From: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
To: p.zabel@pengutronix.de, robh+dt@kernel.org
Cc: linux-kernel@vger.kernel.org, devicetree@vger.kernel.org,
haitao.suo@bitmain.com, darren.tsao@bitmain.com,
alec.lin@bitmain.com,
Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Subject: [PATCH v3 1/4] dt-bindings: reset: Add devicetree binding for BM1880 reset controller
Date: Sat, 11 May 2019 00:15:22 +0530 [thread overview]
Message-ID: <20190510184525.13568-2-manivannan.sadhasivam@linaro.org> (raw)
In-Reply-To: <20190510184525.13568-1-manivannan.sadhasivam@linaro.org>
Add devicetree binding for Bitmain BM1880 SoC reset controller.
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Rob Herring <robh@kernel.org>
---
.../bindings/reset/bitmain,bm1880-reset.txt | 18 +++++++
.../dt-bindings/reset/bitmain,bm1880-reset.h | 51 +++++++++++++++++++
2 files changed, 69 insertions(+)
create mode 100644 Documentation/devicetree/bindings/reset/bitmain,bm1880-reset.txt
create mode 100644 include/dt-bindings/reset/bitmain,bm1880-reset.h
diff --git a/Documentation/devicetree/bindings/reset/bitmain,bm1880-reset.txt b/Documentation/devicetree/bindings/reset/bitmain,bm1880-reset.txt
new file mode 100644
index 000000000000..a6f8455ae6c4
--- /dev/null
+++ b/Documentation/devicetree/bindings/reset/bitmain,bm1880-reset.txt
@@ -0,0 +1,18 @@
+Bitmain BM1880 SoC Reset Controller
+===================================
+
+Please also refer to reset.txt in this directory for common reset
+controller binding usage.
+
+Required properties:
+- compatible: Should be "bitmain,bm1880-reset"
+- reg: Offset and length of reset controller space in SCTRL.
+- #reset-cells: Must be 1.
+
+Example:
+
+ rst: reset-controller@c00 {
+ compatible = "bitmain,bm1880-reset";
+ reg = <0xc00 0x8>;
+ #reset-cells = <1>;
+ };
diff --git a/include/dt-bindings/reset/bitmain,bm1880-reset.h b/include/dt-bindings/reset/bitmain,bm1880-reset.h
new file mode 100644
index 000000000000..4c0de5223773
--- /dev/null
+++ b/include/dt-bindings/reset/bitmain,bm1880-reset.h
@@ -0,0 +1,51 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright (c) 2018 Bitmain Ltd.
+ * Copyright (c) 2019 Linaro Ltd.
+ */
+
+#ifndef _DT_BINDINGS_BM1880_RESET_H
+#define _DT_BINDINGS_BM1880_RESET_H
+
+#define BM1880_RST_MAIN_AP 0
+#define BM1880_RST_SECOND_AP 1
+#define BM1880_RST_DDR 2
+#define BM1880_RST_VIDEO 3
+#define BM1880_RST_JPEG 4
+#define BM1880_RST_VPP 5
+#define BM1880_RST_GDMA 6
+#define BM1880_RST_AXI_SRAM 7
+#define BM1880_RST_TPU 8
+#define BM1880_RST_USB 9
+#define BM1880_RST_ETH0 10
+#define BM1880_RST_ETH1 11
+#define BM1880_RST_NAND 12
+#define BM1880_RST_EMMC 13
+#define BM1880_RST_SD 14
+#define BM1880_RST_SDMA 15
+#define BM1880_RST_I2S0 16
+#define BM1880_RST_I2S1 17
+#define BM1880_RST_UART0_1_CLK 18
+#define BM1880_RST_UART0_1_ACLK 19
+#define BM1880_RST_UART2_3_CLK 20
+#define BM1880_RST_UART2_3_ACLK 21
+#define BM1880_RST_MINER 22
+#define BM1880_RST_I2C0 23
+#define BM1880_RST_I2C1 24
+#define BM1880_RST_I2C2 25
+#define BM1880_RST_I2C3 26
+#define BM1880_RST_I2C4 27
+#define BM1880_RST_PWM0 28
+#define BM1880_RST_PWM1 29
+#define BM1880_RST_PWM2 30
+#define BM1880_RST_PWM3 31
+#define BM1880_RST_SPI 32
+#define BM1880_RST_GPIO0 33
+#define BM1880_RST_GPIO1 34
+#define BM1880_RST_GPIO2 35
+#define BM1880_RST_EFUSE 36
+#define BM1880_RST_WDT 37
+#define BM1880_RST_AHB_ROM 38
+#define BM1880_RST_SPIC 39
+
+#endif /* _DT_BINDINGS_BM1880_RESET_H */
--
2.17.1
next prev parent reply other threads:[~2019-05-10 18:45 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-05-10 18:45 [PATCH v3 0/4] Add reset controller support for BM1880 SoC Manivannan Sadhasivam
2019-05-10 18:45 ` Manivannan Sadhasivam [this message]
2019-05-10 18:45 ` [PATCH v3 2/4] arm64: dts: bitmain: " Manivannan Sadhasivam
2019-05-10 18:45 ` [PATCH v3 3/4] reset: " Manivannan Sadhasivam
2019-05-10 18:45 ` [PATCH v3 4/4] reset: Switch to SPDX license identifier for reset-simple Manivannan Sadhasivam
2019-05-13 11:06 ` [PATCH v3 0/4] Add reset controller support for BM1880 SoC Philipp Zabel
2019-05-13 14:06 ` Manivannan Sadhasivam
2019-05-13 14:46 ` Philipp Zabel
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190510184525.13568-2-manivannan.sadhasivam@linaro.org \
--to=manivannan.sadhasivam@linaro.org \
--cc=alec.lin@bitmain.com \
--cc=darren.tsao@bitmain.com \
--cc=devicetree@vger.kernel.org \
--cc=haitao.suo@bitmain.com \
--cc=linux-kernel@vger.kernel.org \
--cc=p.zabel@pengutronix.de \
--cc=robh+dt@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).