From: Xiaowei Bao <xiaowei.bao@nxp.com>
To: robh+dt@kernel.org, mark.rutland@arm.com,
benh@kernel.crashing.org, paulus@samba.org, mpe@ellerman.id.au,
devicetree@vger.kernel.org, linuxppc-dev@lists.ozlabs.org,
linux-kernel@vger.kernel.org, minghuan.lian@nxp.com,
mingkai.hu@nxp.com, zhiqiang.hou@nxp.com, leoyang.li@nxp.com
Cc: Xiaowei Bao <xiaowei.bao@nxp.com>
Subject: [PATCH] powerpc: dts: Fix the bug that intx interrupt not work in P1010RDB-PB
Date: Mon, 20 May 2019 13:53:08 +0800 [thread overview]
Message-ID: <20190520055308.43907-1-xiaowei.bao@nxp.com> (raw)
Due to the INTA is shared with the active-low PHY2 interrupt on P1010RDB-PA
board, so configure P1010RDB-PA's INTA with polarity as active-low, the
P1010RDB-PB board is used separately, so configure P1010RDB-PB's INTA with
polarity as active-high.
The INTX in P1010RDB-PB do not work because of the pcie@0 node fixup will be
overwrited by p1010si-post.dtsi file, so we move the pcie@0 node fixup to
p1010rdb-pb.dts and p1010rdb-pb_36b.dts.
Signed-off-by: Xiaowei Bao <xiaowei.bao@nxp.com>
---
arch/powerpc/boot/dts/fsl/p1010rdb-pb.dts | 16 ++++++++++++++++
arch/powerpc/boot/dts/fsl/p1010rdb-pb_36b.dts | 16 ++++++++++++++++
arch/powerpc/boot/dts/fsl/p1010rdb.dtsi | 16 ----------------
3 files changed, 32 insertions(+), 16 deletions(-)
diff --git a/arch/powerpc/boot/dts/fsl/p1010rdb-pb.dts b/arch/powerpc/boot/dts/fsl/p1010rdb-pb.dts
index 37681fd..6d75e5f 100644
--- a/arch/powerpc/boot/dts/fsl/p1010rdb-pb.dts
+++ b/arch/powerpc/boot/dts/fsl/p1010rdb-pb.dts
@@ -33,3 +33,19 @@
};
/include/ "p1010si-post.dtsi"
+
+&pci0 {
+ pcie@0 {
+ interrupt-map = <
+ /* IDSEL 0x0 */
+ /*
+ *irq[4:5] are active-high
+ *irq[6:7] are active-low
+ */
+ 0000 0x0 0x0 0x1 &mpic 0x4 0x2 0x0 0x0
+ 0000 0x0 0x0 0x2 &mpic 0x5 0x2 0x0 0x0
+ 0000 0x0 0x0 0x3 &mpic 0x6 0x1 0x0 0x0
+ 0000 0x0 0x0 0x4 &mpic 0x7 0x1 0x0 0x0
+ >;
+ };
+};
diff --git a/arch/powerpc/boot/dts/fsl/p1010rdb-pb_36b.dts b/arch/powerpc/boot/dts/fsl/p1010rdb-pb_36b.dts
index 4cf255f..8359035 100644
--- a/arch/powerpc/boot/dts/fsl/p1010rdb-pb_36b.dts
+++ b/arch/powerpc/boot/dts/fsl/p1010rdb-pb_36b.dts
@@ -56,3 +56,19 @@
};
/include/ "p1010si-post.dtsi"
+
+&pci0 {
+ pcie@0 {
+ interrupt-map = <
+ /* IDSEL 0x0 */
+ /*
+ *irq[4:5] are active-high
+ *irq[6:7] are active-low
+ */
+ 0000 0x0 0x0 0x1 &mpic 0x4 0x2 0x0 0x0
+ 0000 0x0 0x0 0x2 &mpic 0x5 0x2 0x0 0x0
+ 0000 0x0 0x0 0x3 &mpic 0x6 0x1 0x0 0x0
+ 0000 0x0 0x0 0x4 &mpic 0x7 0x1 0x0 0x0
+ >;
+ };
+};
diff --git a/arch/powerpc/boot/dts/fsl/p1010rdb.dtsi b/arch/powerpc/boot/dts/fsl/p1010rdb.dtsi
index 2ca9cee..ef49a7d 100644
--- a/arch/powerpc/boot/dts/fsl/p1010rdb.dtsi
+++ b/arch/powerpc/boot/dts/fsl/p1010rdb.dtsi
@@ -215,19 +215,3 @@
phy-connection-type = "sgmii";
};
};
-
-&pci0 {
- pcie@0 {
- interrupt-map = <
- /* IDSEL 0x0 */
- /*
- *irq[4:5] are active-high
- *irq[6:7] are active-low
- */
- 0000 0x0 0x0 0x1 &mpic 0x4 0x2 0x0 0x0
- 0000 0x0 0x0 0x2 &mpic 0x5 0x2 0x0 0x0
- 0000 0x0 0x0 0x3 &mpic 0x6 0x1 0x0 0x0
- 0000 0x0 0x0 0x4 &mpic 0x7 0x1 0x0 0x0
- >;
- };
-};
--
1.7.1
reply other threads:[~2019-05-20 6:01 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190520055308.43907-1-xiaowei.bao@nxp.com \
--to=xiaowei.bao@nxp.com \
--cc=benh@kernel.crashing.org \
--cc=devicetree@vger.kernel.org \
--cc=leoyang.li@nxp.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linuxppc-dev@lists.ozlabs.org \
--cc=mark.rutland@arm.com \
--cc=minghuan.lian@nxp.com \
--cc=mingkai.hu@nxp.com \
--cc=mpe@ellerman.id.au \
--cc=paulus@samba.org \
--cc=robh+dt@kernel.org \
--cc=zhiqiang.hou@nxp.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).