt
similarity index 74%
rename from Documentation/devicetree/bindings/remoteproc/qcom,adsp-pil.txt
rename to Documentation/devicetree/bindings/remoteproc/qcom,hexagon-v56.txt
index 66af2c30944f..1337a3d93d35 100644
--- a/Documentation/devicetree/bindings/remoteproc/qcom,adsp-pil.txt
+++ b/Documentation/devicetree/bindings/remoteproc/qcom,hexagon-v56.txt
@@ -1,12 +1,13 @@
-Qualcomm Technology Inc. ADSP Peripheral Image Loader
+Qualcomm Technology Inc. Hexagon v56 Peripheral Image Loader
This document defines the binding for a component that loads and boots firmware
-on the Qualcomm Technology Inc. ADSP Hexagon core.
+on the Qualcomm Technology Inc. Hexagon v56 core.
- compatible:
Usage: required
Value type: <string>
Definition: must be one of:
+ "qcom,qcs404-cdsp-pil",
"qcom,sdm845-adsp-pil"
- reg:
@@ -28,10 +29,11 @@ on the Qualcomm Technology Inc. ADSP Hexagon core.
- clocks:
Usage: required
Value type: <prop-encoded-array>
- Definition: List of 8 phandle and clock specifier pairs for the adsp.
+ Definition: List of phandles and clock specifier pairs for the Hexagon,
+ per clock-names below.
- clock-names:
- Usage: required
+ Usage: required for SDM845 ADSP
Value type: <stringlist>
Definition: List of clock input name strings sorted in the same
order as the clocks property. Definition must have
@@ -39,6 +41,14 @@ on the Qualcomm Technology Inc. ADSP Hexagon core.
"lpass_ahbm_aon_cbcr", "qdsp6ss_xo", "qdsp6ss_sleep"
and "qdsp6ss_core".
+- clock-names:
+ Usage: required for QCS404 CDSP
+ Value type: <stringlist>
+ Definition: List of clock input name strings sorted in the same
+ order as the clocks property. Definition must have
+ "xo", "sway", "tbu", "bimc", "ahb_aon", "q6ss_slave",
+ "q6ss_master", "q6_axim".
+
- power-domains:
Usage: required
Value type: <phandle>
@@ -47,28 +57,33 @@ on the Qualcomm Technology Inc. ADSP Hexagon core.
- resets:
Usage: required
Value type: <phandle>
- Definition: reference to the list of 2 reset-controller for the adsp.
+ Definition: reference to the list of resets for the Hexagon.
- reset-names:
- Usage: required
+ Usage: required for SDM845 ADSP
Value type: <stringlist>
Definition: must be "pdc_sync" and "cc_lpass"
+- reset-names:
+ Usage: required for QCS404 CDSP
+ Value type: <stringlist>
+ Definition: must be "restart"
+
- qcom,halt-regs:
Usage: required
Value type: <prop-encoded-array>
Definition: a phandle reference to a syscon representing TCSR followed
- by the offset within syscon for lpass halt register.
+ by the offset within syscon for Hexagon halt register.
- memory-region:
Usage: required
Value type: <phandle>
- Definition: reference to the reserved-memory for the ADSP
+ Definition: reference to the reserved-memory for the firmware
- qcom,smem-states:
Usage: required
Value type: <phandle>
- Definition: reference to the smem state for requesting the ADSP to
+ Definition: reference to the smem state for requesting the Hexagon to
shut down
- qcom,smem-state-names:
@@ -79,7 +94,7 @@ on the Qualcomm Technology Inc. ADSP Hexagon core.
= SUBNODES
The adsp node may have an subnode named "glink-edge" that describes the
-communication edge, channels and devices related to the ADSP.
+communication edge, channels and devices related to the Hexagon.
See ../soc/qcom/qcom,glink.txt for details on how to describe these.
= EXAMPLE
--
2.18.0
next prev parent reply other threads:[~2019-05-10 4:34 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-05-10 4:34 [PATCH v2 0/8] Qualcomm QCS404 CDSP improvements and fastrpc Bjorn Andersson
2019-05-10 4:34 ` Bjorn Andersson [this message]
2019-05-13 15:23 ` [PATCH v2 1/8] dt-bindings: remoteproc: Rename and amend Hexagon v56 binding Rob Herring
2019-05-10 4:34 ` [PATCH v2 2/8] remoteproc: qcom: qdsp6-adsp: Add support for QCS404 CDSP Bjorn Andersson
2019-05-10 4:34 ` [PATCH v2 3/8] arm64: dts: qcom: qcs404-evb: Mark CDSP clocks protected Bjorn Andersson
2019-05-10 4:34 ` [PATCH v2 4/8] arm64: dts: qcom: qcs404: Add TCSR node Bjorn Andersson
2019-05-10 4:34 ` [PATCH v2 5/8] arm64: dts: qcom: qcs404: Fully describe the CDSP Bjorn Andersson
2019-05-10 4:34 ` [PATCH v2 6/8] arm64: dts: qcom: qcs404: Move lpass and q6 into soc Bjorn Andersson
2019-05-10 4:34 ` [PATCH v2 7/8] arm64: dts: qcom: qcs404: Define APPS IOMMU Bjorn Andersson
2019-05-13 4:54 ` Vinod Koul
2019-05-13 18:28 ` Bjorn Andersson
2019-05-10 4:34 ` [PATCH v2 8/8] arm64: dts: qcom: qcs404: Add fastrpc nodes Bjorn Andersson
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190510043421.31393-2-bjorn.andersson@linaro.org \
--to=bjorn.andersson@linaro.org \
--cc=agross@kernel.org \
--cc=david.brown@linaro.org \
--cc=devicetree@vger.kernel.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-remoteproc@vger.kernel.org \
--cc=mark.rutland@arm.com \
--cc=ohad@wizery.com \
--cc=robh+dt@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).