From: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
To: p.zabel@pengutronix.de, robh+dt@kernel.org
Cc: linux-kernel@vger.kernel.org, devicetree@vger.kernel.org,
haitao.suo@bitmain.com, darren.tsao@bitmain.com,
alec.lin@bitmain.com,
Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Subject: [PATCH v3 2/4] arm64: dts: bitmain: Add reset controller support for BM1880 SoC
Date: Sat, 11 May 2019 00:15:23 +0530 [thread overview]
Message-ID: <20190510184525.13568-3-manivannan.sadhasivam@linaro.org> (raw)
In-Reply-To: <20190510184525.13568-1-manivannan.sadhasivam@linaro.org>
Add reset controller support for Bitmain BM1880 SoC. This commit also
adds reset support to UART peripherals.
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
---
arch/arm64/boot/dts/bitmain/bm1880.dtsi | 11 +++++++++++
1 file changed, 11 insertions(+)
diff --git a/arch/arm64/boot/dts/bitmain/bm1880.dtsi b/arch/arm64/boot/dts/bitmain/bm1880.dtsi
index fdfdc65d29ef..3ab039029bf2 100644
--- a/arch/arm64/boot/dts/bitmain/bm1880.dtsi
+++ b/arch/arm64/boot/dts/bitmain/bm1880.dtsi
@@ -5,6 +5,7 @@
*/
#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/reset/bitmain,bm1880-reset.h>
/ {
compatible = "bitmain,bm1880";
@@ -92,6 +93,12 @@
compatible = "bitmain,bm1880-pinctrl";
reg = <0x50 0x4B0>;
};
+
+ rst: reset-controller@c00 {
+ compatible = "bitmain,bm1880-reset";
+ reg = <0xc00 0x8>;
+ #reset-cells = <1>;
+ };
};
uart0: serial@58018000 {
@@ -100,6 +107,7 @@
interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
reg-shift = <2>;
reg-io-width = <4>;
+ resets = <&rst BM1880_RST_UART0_1_CLK>;
status = "disabled";
};
@@ -109,6 +117,7 @@
interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
reg-shift = <2>;
reg-io-width = <4>;
+ resets = <&rst BM1880_RST_UART0_1_ACLK>;
status = "disabled";
};
@@ -118,6 +127,7 @@
interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
reg-shift = <2>;
reg-io-width = <4>;
+ resets = <&rst BM1880_RST_UART2_3_CLK>;
status = "disabled";
};
@@ -127,6 +137,7 @@
interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>;
reg-shift = <2>;
reg-io-width = <4>;
+ resets = <&rst BM1880_RST_UART2_3_ACLK>;
status = "disabled";
};
};
--
2.17.1
next prev parent reply other threads:[~2019-05-10 18:45 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-05-10 18:45 [PATCH v3 0/4] Add reset controller support for BM1880 SoC Manivannan Sadhasivam
2019-05-10 18:45 ` [PATCH v3 1/4] dt-bindings: reset: Add devicetree binding for BM1880 reset controller Manivannan Sadhasivam
2019-05-10 18:45 ` Manivannan Sadhasivam [this message]
2019-05-10 18:45 ` [PATCH v3 3/4] reset: Add reset controller support for BM1880 SoC Manivannan Sadhasivam
2019-05-10 18:45 ` [PATCH v3 4/4] reset: Switch to SPDX license identifier for reset-simple Manivannan Sadhasivam
2019-05-13 11:06 ` [PATCH v3 0/4] Add reset controller support for BM1880 SoC Philipp Zabel
2019-05-13 14:06 ` Manivannan Sadhasivam
2019-05-13 14:46 ` Philipp Zabel
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190510184525.13568-3-manivannan.sadhasivam@linaro.org \
--to=manivannan.sadhasivam@linaro.org \
--cc=alec.lin@bitmain.com \
--cc=darren.tsao@bitmain.com \
--cc=devicetree@vger.kernel.org \
--cc=haitao.suo@bitmain.com \
--cc=linux-kernel@vger.kernel.org \
--cc=p.zabel@pengutronix.de \
--cc=robh+dt@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).