From: Fabrice Gasnier <fabrice.gasnier@st.com>
To: <wsa@the-dreams.de>, <pierre-yves.mordret@st.com>
Cc: <marc.w.gonzalez@free.fr>, <fabien.dessenne@st.com>,
<mcoquelin.stm32@gmail.com>, <alexandre.torgue@st.com>,
<linux-i2c@vger.kernel.org>,
<linux-stm32@st-md-mailman.stormreply.com>,
<linux-arm-kernel@lists.infradead.org>,
<linux-kernel@vger.kernel.org>
Subject: [PATCH v2] i2c: i2c-stm32f7: fix the get_irq error cases
Date: Thu, 16 May 2019 17:29:54 +0200 [thread overview]
Message-ID: <1558020594-1498-1-git-send-email-fabrice.gasnier@st.com> (raw)
During probe, return the "get_irq" error value instead of -EINVAL which
allows the driver to be deferred probed if needed.
Fix also the case where of_irq_get() returns a negative value.
Note :
On failure of_irq_get() returns 0 or a negative value while
platform_get_irq() returns a negative value.
Fixes: aeb068c57214 ("i2c: i2c-stm32f7: add driver")
Reviewed-by: Pierre-Yves MORDRET <pierre-yves.mordret@st.com>
Signed-off-by: Fabien Dessenne <fabien.dessenne@st.com>
Signed-off-by: Fabrice Gasnier <fabrice.gasnier@st.com>
---
Changes in v2:
- Also check for irq == 0 that means "does not exist" as pointed out by
Marc
---
drivers/i2c/busses/i2c-stm32f7.c | 26 ++++++++++++++------------
1 file changed, 14 insertions(+), 12 deletions(-)
diff --git a/drivers/i2c/busses/i2c-stm32f7.c b/drivers/i2c/busses/i2c-stm32f7.c
index 4284fc9..d7d7dd7 100644
--- a/drivers/i2c/busses/i2c-stm32f7.c
+++ b/drivers/i2c/busses/i2c-stm32f7.c
@@ -25,7 +25,6 @@
#include <linux/module.h>
#include <linux/of.h>
#include <linux/of_address.h>
-#include <linux/of_irq.h>
#include <linux/of_platform.h>
#include <linux/platform_device.h>
#include <linux/pinctrl/consumer.h>
@@ -1812,15 +1811,14 @@ static struct i2c_algorithm stm32f7_i2c_algo = {
static int stm32f7_i2c_probe(struct platform_device *pdev)
{
- struct device_node *np = pdev->dev.of_node;
struct stm32f7_i2c_dev *i2c_dev;
const struct stm32f7_i2c_setup *setup;
struct resource *res;
- u32 irq_error, irq_event, clk_rate, rise_time, fall_time;
+ u32 clk_rate, rise_time, fall_time;
struct i2c_adapter *adap;
struct reset_control *rst;
dma_addr_t phy_addr;
- int ret;
+ int irq_error, irq_event, ret;
i2c_dev = devm_kzalloc(&pdev->dev, sizeof(*i2c_dev), GFP_KERNEL);
if (!i2c_dev)
@@ -1832,16 +1830,20 @@ static int stm32f7_i2c_probe(struct platform_device *pdev)
return PTR_ERR(i2c_dev->base);
phy_addr = (dma_addr_t)res->start;
- irq_event = irq_of_parse_and_map(np, 0);
- if (!irq_event) {
- dev_err(&pdev->dev, "IRQ event missing or invalid\n");
- return -EINVAL;
+ irq_event = platform_get_irq(pdev, 0);
+ if (irq_event <= 0) {
+ if (irq_event != -EPROBE_DEFER)
+ dev_err(&pdev->dev, "Failed to get IRQ event: %d\n",
+ irq_event);
+ return irq_event ? irq_event : -ENODEV;
}
- irq_error = irq_of_parse_and_map(np, 1);
- if (!irq_error) {
- dev_err(&pdev->dev, "IRQ error missing or invalid\n");
- return -EINVAL;
+ irq_error = platform_get_irq(pdev, 1);
+ if (irq_error <= 0) {
+ if (irq_error != -EPROBE_DEFER)
+ dev_err(&pdev->dev, "Failed to get IRQ error: %d\n",
+ irq_error);
+ return irq_error ? irq_error : -ENODEV;
}
i2c_dev->clk = devm_clk_get(&pdev->dev, NULL);
--
2.7.4
next reply other threads:[~2019-05-16 15:30 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-05-16 15:29 Fabrice Gasnier [this message]
2019-06-12 12:29 ` [PATCH v2] i2c: i2c-stm32f7: fix the get_irq error cases Fabrice Gasnier
2019-06-14 20:53 ` Wolfram Sang
2019-06-17 7:54 ` Fabrice Gasnier
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1558020594-1498-1-git-send-email-fabrice.gasnier@st.com \
--to=fabrice.gasnier@st.com \
--cc=alexandre.torgue@st.com \
--cc=fabien.dessenne@st.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-i2c@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-stm32@st-md-mailman.stormreply.com \
--cc=marc.w.gonzalez@free.fr \
--cc=mcoquelin.stm32@gmail.com \
--cc=pierre-yves.mordret@st.com \
--cc=wsa@the-dreams.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).