From: Eric Auger <eric.auger@redhat.com>
To: eric.auger.pro@gmail.com, eric.auger@redhat.com,
iommu@lists.linux-foundation.org, linux-kernel@vger.kernel.org,
kvm@vger.kernel.org, kvmarm@lists.cs.columbia.edu,
joro@8bytes.org, alex.williamson@redhat.com,
jacob.jun.pan@linux.intel.com, yi.l.liu@intel.com,
jean-philippe.brucker@arm.com, will.deacon@arm.com,
robin.murphy@arm.com
Cc: kevin.tian@intel.com, ashok.raj@intel.com, marc.zyngier@arm.com,
peter.maydell@linaro.org, vincent.stehle@arm.com
Subject: [PATCH v8 16/29] iommu/smmuv3: Implement cache_invalidate
Date: Sun, 26 May 2019 18:09:51 +0200 [thread overview]
Message-ID: <20190526161004.25232-17-eric.auger@redhat.com> (raw)
In-Reply-To: <20190526161004.25232-1-eric.auger@redhat.com>
Implement domain-selective and page-selective IOTLB invalidations.
Signed-off-by: Eric Auger <eric.auger@redhat.com>
---
v7 -> v8:
- ASID based invalidation using iommu_inv_pasid_info
- check ARCHID/PASID flags in addr based invalidation
- use __arm_smmu_tlb_inv_context and __arm_smmu_tlb_inv_range_nosync
v6 -> v7
- check the uapi version
v3 -> v4:
- adapt to changes in the uapi
- add support for leaf parameter
- do not use arm_smmu_tlb_inv_range_nosync or arm_smmu_tlb_inv_context
anymore
v2 -> v3:
- replace __arm_smmu_tlb_sync by arm_smmu_cmdq_issue_sync
v1 -> v2:
- properly pass the asid
---
drivers/iommu/arm-smmu-v3.c | 57 +++++++++++++++++++++++++++++++++++++
1 file changed, 57 insertions(+)
diff --git a/drivers/iommu/arm-smmu-v3.c b/drivers/iommu/arm-smmu-v3.c
index 724b86ab9a80..b4813f23f302 100644
--- a/drivers/iommu/arm-smmu-v3.c
+++ b/drivers/iommu/arm-smmu-v3.c
@@ -2564,6 +2564,62 @@ static void arm_smmu_detach_pasid_table(struct iommu_domain *domain)
mutex_unlock(&smmu_domain->init_mutex);
}
+static int
+arm_smmu_cache_invalidate(struct iommu_domain *domain, struct device *dev,
+ struct iommu_cache_invalidate_info *inv_info)
+{
+ struct arm_smmu_domain *smmu_domain = to_smmu_domain(domain);
+ struct arm_smmu_device *smmu = smmu_domain->smmu;
+
+ if (smmu_domain->stage != ARM_SMMU_DOMAIN_NESTED)
+ return -EINVAL;
+
+ if (!smmu)
+ return -EINVAL;
+
+ if (inv_info->version != IOMMU_CACHE_INVALIDATE_INFO_VERSION_1)
+ return -EINVAL;
+
+ if (inv_info->cache & IOMMU_CACHE_INV_TYPE_IOTLB) {
+ if (inv_info->granularity == IOMMU_INV_GRANU_PASID) {
+ struct iommu_inv_pasid_info *info =
+ &inv_info->pasid_info;
+
+ if (!(info->flags & IOMMU_INV_PASID_FLAGS_ARCHID) ||
+ (info->flags & IOMMU_INV_PASID_FLAGS_PASID))
+ return -EINVAL;
+
+ __arm_smmu_tlb_inv_asid(smmu_domain,
+ smmu_domain->s2_cfg->vmid,
+ info->archid);
+
+ } else if (inv_info->granularity == IOMMU_INV_GRANU_ADDR) {
+ struct iommu_inv_addr_info *info = &inv_info->addr_info;
+ size_t size = info->nb_granules * info->granule_size;
+ bool leaf = info->flags & IOMMU_INV_ADDR_FLAGS_LEAF;
+
+ if (!(info->flags & IOMMU_INV_ADDR_FLAGS_ARCHID) ||
+ (info->flags & IOMMU_INV_ADDR_FLAGS_PASID))
+ return -EINVAL;
+
+ __arm_smmu_tlb_inv_s1_range_nosync(smmu_domain,
+ smmu_domain->s2_cfg->vmid,
+ info->archid,
+ info->addr, size,
+ info->granule_size,
+ leaf);
+ arm_smmu_cmdq_issue_sync(smmu);
+ } else {
+ return -EINVAL;
+ }
+ }
+ if (inv_info->cache & IOMMU_CACHE_INV_TYPE_PASID ||
+ inv_info->cache & IOMMU_CACHE_INV_TYPE_DEV_IOTLB) {
+ return -ENOENT;
+ }
+ return 0;
+}
+
static struct iommu_ops arm_smmu_ops = {
.capable = arm_smmu_capable,
.domain_alloc = arm_smmu_domain_alloc,
@@ -2584,6 +2640,7 @@ static struct iommu_ops arm_smmu_ops = {
.put_resv_regions = arm_smmu_put_resv_regions,
.attach_pasid_table = arm_smmu_attach_pasid_table,
.detach_pasid_table = arm_smmu_detach_pasid_table,
+ .cache_invalidate = arm_smmu_cache_invalidate,
.pgsize_bitmap = -1UL, /* Restricted during device attach */
};
--
2.20.1
next prev parent reply other threads:[~2019-05-26 16:11 UTC|newest]
Thread overview: 64+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-05-26 16:09 [PATCH v8 00/29] SMMUv3 Nested Stage Setup Eric Auger
2019-05-26 16:09 ` [PATCH v8 01/29] driver core: Add per device iommu param Eric Auger
2019-05-26 16:09 ` [PATCH v8 02/29] iommu: Introduce device fault data Eric Auger
2019-05-26 16:09 ` [PATCH v8 03/29] iommu: Introduce device fault report API Eric Auger
2019-05-26 16:09 ` [PATCH v8 04/29] iommu: Add recoverable fault reporting Eric Auger
2019-06-03 22:31 ` Alex Williamson
2019-06-04 15:48 ` Jacob Pan
2019-05-26 16:09 ` [PATCH v8 05/29] iommu: Add a timeout parameter for PRQ response Eric Auger
2019-06-03 22:32 ` Alex Williamson
2019-06-04 10:52 ` Jean-Philippe Brucker
2019-06-04 15:50 ` Jacob Pan
2019-05-26 16:09 ` [PATCH v8 06/29] trace/iommu: Add sva trace events Eric Auger
2019-05-26 16:09 ` [PATCH v8 07/29] iommu: Use device fault trace event Eric Auger
2019-05-26 16:09 ` [PATCH v8 08/29] iommu: Introduce attach/detach_pasid_table API Eric Auger
2019-05-26 16:09 ` [PATCH v8 09/29] iommu: Introduce cache_invalidate API Eric Auger
2019-05-26 16:09 ` [PATCH v8 10/29] iommu: Introduce bind/unbind_guest_msi Eric Auger
2019-05-26 16:09 ` [PATCH v8 11/29] iommu/arm-smmu-v3: Maintain a SID->device structure Eric Auger
2019-05-26 16:09 ` [PATCH v8 12/29] iommu/smmuv3: Dynamically allocate s1_cfg and s2_cfg Eric Auger
2019-05-26 16:09 ` [PATCH v8 13/29] iommu/smmuv3: Get prepared for nested stage support Eric Auger
2019-05-26 16:09 ` [PATCH v8 14/29] iommu/smmuv3: Implement attach/detach_pasid_table Eric Auger
2019-05-26 16:09 ` [PATCH v8 15/29] iommu/smmuv3: Introduce __arm_smmu_tlb_inv_asid/s1_range_nosync Eric Auger
2019-05-26 16:09 ` Eric Auger [this message]
2019-05-26 16:09 ` [PATCH v8 17/29] dma-iommu: Implement NESTED_MSI cookie Eric Auger
2019-05-26 16:09 ` [PATCH v8 18/29] iommu/smmuv3: Nested mode single MSI doorbell per domain enforcement Eric Auger
2019-05-26 16:09 ` [PATCH v8 19/29] iommu/smmuv3: Enforce incompatibility between nested mode and HW MSI regions Eric Auger
2019-05-26 16:09 ` [PATCH v8 20/29] iommu/smmuv3: Implement bind/unbind_guest_msi Eric Auger
2019-05-26 16:09 ` [PATCH v8 21/29] iommu/smmuv3: Report non recoverable faults Eric Auger
2019-05-26 16:09 ` [PATCH v8 22/29] vfio: VFIO_IOMMU_ATTACH/DETACH_PASID_TABLE Eric Auger
2019-06-03 22:32 ` Alex Williamson
2019-05-26 16:09 ` [PATCH v8 23/29] vfio: VFIO_IOMMU_CACHE_INVALIDATE Eric Auger
2019-06-14 12:38 ` Liu, Yi L
2019-06-14 13:17 ` Auger Eric
2019-05-26 16:09 ` [PATCH v8 24/29] vfio: VFIO_IOMMU_BIND/UNBIND_MSI Eric Auger
2019-06-03 22:32 ` Alex Williamson
2019-06-07 8:30 ` Auger Eric
2019-05-26 16:10 ` [PATCH v8 25/29] vfio-pci: Add a new VFIO_REGION_TYPE_NESTED region type Eric Auger
2019-06-03 22:31 ` Alex Williamson
2019-06-07 8:28 ` Auger Eric
2019-06-07 12:47 ` Jean-Philippe Brucker
2019-06-07 16:29 ` Alex Williamson
2019-05-26 16:10 ` [PATCH v8 26/29] vfio-pci: Register an iommu fault handler Eric Auger
2019-06-03 22:31 ` Alex Williamson
2019-06-04 16:11 ` Auger Eric
2019-06-05 22:45 ` Jacob Pan
2019-06-06 18:54 ` Jean-Philippe Brucker
2019-06-06 20:29 ` Jacob Pan
2019-06-07 7:02 ` Auger Eric
2019-06-07 10:28 ` Jean-Philippe Brucker
2019-06-07 17:43 ` Jacob Pan
2019-06-10 12:45 ` Jean-Philippe Brucker
2019-06-10 21:31 ` Jacob Pan
2019-06-11 13:14 ` Jean-Philippe Brucker
2019-06-12 18:53 ` Jacob Pan
2019-06-18 14:04 ` Jean-Philippe Brucker
2019-06-19 0:19 ` Jacob Pan
2019-06-19 11:44 ` Jean-Philippe Brucker
2019-07-11 13:07 ` Auger Eric
2019-06-07 12:48 ` Jean-Philippe Brucker
2019-06-07 14:18 ` Auger Eric
2019-05-26 16:10 ` [PATCH v8 27/29] vfio_pci: Allow to mmap the fault queue Eric Auger
2019-05-26 16:10 ` [PATCH v8 28/29] vfio-pci: Add VFIO_PCI_DMA_FAULT_IRQ_INDEX Eric Auger
2019-06-03 22:31 ` Alex Williamson
2019-06-04 16:11 ` Auger Eric
2019-05-26 16:10 ` [PATCH v8 29/29] vfio: Document nested stage control Eric Auger
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190526161004.25232-17-eric.auger@redhat.com \
--to=eric.auger@redhat.com \
--cc=alex.williamson@redhat.com \
--cc=ashok.raj@intel.com \
--cc=eric.auger.pro@gmail.com \
--cc=iommu@lists.linux-foundation.org \
--cc=jacob.jun.pan@linux.intel.com \
--cc=jean-philippe.brucker@arm.com \
--cc=joro@8bytes.org \
--cc=kevin.tian@intel.com \
--cc=kvm@vger.kernel.org \
--cc=kvmarm@lists.cs.columbia.edu \
--cc=linux-kernel@vger.kernel.org \
--cc=marc.zyngier@arm.com \
--cc=peter.maydell@linaro.org \
--cc=robin.murphy@arm.com \
--cc=vincent.stehle@arm.com \
--cc=will.deacon@arm.com \
--cc=yi.l.liu@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).